Guys, I have some good news to report! I just fitted a CNPS9500 to my dothan, and my temps are 33 idle and 41 load under prime. I can probably push it past the 2.7ghz mark with this, though I'm not going to because I'm already at 1.5375v in bios (1.50v actual). Still, this means that I don't have to back my clock down 70mhz in summer anymore, and it doesn't spontaneously overheat.
The cooler:
http://www.silentpcreview.com/article267-page1.html
The mod is simple. You must take pliers and bend the clip to a sharper angle as to give proper pressure. A warning, though, there is a bit of trial and error, and if you bend the clip too much, you risk crushing your core. It takes a bit of patience to get it just right, but trust me the results are worth it.
The cooler:
http://www.silentpcreview.com/article267-page1.html
The mod is simple. You must take pliers and bend the clip to a sharper angle as to give proper pressure. A warning, though, there is a bit of trial and error, and if you bend the clip too much, you risk crushing your core. It takes a bit of patience to get it just right, but trust me the results are worth it.