Results 1 to 8 of 8
Thread: Just Duct it!
01-19-05, 08:09 AM #1
- Join Date
- Jan 2005
Just Duct it!
OK, so i gave my friend an old case of mine, because its bigger than his old one and has better airflow. I told him there was a better way to cool his oced cpu which was reaching temps of 55c + which i didnt like to see at all. Of couse he was excited to do anything that would like him run more stable. So we scoured his garage for somthing that we could use as a duct. We found some roof flashing, its a very thin tin. about 1/32 of an inch thick... it was perfect for cuting and bending to our will. Cut it to shape and covered every part on the outside with electrical tape for extra insurance and becaue it looked better than way. The duct fit over the Fan that sits on the heat sink for the cpu and then went to an open fan socket so it would pull in cool air from outside the case and the cpu temp droped 15 deg normal and 10deg full load! The case temp also droped about 12deg C and the PSU blows out cool to warm air instead of hot. So basicly the cpu heats the entire case... cool that and everything eles most likely cools down at leaste 5deg! If your looking for somthing astedicly pleasing try some clear acrilic and cool cathod lights to spice it up, all of your friends will be in aw as they see you temps stay at a cool 40c~
01-19-05, 10:11 AM #2
Nice results. ..Good job!
WELCOME TO THE FORUMSMOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36°C / Syst. temp 23°C /Ambient 20°C (room temp)
F@H TEAM 32 :thup:
01-19-05, 11:10 AM #3
Hey, good job, and welcome to the Forums.
But be careful though, once you get the modding bug, you could have it for life!
01-19-05, 05:56 PM #4Originally Posted by Maester_advent1
How about a pic?-- W3570 @ 3.8 P6TD on Swiftech H20-220
-- QX9650 P5K-E on Swiftech H20-220 water, ATI 3870, G.Skill PC 8500.
The only thing for sure, is that nothing is for sure!
01-19-05, 06:53 PM #5Originally Posted by Maester_advent1
Here's my "ghetto" cooler and filter that uses pretty close to the same principle, just different material. http://webpages.charter.net/bobad/cool.htm-=Bob=-
P8Z68-V, 2500K@4.5Ghz VCore 1.300
2x4gb Ripjaws X @9-9-9-24, VRAM 1.5
Hyper212+ cooler, <15▲ idle, <37▲ load
Antec Three Hundred Two case
Antec Neo Eco 520w PS
Giga GTX 550 Ti 1Gb gddr5
Samsung 840 Pro 256Gb, WD 800Gb
01-20-05, 12:19 AM #6
Good job and Welcome to the addiction.
Originally Posted by FoxBatI am the Senior Omega of the Delta ... Fan Users :burn:
Custom 48" X 24" X 12" Case- Abit IC7-MAX3 - Pentium 4 3.4 EE @ 4.2 |Mach II Phase Cooled
BFG 6800 Ultra @ 470 | NV-68 Water Cooled -1.5 GB PQI PC4400 -1 KW PCP&C -
2 X Raptor 150GB RAID 0 , 2 74GB Raptor RAID 1, 1 36GB Raptor, 1 250GB WD SATA
BIX3 w/ 3 GFB1212VHW Fans (660 CFM Total) -Case Fans 5 EFB1212SHE (710 CFM Total)
MB / RAM Cooler 2 TFB1212GHE (440 CFM Total)
:cool: 1800+ CFM of Pure Delta Coolness :cool:
Someone Help you out? Post a Thank you here. Project Denali Heat
01-20-05, 01:23 AM #7
i haven't even had a chance to mod anything like i want because of finiancial reasons and lack of tools. it's killing me. i got a new drill for chrismas and i am dying to use it on the ol' computer case. ARGHAMD Athlon 3200+@400MHz,
AOpen AK86-L chipset:K8T800,
Kingmax 512MB PC3500@400MHz,
Sapphire Radeon 9800Pro,
Aspire (turbo) 520W PSU,
120GB Maxtor 7200rpm, 80GB Samsung 7200rpm,
2 300GB Seagate Barracudas in RAID 0,
lite-on dvd-rom, NEC dvd-rw dual-layer
carpe the diem: sieze the ... carp!:sn: from the movie "out cold"
01-20-05, 09:49 AM #8
well everyones said it but nice job and cool temps!
btw welcome to the wickedcool forums...My Rig:
HOT Athlon XP 2600 T-Bred :: GA-7M400M Gigabyte Mobo
Asus 9600XT OC from 500/300@580/360 stock! :: 512 MB 333Mhz Spektek Ram
Crappy 80 Gig HDD :: Sony CD Burner/dvd drive + CD drive
If You'll Excuse Me, I Have A Beam Of Light To Catch.