Results 1 to 9 of 9
Thread: USB question
10-07-05, 11:40 AM #1
how do i know which usb port is which. i am trying to connect to my cell phone with kandy and i dont know which port the phone is pluged into
10-07-05, 11:53 AM #2
10-07-05, 12:04 PM #3
lsusb will show you what is connected to which port. If it can't find lsusb, you will have to apt-get the package that has it (sorry, not sure of the name). You may need to be root for lsusb to be pathed.
10-10-05, 12:25 PM #4
ok lsusb worked my jump drive is in bus 5 device 2. how do i save somthing to that now?
10-10-05, 12:33 PM #5
Mount it. It will be assigned a device number by the kernel (usually /dev/sd<number>, which you can see by reading through the output of dmesg.
10-10-05, 12:37 PM #6
ok found what dev it is. i type
mount /dev/scsi4 /media/bottomUSB
and i says must specify system volume type..... vfat?
10-10-05, 12:51 PM #7
when i click on devices it says "this protcol is not supported" why?
10-10-05, 12:57 PM #8
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: STORAGE DEVICE Rev: 1.25
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 0
SCSI device sdd: 512000 512-byte hdwr sectors (262 MB)
sdd: Write Protect is off
WARNING: USB Mass Storage data integrity not assured
10-10-05, 01:14 PM #9
Hell yea i got it
mount -t vfat /dev/sdd1 /media/bottomUSB/
it was being really picky about the backslashes