What does your Venice or San Diego overclock to?

SteveLord · May 15, 2005

please add your cooling methods people!!!

Mr. Cornell · May 16, 2005

This poll would be a lot more useful if you had separate options for Air, Water, and High-End cooling setups in the poll itself.

rdrash · May 16, 2005

here is my cpu-z verification shot:

There is another thread here that I posted my SuperPi results in....but I will post again:

EDIT: forgot to mention this is on stock HSF.

Supertrucker · May 16, 2005

2695mhz [email protected](bios)vcore fluctuates between 1.49 and 1.568 in cpuid
3700+ san diego core CABGE 0513(might have been 0514, didnt write it down)
Koolance case(1/4 id for the win!

) with two additional sunon ~50cfm fans for exaust
fortron alx500 psu
2x1gb pc3200 @ 192mhz 2.5-3-3-7
gigabyte K8NS-Ultra939
i stopped prime(blend) at 11 hours

got a dfi ultra d and an evga pci e 6800gt waiting for an install, ill let yall know if i get a more stable vcore and better overclock

g0dM@n · May 17, 2005

You can't clock your ram higher with 2x1gb? I know 2gigs is a lot, but I thought that the new cores can handle a little more... have you tried anything around 200-215 on 1:1 just to see if it works?

Robert · May 18, 2005

I will go to pickup my A64 3200+ Venice today. It should do a lot better than my CBBID. If I am lucky enough, it would go all the way to 2.9Ghz.

Burnt_Ram · May 18, 2005

Robert said:
I will go to pickup my A64 3200+ Venice today. It should do a lot better than my CBBID. If I am lucky enough, it would go all the way to 2.9Ghz.

what do you plan on cooling it with ? mine will do 2.9 np at 1.45v

but i'm having problems cooling so i went back to stock vcore ...

whoever · May 18, 2005

2.75 with 3200+ on Water 1.6v 270X10

Honestly I think the 3000+ are the best option is seems like more than half of these chips just die out at 2.7 no matter the temp, board, or Voltage. And almost every Properly Oc'd 3000+ I've seen can do 300X10. i think I wasted $50.

Robert · May 18, 2005

I will use Thermaltake Tower 112 Cu with Vantec Tornado 80mm. My stock speed cpu load at 38C and idle about 31C. I have no idea if it is good enough cooling. I wonder what is the water cooling average temperature with this type of CPU.

*update*
ADA3200DAA4BP
LBBLE 0515APAW

Supertrucker · May 18, 2005

Oh the ram can easily do 215 2.5 3 3 7, as can the cpu, but the ram cant do 245 at any timings/volts that i have access to and the highest divider(166) in bios makes the ram 192 with a 245 htt, thats part of the reason i got the dfi, was for more ram options. Now all i need to do is get my WoW disks back from a friend so i can format and install these parts, yeah i know, its lame that i cant go without my WoW for a couple days

Gnerma · May 18, 2005

From looking around, it doesn't seem like people are getting much extra speed on water compared to decent air. But who knows, so please post all the info I asked for in the first post guys. The poll can't be perfect and we need more details to get a good idea of what is going on with these chips.

Hoot · May 20, 2005

My 3700 SD is on the front porch as I write this. Unfortunately, I have a busy weekend of honey-do's waiting for me, but I'll certainly try to get it in and up on water sometime.

Hoot

JackCarver · May 20, 2005

hmmm

Im only on air...lowly stock HSF...

2800Mhz... 255 x11, 255 HTT (x3) Vcore 1.250 + 126% = 1.50Vcore

3700+ SD, cabbage special, ADA3700DAA5BN CABGE 0515 SPMW

Thats with 4x 512M Twinmos TMII UTT, 8,2,2,2.0 2T @ 3.4V (using 5V) on DFI NF4 Ultra-D converted to SLI-D. X850XT @ stock, 2x 36G Raptor raid0.

It fails prime/Superpi 32M at 260Mhz x11, 260Mhz x10 is fine, as is 250-255Mhz x11. SO much over 2.80Ghz on stock cooler is too much.

Low 30C's idle, to high 40C's load on stock AMD retail HSF.

SuperPi (mod 1.4) 1M= 30.156sec, 32M= 26min39.281sec

The 260x11 1M is 29.500sec but 32M fails.

Burnt_Ram · May 20, 2005

latest result. 1 hour prime95, 3dmark2001, and 32m super pi stable sofar

35c/47c idle/load

Hoot · May 20, 2005

Hoot said:
My 3700 SD is on the front porch as I write this. Unfortunately, I have a busy weekend of honey-do's waiting for me, but I'll certainly try to get it in and up on water sometime.

Hoot

My chores are done for the evening. I'm going to run a few benchmarks with the Winchester at 10x200, memory at default 200 Mhz 2-2-2-5. Then I'll put in the SD and if it hopefully boots, I'll try setting the 2T timing to 1T using A64 Tweaker and run the same benchmarks. This is just to see what difference the core and extra L2 Cache makes. Then maximum OC at various multiplier and FSB settings. I will not be able to report the temperature difference as the circuitry on my motherboard for that function is permanently disabled. I read my temperature with an AMD approved external reader like the one pHaestus uses. Since that involves a major mod to the CPU and wanting to preserve the warranty for the moment, I'll wait a few days on that, as well as removing the IHS.

Be back in about a half hour...

Hoot

Hoot · May 21, 2005

Okay, it took me more than a half hour, but this is virgin territory for me and a sizable investment to take care of. I only did brief benchmarks, namely SuperPi and 3D Mark 2001se. After typing this, I'm off to bed while the rig runs Prime95 Torture In-place large FFTs.

Here's what I got so far:

Vcore and Vdimm measured at the socket.

11x240 @ 1.41 Vcore Memory 200 Mhz 2-2-2-5 @ 2.75 Vdimm

11x250 @ 1.47 Vcore Memory 208 Mhz 2-2-2-5 @ 2.75 Vdimm

11x260 @ 1.57 Vcore Memory 217 Mhz 2-2-2-5 @ 2.75 Vdimm
Note: I could not run my memory at this speed and timings with the Winchester.

Sorry I'm too pooped to do more tonight. I imagine the AS5 has not settled in yet, so I may be able to get more tomorrow in between honey-do's. Now, I'll fire up Prime95 and see if its still running when I get up.

I'm impressed so far...

Hoot

Quick Edit: Despite running SuperPi and 3D Mark 2001se fine, it didn't last 10 second in Prime95 Torture. Oh well... More of a challenge these next few days.

Hoot

Burnt_Ram · May 21, 2005

Hoot:

whats the stepping of you 3200+ ?

Hoot · May 21, 2005

Burnt_Ram said:
Hoot:

whats the stepping of you 3200+ ?

You mean my Winchester? It's a CBBFD 0441 UPBW

The San Diego is a CABGE 0515 SPMW

The Wife and daughter are out running errands, so I'm back at it for a while. Lots of combinations I'm finding that run SuperPi and 3D Mark 2001se but fail miserably in Prime95 Torture In-place Large FFTs. The most interesting observation so far, besides the difficulty finding a combination that passes P95, is 11x270 Passes MemTest86, but 10x270 fails, all else being the same.

Lest I forget, all speeds and timings being the same, the SD runs 3D Mark2001se 5% faster than the Winchester and SuperPi 1M 3% faster.

Back to testing...

Hoot

hitechjb1 · May 21, 2005

Stability testing using memtest, SuperPI (32M) and Prime95

masterwoot · May 21, 2005

Venice 3500+ LBBLE 2.855ghz @ 1.54V w/ 18+hours Prime95 large FFT stable, 32M Super PI stable, and megahours of CS:Source stable

.

Air cooled w/ XP-90 and tornado @ 3000rpm for 33C idle and 44C load

(This may is hopefully not my max OC on the chip as I just got her).

What does your Venice or San Diego overclock to?

What does your Venice or San Diego overclock to?

Less than [color=red]2450[/color] Mhz

Between [color=red]2451[/color] Mhz & [color=red]2550[/color] Mhz

Between [color=red]2551[/color] Mhz & [color=red]2650[/color] Mhz

Between [color=red]2651[/color] Mhz & [color=red]2750[/color] Mhz

Between [color=red]2751[/color] Mhz & [color=red]2850[/color] Mhz

Between [color=red]2851[/color] Mhz & [color=red]2950[/color] Mhz

Between [color=red]2951[/color] Mhz & [color=red]3050[/color] Mhz

Between [color=red]3051[/color] Mhz & [color=red]3150[/color] Mhz

Between [color=red]3151[/color] Mhz & [color=red]3250[/color] Mhz

More than [color=red]3250[/color] Mhz

Member

Member

Senior Member, Benching Team Member

Way Too Jealous Member

Inactive Moderator

Member

Member

Member

Member

Way Too Jealous Member

Senior Member

Inactive Moderator

Registered

Member

Inactive Moderator

Inactive Moderator

Member

Inactive Moderator

Senior Member

Member

Similar threads