Results 1 to 17 of 17
  1. #1
    Member ziggo0's Avatar
    Join Date
    Apr 2004
    Location
    La Porte, Indiana
    Posts
    4,729

    Amazing Lapping done by a friend...

    My friend Jod shown me a picture of his P4:



    So I'm like, whats the big deal about that? Just an ordinary P4...till he shown me this:



    I haven't seen very many lap jobs done on a IHS, but that looks like something I can wear around my neck! He runs his P4 at something along the lines of 4.5ghz on Air....

  2. #2
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    Posts
    8,356
    that is sweeeett, i wanna do that to me sandy
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  3. #3
    Member bohansen's Avatar
    Join Date
    Dec 2004
    Posts
    285
    wow, i'm amazed 4.5 on air

  4. #4
    Member SolidxSnake's Avatar
    Join Date
    Dec 2004
    Location
    Massachusetts, USA
    Posts
    5,849
    millimeter graph-paper shot. Now..

    For all I know, that could be polish.
    When I logon to Windows, I press Ctrl+Alt+ELITE
    i7-2600 4001MHz @ 39x102.6~ASRock P67 Fatal1ty Professional~MSI N580GTX Lightning 1536MB @ 1000//2400 @ 1.149v~8GB Corsair Vengeance DDR3-1600 9-9-9-24~256GB Samsung 830 SSD and 60GB OCZ Vertex~2x Western Digital Caviar Green 1TBs in RAID1 ~BFG ES-800 PSU
    Custom Watercooling Loop | Apogee GT, MCW82, MCP35x + Res, Thermochill PA120.2 and 120.3 (both rev1) w/ Gentle Typhoon AP-15s pull, 7/16"x5/8" MasterKleer, 100% Distilled Water with Iodine ---All encased in a Silverstone TJ07B-W
    Join in on the fun! Heatware OCForums Metal Club member #13224


  5. #5
    Member ziggo0's Avatar
    Join Date
    Apr 2004
    Location
    La Porte, Indiana
    Posts
    4,729
    Quote Originally Posted by SolidxSnake
    millimeter graph-paper shot. Now..

    For all I know, that could be polish.
    I'm not aware if its polish, but even if it was it looks damn fine.

    4.577ghz on Air (His attempt to beat my 1M PI time, failed <3 Jod)


  6. #6
    Registered
    Join Date
    Nov 2003
    Location
    Palatka, FL
    Posts
    62
    just curious. yes, this is a bit of a bewbie question, but how do you lubricate your sandpaper for that? is there a how-to?

    anyways, those perfectly lapped IHS have always impressed me. they really are great looking and you know that's gotta help out.

  7. #7
    Skulltrail Junkie Sneaky's Avatar
    Join Date
    Dec 2004
    Location
    Milwaukee, WI
    Posts
    3,758
    thoes 6x0's are f'in miracle overclockers... i swear to god


    i lapped the IHS on my 3.0E, but i'm sure as hell not letting sandpaper anywhere near my 660ES when i get it... it already does 4.5ghz on air w/ stock voltage and 5.2 on dry ice w/ stock voltage... oh man, when i pump up the voltage on that, i'm aiming to smoke nikhsub1's WC overclock record
    Lian Li PC-75B Corsair Professional Series AX850
    2x Intel Xeon E5420 @ 3.0GHz (400x7.5) Intel D5400XS Skulltrail
    8GB (4x2GB) A-Data DDR2-800 FB-DIMM ECC (1:1 @ 400MHz)
    MSI Radeon HD4870 1GB Creative X-Fi Titanium HD
    2x WD VelociRaptor 150GB (RAID 0) + 2x WD Caviar Black 500GB
    2x EK Supreme HF CPU EK S-MAX NB EK VGA Supreme GPU Blastflow Tidal SB
    Thermochill PA120.3 Swiftech MCRes-Micro Laing D5 w/ Bitspower Top

    -----------------------------------------------------------------
    Heatware http://www.heatware.com/eval.php?id=34593

  8. #8
    Member ziggo0's Avatar
    Join Date
    Apr 2004
    Location
    La Porte, Indiana
    Posts
    4,729
    Quote Originally Posted by vanillasky
    just curious. yes, this is a bit of a bewbie question, but how do you lubricate your sandpaper for that? is there a how-to?

    anyways, those perfectly lapped IHS have always impressed me. they really are great looking and you know that's gotta help out.
    Acording to what he told me, he used water as a lube.

  9. #9
    Member SolidxSnake's Avatar
    Join Date
    Dec 2004
    Location
    Massachusetts, USA
    Posts
    5,849
    Yeah, water should serve fine.

    Cathar uses kerosene, AFAIK.

    If you don't know who Cathar is, I feel you need to know.

    He is very 'famous'. I consider him a god in lapping
    When I logon to Windows, I press Ctrl+Alt+ELITE
    i7-2600 4001MHz @ 39x102.6~ASRock P67 Fatal1ty Professional~MSI N580GTX Lightning 1536MB @ 1000//2400 @ 1.149v~8GB Corsair Vengeance DDR3-1600 9-9-9-24~256GB Samsung 830 SSD and 60GB OCZ Vertex~2x Western Digital Caviar Green 1TBs in RAID1 ~BFG ES-800 PSU
    Custom Watercooling Loop | Apogee GT, MCW82, MCP35x + Res, Thermochill PA120.2 and 120.3 (both rev1) w/ Gentle Typhoon AP-15s pull, 7/16"x5/8" MasterKleer, 100% Distilled Water with Iodine ---All encased in a Silverstone TJ07B-W
    Join in on the fun! Heatware OCForums Metal Club member #13224


  10. #10
    Member Banthur's Avatar
    Join Date
    Jul 2005
    Location
    Orlando, FL, UCF
    Posts
    138
    damn that's a fancy processor. I think I'd be kind of afraid to lap something that expensive!

  11. #11
    Member gofra's Avatar
    Join Date
    Jun 2005
    Posts
    247
    No way mirror look is a grit paper work - believe me, I've done that many times. I usualy finnish with 2000 paper and it looks nowhere as clean as this. If you wanna achieve the mirror look effect you NEED to polish it as Solid has mentioned above.

    Anyway, great job on the lapping - sweet to see enthusiast like myself! :P

  12. #12
    Skulltrail Junkie Sneaky's Avatar
    Join Date
    Dec 2004
    Location
    Milwaukee, WI
    Posts
    3,758
    what lapping kit have you been using?? the 10 micron paper from www.easypckits.com will give you a mirror finish every time
    Lian Li PC-75B Corsair Professional Series AX850
    2x Intel Xeon E5420 @ 3.0GHz (400x7.5) Intel D5400XS Skulltrail
    8GB (4x2GB) A-Data DDR2-800 FB-DIMM ECC (1:1 @ 400MHz)
    MSI Radeon HD4870 1GB Creative X-Fi Titanium HD
    2x WD VelociRaptor 150GB (RAID 0) + 2x WD Caviar Black 500GB
    2x EK Supreme HF CPU EK S-MAX NB EK VGA Supreme GPU Blastflow Tidal SB
    Thermochill PA120.3 Swiftech MCRes-Micro Laing D5 w/ Bitspower Top

    -----------------------------------------------------------------
    Heatware http://www.heatware.com/eval.php?id=34593

  13. #13
    Member
    Join Date
    May 2005
    Posts
    194
    ever try to just take off the heatspeader... i think that'd work better :P

  14. #14
    The Mad Smelter Susquehannock's Avatar
    Join Date
    Aug 2003
    Location
    Maryland, USA
    Posts
    2,410
    Nice lapp job your budd did there ziggo0. Hope it performs well for you.

    Quote Originally Posted by gofra
    No way mirror look is a grit paper work - believe me, I've done that many times. I usualy finnish with 2000 paper and it looks nowhere as clean as this. If you wanna achieve the mirror look effect you NEED to polish it as Solid has mentioned above.

    Anyway, great job on the lapping - sweet to see enthusiast like myself! :P
    Sorry but you can get such a finish with grit paper. Have done it myself
    many MANY times.
    You can use Kerosene but that brings it's own problems. IMhO water is the
    best "lube" in this context.

    I'm going to have to check out Cathar's work SolidSnake. "Lapping God"?
    We should compare work/notes.
    Last edited by Susquehannock; 07-23-05 at 03:49 AM.

  15. #15
    Registered
    Join Date
    Nov 2003
    Location
    Palatka, FL
    Posts
    62
    yeah, i know who cathar is. look at my join date, hehe. i've been a lurker for quite some time. i don't have the guts to do something like that on my A64. i guess i'd do it in a heartbeat if i wanted to squeeze the last bit out of my cooling.

  16. #16
    Member
    Join Date
    Feb 2005
    Posts
    240
    Kerosene does keep the sand paper from curling, which is the biggest problem with water. It also evaporates cleaner than water.

    CJ
    DFI NF4 Ultra-D modded to SLI
    3700+ "Cabbage" San Diego
    Thermalright XP-120
    2x512MB Mushkin Blue PC3200 Original BH-5 :)
    MSI 6600GT
    Seagate 160GB SATA
    Seagate 200GB UATA
    Hitachi 250GB SATA II
    Antec P180 case and Enermax 495AX
    MS MCE2005

  17. #17
    Masta Tweeka! sunrunner20's Avatar
    Join Date
    Jan 2004
    Location
    Dallas, Texas
    Posts
    2,444
    Quote Originally Posted by s random
    ever try to just take off the heatspeader... i think that'd work better :P
    Can't do that w/ current P4s. Or at least thats my understanding. They do something where if you try to remove the IHS it kills the CPU. something about soldering the IHS to the core
    Desktop:
    Q6600 G0@3Ghz,eVGA 8800gts,P5k Premium,2x2gb Kingston,120gig Agility 3,Seasonic S12-600HT
    Laptop:
    Toshiba M7(Tablet): T2300, 4gb ram, 160gb seagate
    My Heatware

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •