Results 1 to 6 of 6
Thread: My DFI is here!
07-30-05, 12:03 AM #1
My DFI is here!
My Lanparty UT NF4 Ultra D came today! It's even more bad ass than I thought. My 3800+ should get here next week and then I can have fun.
One question though, what is the tool that's included with the mobo? It looks like some kind of extractor but I really have no idea.
07-30-05, 12:10 AM #2
- Join Date
- Jul 2005
- Whitman, MA .......its hell on earth
it used for those block's between the two pci-ex slots
its for the Xtreme Dual Graphics thing but i heard you can do something with them and the chipset to make the board SLI
07-30-05, 03:42 AM #3
It is a bios chip extractor, but you can use it to pull the Sli jumpers, move them all to the bottom to enable SLI, however the chipset will need to be modded first to SLi, Here is the Thread on modding the chipset and ofcourse you will need 2x Sli compatible cards and a SLi bridge is recommended but not required with the newest drivers( Although performance take a hit) without it.
Fx55Sandy@2950 for now
Dfi Lanparty Ultra> Sli
X800XlAll Air Cooled:(
07-31-05, 06:25 PM #4
07-31-05, 09:42 PM #5
Yup just be careful and only uncover the metal parts and you'll be fine you lucky ass *******. I GOT GREEN FREAKING EPOXY!!! How gay is that. haha. if you need help, the thread is in my sig. And another DFI NF4 Mod/TrickMacbook Pro »« Intel Core 2 Duo 2.4Ghz (Santa Rosa) »« 2x1GB 667Mhz DDR2
DFI SLI-D »« 3200+ Venice @ 2500MHz (250x10) »« 2x512 TwinMOS SP BH-5 »« Connect3D X800XL »« Seagate 400GB »« Fortron AX-500A »« Lian Li V1000
ASUS Z63A »« Intel 915GM 14.1" WXGA 1280x768 »« Pentium M 735 @ 2.23Ghz (Pin Modded @ 1.212V) »« 1x1GB OCZ DDR2 PC4200 »« WD 60GB 5400RPM
ABIT NF7 »« 2600+ Thoroughbred @ 2.2GHz »« 2x512 Kingston ECC »« BFG 6800NU OC 16x6 »« Maxtor 250GB 16MB Cache »« ISO 420W »« Chieftec Dragon
My Heatware F@H Team 32
08-02-05, 11:32 AM #6