Results 1 to 12 of 12
  1. #1
    Registered
    Join Date
    Jul 2005
    Posts
    75

    So frustrating....assembling my first PC

    Well I knew this wasn't going to be easy but I didn't know I would have to bleed for this. I wonder what else this night has in store for me. Here's a timeline of events for you all.

    5:10 pm Recieve cpu from UPS guy. Get all the materials ready for building the comp.
    6:00 pm All I've accomplished is putting the cpu in the socket putting MORE than enough AS5 on the cpu and putting the XP-90 in place and securing it to the bracket. I also got AS5 on my skin which isn't bad but could have been prevented = noob mistake. Than dinner.
    6:30 Return to comp. Takes 10 MINUTES just to put fan clips on the XP-90. I couldn't figure out which way they were supposed to go. After this I put the OCZ ram in, in the yellow slots too. The XP-90 is also "hanging over" the ram to help cool it.

    This is the order I put stuff in the case (it was probably wrong or more time consuming/difficult)

    mobo
    graphics card
    plugged front USB and LEDs into mobo (did the LEDs wrong )

    Here comes the really good part. When I was poking the drive bay cover out with a pair of scissors from inside the case I cut a gash in my finger and blood was gushing everywhere, even a drop or two on the mobo ) After some ranting and argueing w/ parents whether I needed stiches or not I got a coke and watched some tv with a paper towel around my finger. The "shelf" thing where the floppy rest was sharp and I think I cut myself on that. Stupid $28 case.

    floppy and HD ("shelf" where HD rested was screwed up and didn't match the holes on the HD so 2 screws on one side are holding the HD in.)
    NEC 3540A DVD burner
    Power supply
    plugged all the IDE and power cables in

    I was hungry so I went to the kitchen and had a peanut butter & fluff sandwich with some ho ho's and chocolate milk. . Mind you it was about 12:30 am at this time.

    Then I pressed the power button and nothing happened. What a suprise. So I pressed the power switch on the DFI mobo and it booted to life, or was at least making noises and the fans were spinning. After finding out the exhaust fan blew air in and the intake fan blew air out I entered the bios. Then I put my mobo driver cd in only to find something was "not plugged in right" with my media device. I have the IDE cable and the power cable plugged in....

    Now its 2:30 am and I'm tired but I must go on and format and install windows. Did I tell you NONE of the front LED's work so I'll have to fix that. O well now I have a band aid around my finger and am ready to go back to work. I"ll keep you posted whether I get this thing to work or go insane.

  2. #2
    Member Barret's Avatar
    Join Date
    Jan 2004
    Location
    ^The trunk..
    Posts
    227
    Things to think about...

    1. Just take your time. It is a great experience, and it is worth the time. I know you are excited, and want to use the computer. But if you rush, you risk further injury to yourself/injury to your computer.

    2. Have fun. When it stops being fun, cease work. Go over and watch some Tv or something .
    "If computers get too powerful, we can organize them into a committee -- that will do them in."
    -Bradley's Bromide

    "Why is it drug addicts and computer afficionados are both called users?"
    -Clifford Stoll

    "Home computers are being called upon to perform many
    new functions, including the consumption of homework formerly eaten by the dog."
    -Doug Larson

    My Heat.

  3. #3
    Member johnny5c's Avatar
    Join Date
    Aug 2002
    Location
    St. Paul, MN
    Posts
    283
    Barret has some good advise. When things start to go bad, take a break and come back with a fresh outlook on the problem. Just keep in mind when your done you will have a killer rig that you built to be proud of.

    As for you front LED's, try turning the plug around on the mobo. I always seem to get one backwards on the frist try. Check your power switch conector to, make sure you got the right pins on the front panel connectors.

  4. #4
    Member maxio098ui's Avatar
    Join Date
    Nov 2004
    Location
    amsterdam, in weed state holland
    Posts
    1,185
    yeah avoid frustration cause to much makes you do stupid things
    current
    INTEL e8400 3900 mhz Xp-120 xtreme
    gigabyte X38-dQ6
    4gb 2x1024 OCZ PLAT 800 ddr2
    XFX 8800gts :santa:
    my good old lian li pc60 :beer:


    check my mame project here

  5. #5
    Member NsOmNiA91130's Avatar
    Join Date
    Nov 2004
    Location
    Lawrenceville, NJ
    Posts
    1,508
    Do it slow, and check, recheck, and then do it all over again. I had to do it slow, as I got my parts over the course of 5 weeks, so I had plenty of time to check over everything I did.

  6. #6
    Member attack's Avatar
    Join Date
    May 2002
    Location
    Dayton. OH
    Posts
    4,758
    Yeah, slow down! No ones timing you, it isn't a race, you don't get a prize if you get it done soon! It does take a lot of time to put everything together from scratch...and when your down you'll have to swim/crawl/gasp for air trying to get through the boxes, peanuts, styrofoam and whatever else is left over!
    i5-3570k @ 4.5ghz WC'd
    MSI Z77A-G41
    R9 280X
    2x4gb PC16000
    256GB Samsung 840
    Sennheiser HDR-120's
    Dell U2713HM
    "Computer games dont affect kids; I mean if Pac-Man affected us as kids, wed all be running around in darkened rooms, munching magic pills and listening to repetitve electonic dance music..." - Kristian Wilson, Nintendo Inc, 1989

  7. #7
    Member mage_x's Avatar
    Join Date
    Oct 2002
    Posts
    2,286
    Quote Originally Posted by Weezynin3r
    6:00 pm All I've accomplished is putting the cpu in the socket putting MORE than enough AS5 on the cpu and putting the XP-90 in place
    Exactly how much AS5 did you put on? The amount needed is often VERY over estimated and will actually hurt your temperatures if you put on more than is needed.

  8. #8
    Benching Team Leader
    Grabbed Senior
    Janus67's Avatar
    Join Date
    May 2005
    Location
    Ohio State
    Posts
    12,171
    i didn't read you saying that you plugged in the cables from the case onto the motherboard (for the LED, power switch, and reset switch). Read through the manual and follow it step by step. There are also thousands of guides on the net on how to put together a pc.

    here is my order:


    case
    (either psu here)
    optical drives (cd/dvd/floppy)
    hard drives
    mobo
    cpu
    ram
    heatsink
    video card
    (or psu here)

    I believe that is about it, then you should plug everything in, ide cables/sata cables, cables from the case (led/reset/power like I mentioned earlier - and also front usb or what have you), then finally power cables.
    Haswell Benching and Gaming: ASRock Z87 OC Formula : Intel i7 4770k w/ Phanteks PH-TC14 : 8GB 2x4GB G.Skill TridentX DDR3-2666 : MSI, XFX, and Sapphire R9 290X
    Other Components: Samsung 840 Evo 500GB SSD : 2TB Hitachi : Silverstone Strider Gold 1250W and Seasonic Platinum 1000W : Auria EQ276W 2560x1440


    Folding User Stats

  9. #9
    Member
    Join Date
    Jul 2004
    Posts
    360
    yeah just take your time, thats what i did on my first build. its a shame that i spent about 5 hours perfecting that build only to find out that i forgot to mount my mobo on standoffs....lol, at least u didnt do that

    just out of curiousity, what case are you using weezy?

  10. #10
    Registered
    Join Date
    Jul 2005
    Posts
    75
    UPDATE: After calling it quits at 4:30 am I went to bed. You guys are right, slow and steady wins the race. I'm typing this on the new built rig I have a 4 gig partition for the windows install and the other partition is for other stuff. I'm using this case http://www.newegg.com/Product/Produc...82E16811150017
    I'm so glad everything's working fine. The only thing is my blowhole fan doesn't fit b/c my PSU is too big, so now I have a hole in the top of my case. Will have to fix that. Now all I have to do is START OVERCLOCKING. I'm definatly taking it SLOW. Don't want to fry anything. The front LED's don't work but the buttons do (power & reset). I think I need to switch the connectors (polarity). I'm going to do benchies at stock and then do 'em after I overclock to compare them. Should I burn in the ram and cpu before I overclock? Thanks.

  11. #11
    Member
    Join Date
    Oct 2004
    Location
    Madison, WI
    Posts
    1,280
    Yes. Run something like folding at home, seti, or prime 95 first to make sure it is completely stable at stock. I think the general recomendation is for about 24hrs. Do this again every step of overclocking, too.
    20" iMac 2.4Ghz C2D 4GB ram

  12. #12
    Member
    Join Date
    Apr 2005
    Posts
    173
    Thats not a bad looking little case for 30 bucks. Enjoy your new computer!
    3.4GHz P4 Prescott - MSI 915p Neo2 - MSI X600XT - 1gig Ram - XP-90 w/ Delta EFB0912LE
    CM Stacker w/ Black Sides, Window & Crossflow Fan - Panaflow and Delta Case Fans
    Sunbeam Fan Controller - Fortron AX500A - Chaintech AV710 - OptiUPS Power ES 1000ES
    74gig Raptor - 250gig Caviar - NEC ND3520AW - Logitech MX1000 - XTrac Hammer
    Klipsch ProMedia 2.1 - Samsung 913T
    Dell Dimension 8300 - 2.8GHz P4 - 512 meg Ram - 250gig Maxtor
    NEC DVD Burner - TDK CD Burner - Samsung 913T - APC CS500
    Dell Dimension XPS R450 P2 Smoothwall Box

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •