Full DFI Ultra/SLI BIOS List

Here you guys go I will update as needed have fun!!!

(-1 for TCCD/Micron/UTT-CH/UTT-BH/BH/CH This is the general bios that should work ok but is not optimized for any specific memory, -3 for TCCD/Micron, -2 for UTT-CH/UTT-BH/BH/CH)

Stock Bios

1.19 http://indabasement.com/DFINF4/bios/NF4LD119.rar
These are the stock BIOS that shipped with the R.A00 boards

1.25 http://www.dfi.com.tw/Upload/BIOS/NF4LD125.zip
These are the stock BIOS that shipped with the R.A01

1.26 http://www.dfi.com.tw/Upload/BIOS/NF4LD126.zip
Not completely sure about the info on these BIOS if any one has input on them please PM me

2.01 http://www.dfi.com.tw/Upload/BIOS/NF4LD201.zip
1.LDT default set at 5x.
2. Fixed IR connection failure.
3. Fixed Boot failure when installing certain CL2 memory modules.

2.09 http://oskarwu.myweb.hinet.net/dfi/...os/N24LD209.rar
1. Update nvmm module to 4.79
2. Update nv raid rom to 4.81
3. Added memtest86+ option (memtest86+ 1.50 verison)
4. Fix serial ata 3/4 disable but connect two hdd in serial ata 1/2 as raid drive , the raid array will not be correctly configured

2.17 http://oskarwu.myweb.hinet.net/dfi/...os/nf4ld217.rar
Fixes:
Update memtest86+ 1.51 (New Features Added support for Intel i955X (Glenwood)
Added support for nVidia nForce4)
Bug Fixes:
Fix a bug on K8 chipset recognition
Fix Dual channel not detected on i865/875 (Bug added in V1.50)
Some minor bug fixes
Load Optimized Default =>Tref 3120 Cycle => fixed Corsair XPERT & OCZ
VX Memory Steady

2.18 http://www.ocxtreme.org/onepagebook/nf4ld218.rar
Tweaked 2.17

3.10
http://www.dfi.com.tw/Upload/BIOS/NF4LD310.zip
1.NVMM 4.85 and NV RAID 4.81.
2. Enhanced memory compatibility.
3. Enhanced USB compatibility.
4. Enhanced the support of Athlon 64 in version E3(Venice).
5. Beta, apparently the same as Oskar Wu's modded 3.10-2

3.10p http://home.no/trac3r/Bios/DFI.LANPARTY.NF4/N4D310p.zip
Tweaked 3.10

3.14 http://home.no/trac3r/Bios/DFI.LANPARTY.NF4/NF4LD314.zip
Not completely sure about the info on these BIOS if any one has input on them please PM me

3.16 http://home.no/trac3r/Bios/DFI.LANPARTY.NF4/NF4LD316.zip
Enable the 1+3 yellow slot dims
Enables all 4 DIMM slots

3.25 http://homepage.ntlworld.com/a.leach80/NF4LD325.zip
1. Optimized for BH-5 and VX
2 options for drive strength


Oskar Wu’s modded bios

3.09-2 (beta) http://oskarwu.myweb.hinet.net/dfi/.../NF4LD309-2.zip
NVMM 4.71 & NV RAID 4.78
please change Max async from 7ns to Auto

3.10-2 (beta) http://oskarwu.myweb.hinet.net/dfi/.../NF4LD310-2.zip
NVMM 4.85 & NV RAID 4.81
please change Max async from 7ns to Auto

3.26 http://mitglied.lycos.de/siedl/dfi3...wu/NF4LD326.zip
Fix mem divider bug.

3.31-3 http://oskarwu.myweb.hinet.net/dfi/...os/N4D331-3.zip
3.31 with 3.10 ram table
Memtest86+ update
Modified 3.26

3.31-2 (with 3.16 ram table) http://oskarwu.myweb.hinet.net/dfi/...os/N4D331-2.zip
3.31 with 3.16 ram table
Memtest86+ update


3.31-1 http://oskarwu.myweb.hinet.net/dfi/...os/N4D331-1.zip
3.31 with 3.10 ram table
Memtest86+ update

4.14-3 http://home.no/trac3r/Bios/DFI.LANP...F4/N4D414-3.zip
Added support for Venice and San Diego Cool n Quiet (TCCD)


4.14-2 http://home.no/trac3r/Bios/DFI.LANP...F4/N4D414-2.zip
Added support for Venice and San Diego Cool n Quiet (BH-5,UTT)

4.14-1 http://home.no/trac3r/Bios/DFI.LANP...F4/N4D414-1.zip
Added support for Venice and San Diego Cool n Quiet (TCCD)

5.9-3 http://www.techpowerup.com/articles/114/images/N4D509-3.zip
Adds X2 support

5.9-2 http://www.techpowerup.com/articles/114/images/N4D509-2.zip
Adds X2 support

5.9-1 http://www.techpowerup.com/articles/114/images/N4D509-1.zip
Adds X2 support

5.10-3 http://oskarwu.myweb.hinet.net/dfi/betabios/N4D510-3.zip
Same as 5.09 Adds X2 support DRAM response time value for value ram

5.10-2 http://oskarwu.myweb.hinet.net/dfi/betabios/N4D510-2.zip
Same as 5.09 Adds X2 support DRAM response time value for value ram

5.10-1 http://oskarwu.myweb.hinet.net/dfi/betabios/N4D510-1.zip
Same as 5.09 Adds X2 support DRAM response time value for value ram


HellFire Modded Bios

5.10-2 http://www.sonicxhosting.com/bios/N4D510-XCEL2-LL.rar
Modded 5.09 with modded 3.16 ram table
Adds X2 support


(-1 for TCCD/Micron/UTT-CH/UTT-BH/BH/CH This is the general bios that should work ok but is not optimized for any specific memory, -3 for TCCD/Micron, -2 for UTT-CH/UTT-BH/BH/CH)


Bios flash guide (Thank Pershoot for these flash guides)

Bootable Floppy (Self Xtracting EXE) DOS Image w./ 310 Final:
http://indabasement.com/DFINF4/bios/DOS-With-310_PUBLIC.exe

Insert floppy -> Double click .exe -> follow the prompt (you can just hit ok, defaults should be fine) -> when booting off floppy at the A: prompt to flash to 310 -> type flash and hit enter.

Bootable CDROM (ISO) DOS Image w./ All Bios Revisions to Date (4/1/05):
http://indabasement.com/DFINF4/bios/DFI_BIOSROM.rar

ex: To Burn With Nero: Launch Nero -> Burn -> Image (nero6) or File -> Burn Image (nero5). Set First Boot to CDROM -> Follow On Screen Instructions to Flash.

How-To Flash Bios:
grab a bootable pure dos floppy disk (you can download dos image with 310 public release (NOT the "P" performance/beta version, but final version) on it, to be written to floppy above OR download bootable CDROM image w./ all bioses OR you can make one through your operating system: right click a: in my computer -> format -> check make ms dos startup disk) and place awdflash and bios file on this floppy. these can be found (dos flash util and bios file) above.

enter bios -> load optimised defaults -> y->save -> boot off disk -> follow flash instructions in the .txt that comes with awdflash.rar OR type 'flash' at A:, if using bootable dos image w./ 310 on it OR follow on screen instructions if using bootable CDROM image. If using the 'awdflash.rar method', remember to replace BIOSFILE.BIN with bios filename (awd859e BIOSFILE.BIN /py /sn /cd /cp /cc /LD /R /f) -> after it is done, it will reset on its own -> after reset, enter bios -> load optimized defaults->y->save->after POST finishes -> shutdown ->switch off PSU -> unplug -> wait for yellow lights to turn off -> press power a few times-> set clear CMOS jumper -> wait for 10 minutes->set jumper back -> plug in ->switch on -> power up -> enter bios -> load optimised defaults -> now configure your bios.

You guys can thank NiCKE^ for all of the bios info

Dragon AKA Duke/ Pershoot/ NiCKE^