4Ghz Club

nikhsub1 · Feb 23, 2005

waddupmm · Feb 23, 2005

Im not sure if there is a differance I would imagine not if their is only a bios section for the ic7-g on abits site

oRIDDLERo · Feb 23, 2005

ya i just got real scared lol, i looked at pix on the site and it had a little "advanced max II" on the bottom right of the box...

http://www.monarchcomputer.com/ImageViewer/images/110235_2.jpg

Phew.. that was a close one

xTrEmEoVrClOcKr · Feb 24, 2005

Mine passed prime for 24 hours, but if this sounds believeable, I didn't screenshot it *hits self*

Mr.Guvernment · Feb 24, 2005

i can fully agree - it needs to be stable - i do not run my @ 4ghz cause my ram is sucking up 3volts!! and my temps hit 60C - so until i get better ram and my WC i wont, but once i get all that iwill be happy to run my system as fast as i can get it - being totally stable.

On that note, i have had a system where prime95 fails instantly yet i can use it for hours on end gaming / compressing / using daily apps / inwamp / IM's / outlook and run seti or boinc and it is fine........

Alcoholiday · Feb 25, 2005

Currently running at Ghz:4.0 (vcore 1.55)
3.2E Stepping DO (SL7KC) FPO# 3439A123
Mobo:Abit IC7-g (no moods, only sinked mosfets)
Max FSB:254 (Corsair Twinx 4000) @2.8v
Dual Heatercore/DD TDX
Temp idle, 45 Load 53

Brad84cnc · Feb 25, 2005

Mr.Guvernment · Feb 25, 2005

Alcoholiday nice work - and ncie wallpaper, can we see the whole thing

Sentential · Feb 26, 2005

Just doing some initial testing @ 1.44v @ 16x251. Cooling is my TR XP90. Pix:

More pix:

Mr.Guvernment · Feb 26, 2005

Sentential
- u got too mnay icon in your system tray

oRIDDLERo · Feb 26, 2005

Sentential, Whats up with starting and stoping prime in under a minute twice?

Sentential · Feb 26, 2005

oRIDDLERo said:
Sentential, Whats up with starting and stoping prime in under a minute twice?

Unless its at 100% load it wont show the true speed. It took me 2 tries to get a 4ghz screenshot

DanIdentity · Feb 26, 2005

Sentential said:
Unless its at 100% load it wont show the true speed. It took me 2 tries to get a 4ghz screenshot

I thought you said you could disable the throttling with RM Clock?

mattspalace · Feb 26, 2005

Put this in your pipe and smoke it

This is on air too.

I'll add more benchies as I run them.

1M digits in superpi = 32sec
Sandra bandwidth = 6200mb/s
3DMark2001 = 28501 (non oc'd x800 PE)
3DMark2003 = 13702 (non oc'd x800 PE)
Sandra CPU Arithmetic = 12472 MIPS / Dhrystone
Sandra CPU multimedia = Integer 30131 / Floating Point 40303

*note to self* When the rig is running good, leave well enough alone Matt!

MikeyLikesItSI · Feb 26, 2005

Screen Shot

4171 Mhz
P4 630 N0 SL7Z9 COSTA RICA
277 FSB
Swiftech MCP650 pump, swiftech dual 120mm rad, Danger Den TDX water block

busta` · Feb 26, 2005

*MAX STABLE OVERCLOCK*

Identify your Max Mhz ------> 4.05GHz
Identify CPU Type & Stepping ------> P4 3.4E Stepping D0
Identify your Max FSB ------> 238MHz
Identify the type of cooling used ------> Modified Tt Aquarius2 38°c idle / 50°c load

count minaba · Feb 26, 2005

I made 4ghz+ at last with my 3.4E D0 SL7E6!
4016 mhz with 17x236fsb and memory 1:1, Vcore 1.4875v, Vagp 1.65v, DDR at 2.72v.
CPU peaked at 55C during a successful run thru of 3Dmark 2001... ambient room temp is 22.2C.
Also ran SuperPi 1mg test in 33sec as well as Sandra 2005se Memory Bandwith and CPU Arithmetic tests.

I believe the OTES mod I did a few days ago helped the PWM to hang in there using my Antec 430w Truepower PSU, which is the weakest link getting this Prescott rig past 4ghz.

I'm finally a content little overclocker

Mr.Guvernment · Feb 26, 2005

Vcore 1.875v ouch!!!!!

count minaba · Feb 26, 2005

Mr.Guvernment said:
Vcore 1.875v ouch!!!!!

Made a typo... actually 1.4875 Vcore

outhouse · Feb 27, 2005

oh im in just to stupid to know how to take a screen shot lol

3.2 @4g 1.56cv all air took 3 days and blowing a cheap power supply with a new MB ac7-g do stepping without even looking just buying got lucky.

ill get a new sig soon 3.2@4g/lapped 512 kingston zalman\copper\lapped\ducted antec550 as5 pny 6200

4Ghz Club

Unoriginal Macho Moderator

Disabled

Member

member

Member

Registered

Member

Member

Contributing Member

Member

Member

Contributing Member

Member

I been Dolk'ed Senior

Member

Member

New Member

Attachments

Member

New Member

Senior Member

Similar threads