Results 1 to 12 of 12
07-19-05, 02:37 AM #1
- Join Date
- Jul 2005
So frustrating....assembling my first PC
Well I knew this wasn't going to be easy but I didn't know I would have to bleed for this. I wonder what else this night has in store for me. Here's a timeline of events for you all.
5:10 pm Recieve cpu from UPS guy. Get all the materials ready for building the comp.
6:00 pm All I've accomplished is putting the cpu in the socket putting MORE than enough AS5 on the cpu and putting the XP-90 in place and securing it to the bracket. I also got AS5 on my skin which isn't bad but could have been prevented = noob mistake. Than dinner.
6:30 Return to comp. Takes 10 MINUTES just to put fan clips on the XP-90. I couldn't figure out which way they were supposed to go. After this I put the OCZ ram in, in the yellow slots too. The XP-90 is also "hanging over" the ram to help cool it.
This is the order I put stuff in the case (it was probably wrong or more time consuming/difficult)
plugged front USB and LEDs into mobo (did the LEDs wrong )
Here comes the really good part. When I was poking the drive bay cover out with a pair of scissors from inside the case I cut a gash in my finger and blood was gushing everywhere, even a drop or two on the mobo ) After some ranting and argueing w/ parents whether I needed stiches or not I got a coke and watched some tv with a paper towel around my finger. The "shelf" thing where the floppy rest was sharp and I think I cut myself on that. Stupid $28 case.
floppy and HD ("shelf" where HD rested was screwed up and didn't match the holes on the HD so 2 screws on one side are holding the HD in.)
NEC 3540A DVD burner
plugged all the IDE and power cables in
I was hungry so I went to the kitchen and had a peanut butter & fluff sandwich with some ho ho's and chocolate milk. . Mind you it was about 12:30 am at this time.
Then I pressed the power button and nothing happened. What a suprise. So I pressed the power switch on the DFI mobo and it booted to life, or was at least making noises and the fans were spinning. After finding out the exhaust fan blew air in and the intake fan blew air out I entered the bios. Then I put my mobo driver cd in only to find something was "not plugged in right" with my media device. I have the IDE cable and the power cable plugged in....
Now its 2:30 am and I'm tired but I must go on and format and install windows. Did I tell you NONE of the front LED's work so I'll have to fix that. O well now I have a band aid around my finger and am ready to go back to work. I"ll keep you posted whether I get this thing to work or go insane.
07-19-05, 05:44 AM #2
Things to think about...
1. Just take your time. It is a great experience, and it is worth the time. I know you are excited, and want to use the computer. But if you rush, you risk further injury to yourself/injury to your computer.
2. Have fun. When it stops being fun, cease work. Go over and watch some Tv or something ."If computers get too powerful, we can organize them into a committee -- that will do them in."
"Why is it drug addicts and computer afficionados are both called users?"
"Home computers are being called upon to perform many new functions, including the consumption of homework formerly eaten by the dog."
07-19-05, 06:11 AM #3
Barret has some good advise. When things start to go bad, take a break and come back with a fresh outlook on the problem. Just keep in mind when your done you will have a killer rig that you built to be proud of.
As for you front LED's, try turning the plug around on the mobo. I always seem to get one backwards on the frist try. Check your power switch conector to, make sure you got the right pins on the front panel connectors.
07-19-05, 08:41 AM #4
yeah avoid frustration cause to much makes you do stupid thingscurrent
INTEL e8400 3900 mhz Xp-120 xtreme
4gb 2x1024 OCZ PLAT 800 ddr2
XFX 8800gts :santa:
my good old lian li pc60 :beer:
check my mame project here
07-19-05, 10:19 AM #5
Do it slow, and check, recheck, and then do it all over again. I had to do it slow, as I got my parts over the course of 5 weeks, so I had plenty of time to check over everything I did.
07-19-05, 10:49 AM #6
Yeah, slow down! No ones timing you, it isn't a race, you don't get a prize if you get it done soon! It does take a lot of time to put everything together from scratch...and when your down you'll have to swim/crawl/gasp for air trying to get through the boxes, peanuts, styrofoam and whatever else is left over!i5-3570k @ 4.5ghz WC'd
256GB Samsung 840
"Computer games don’t affect kids; I mean if Pac-Man affected us as kids, we’d all be running around in darkened rooms, munching magic pills and listening to repetitve electonic dance music..." - Kristian Wilson, Nintendo Inc, 1989
07-19-05, 12:11 PM #7Originally Posted by Weezynin3r
07-19-05, 02:25 PM #8
i didn't read you saying that you plugged in the cables from the case onto the motherboard (for the LED, power switch, and reset switch). Read through the manual and follow it step by step. There are also thousands of guides on the net on how to put together a pc.
here is my order:
(either psu here)
optical drives (cd/dvd/floppy)
(or psu here)
I believe that is about it, then you should plug everything in, ide cables/sata cables, cables from the case (led/reset/power like I mentioned earlier - and also front usb or what have you), then finally power cables.Haswell Benching and Gaming: ASRock Z87 OC Formula : Intel i7 4770k w/ Phanteks PH-TC14 : 16GB 4x4GB G.Skill TridentX DDR3-2666 : 2x R9 290X
Other Components: Samsung 840 Evo 500GB SSD : 2TB Hitachi 7200rpm : Seasonic Platinum 1000W : Auria EQ276W 2560x1440, Crossover P27Q 2560x1440, Dell 2407WFP 1920x1200
07-19-05, 03:08 PM #9
- Join Date
- Jul 2004
yeah just take your time, thats what i did on my first build. its a shame that i spent about 5 hours perfecting that build only to find out that i forgot to mount my mobo on standoffs....lol, at least u didnt do that
just out of curiousity, what case are you using weezy?
07-19-05, 03:22 PM #10
- Join Date
- Jul 2005
UPDATE: After calling it quits at 4:30 am I went to bed. You guys are right, slow and steady wins the race. I'm typing this on the new built rig I have a 4 gig partition for the windows install and the other partition is for other stuff. I'm using this case http://www.newegg.com/Product/Produc...82E16811150017
I'm so glad everything's working fine. The only thing is my blowhole fan doesn't fit b/c my PSU is too big, so now I have a hole in the top of my case. Will have to fix that. Now all I have to do is START OVERCLOCKING. I'm definatly taking it SLOW. Don't want to fry anything. The front LED's don't work but the buttons do (power & reset). I think I need to switch the connectors (polarity). I'm going to do benchies at stock and then do 'em after I overclock to compare them. Should I burn in the ram and cpu before I overclock? Thanks.
07-19-05, 04:09 PM #11
- Join Date
- Oct 2004
- Madison, WI
Yes. Run something like folding at home, seti, or prime 95 first to make sure it is completely stable at stock. I think the general recomendation is for about 24hrs. Do this again every step of overclocking, too.20" iMac 2.4Ghz C2D 4GB ram
07-19-05, 04:54 PM #12
- Join Date
- Apr 2005
Thats not a bad looking little case for 30 bucks. Enjoy your new computer!3.4GHz P4 Prescott - MSI 915p Neo2 - MSI X600XT - 1gig Ram - XP-90 w/ Delta EFB0912LE
CM Stacker w/ Black Sides, Window & Crossflow Fan - Panaflow and Delta Case Fans
Sunbeam Fan Controller - Fortron AX500A - Chaintech AV710 - OptiUPS Power ES 1000ES
74gig Raptor - 250gig Caviar - NEC ND3520AW - Logitech MX1000 - XTrac Hammer
Klipsch ProMedia 2.1 - Samsung 913TDell Dimension 8300 - 2.8GHz P4 - 512 meg Ram - 250gig Maxtor
NEC DVD Burner - TDK CD Burner - Samsung 913T - APC CS500Dell Dimension XPS R450 P2 Smoothwall Box