Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Oct 2002
    Location
    W. Lafayette, IN
    Posts
    526

    DFI Board Selection: Confused

    SO I'm looking to get a socket 939 DFI board to overclock an Opteron.

    I've been doing some research here and on DFI-Street.com. First AMD + First DFI board, but I've been OC for 10+ years.

    Anyway, I narrowed it down to a DFI Board, but which one:

    Everyone seems to buy the ULTRA-D found here:
    http://www.newegg.com/Product/Produc...82E16813136152

    And do the SLI/SATA 2 mod.

    But why does no one by the SLI-D
    http://www.newegg.com/Product/Produc...82E16813136158

    For 20 bucks more, might as well get the bridge, and skip the mod. Does the ULTRA-D include better OC features?

    Essentially, where can I find the difference between all of DFIs high end NF4 boards?

    I want a stable, good oc board, and a board that can do sli, as cheap as possible.

    Thanks
    Indyxc

    CPU: Intel C2D e6000 @ 3000 mhz
    Cooling: Stock for now
    Motherboard: Gigabyte DS3
    Ram: Patriot 2x1GB PC 6700
    Video: 1900 XTX


  2. #2
    R. Kelly is my roll model EvilCloudStrife's Avatar
    Join Date
    Feb 2003
    Location
    Mesa, Arizona
    Posts
    1,244
    nope the ultra-d is the same motherboard as the sli-d. you dont need to do the sata2 mod on the ultra-d, just the sli mod. when you do the sli mod the 2 boards are exactly the same. the bios is the same, the motherboard layout is the same. everything is the same. the fact of the matter is that the sli motherboard wasnt that cheap when everyone was buying a dfi ultra-d. for $20 more, heck.. just go for it if you want, if not get the ultra-d.. its all the same in the end
    Name: Apocalypse
    Motherboard: DFI NF4 Ultra-D Bios 623-3
    CPU: AMD 939 Opteron 148 CABYE 0536 & XP-120 W/ Sanyo Denki 120mm Fan - 11x264 - 2900Mhz - 1.52V - 25C Idle - 38C Load
    RAM: OCZ Gold Edition 2GB (2 x 1GB) - UCCC - 1:1 - 264Mhz - 3-4-3-8 - 2.68V
    Videocard: Evga 7800GT 256-P2-N518 (500/1200)
    DVD: NEC 16XDVD+/-RW
    Hard Drives: (1)Western Digital 7200 250GB 16MB SATA2, (2)Western Digital 7200 250GB 16MB SATA2, Western Digital 7200 200GB 8MB IDE, (1) Westen Digital 7200 250GB 2MB IDE, (2) Western Digital 7200 250GB 2MB IDE, (3) Removable Western Digital 7200 250GB 2MB USB2 Enclosure
    PSU: OCZ 520W SLI Powerstream

    Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoloy card, a 2 of clubs, 7 of spades and a green #4 card from the game UNO

  3. #3
    Member
    Join Date
    Oct 2002
    Location
    W. Lafayette, IN
    Posts
    526
    Ah, thank you sir!

    The confusing thing is, the Ultra-D by the name seems like it has more features than just the SLI-D.

    I just found this post by R-Gone litteraly 20 seconds after I posted this:

    "DFI LanParty NF4 SLI-DR Full meal deal with FrontX that works with the correct 'outputs' and LanParty transpo carry case and sleeving to match cabling of the mobo. "R" gives 4 additional Sata ports.

    DFI LanParty UT NF4 SLI-D No "R" so standard 4 sata ports and UT so the shipping package is not as complete for all the extras of NF4 SLI-DR. All actual motherboards are the same basic fab.

    DFI LanParty UT NF4 Ultra-D NO SLI and No extra 4 sata ports and of course none of the extra goodies in the full meal deal NF4 SLI-DR.

    RGone..."

    So if anyone else finds this in the future: All boards are essentially the same, minus the number of SATA ports, and the packaging content

    The benefit of going with the SLI-D over the Ultra-D is you don't have to do the mod, and it comes with the PCI-Express Bridge.

    CPU: Intel C2D e6000 @ 3000 mhz
    Cooling: Stock for now
    Motherboard: Gigabyte DS3
    Ram: Patriot 2x1GB PC 6700
    Video: 1900 XTX


  4. #4
    Member soundx98's Avatar
    Join Date
    Nov 2005
    Location
    Cantundastan
    Posts
    140
    But then again you are probably going to need to replace the TIM on the chipset cooler anyways, so you might as well kill two birds with one stone.
    Ultra-D at NewEgg for $113.00
    Good luck with the build
    Main:DFI LT LP P35 T2R, Intel Xeon E3110 @ 500 x 8.5, 2x1024 Mushkin 996563, 1xWD4000AAKS, 2X250G Hitachi, NEC-ND4551, XFX 8800GT Corsair HX-620W, Antec 900, Matrix Orbital MX6, XP32/W7 RC x64/W7 RC x86

  5. #5
    Member
    Join Date
    Oct 2002
    Location
    W. Lafayette, IN
    Posts
    526
    I ended up with the SLI-D.

    What do you mean by replacing the TIM anyway?

    CPU: Intel C2D e6000 @ 3000 mhz
    Cooling: Stock for now
    Motherboard: Gigabyte DS3
    Ram: Patriot 2x1GB PC 6700
    Video: 1900 XTX


  6. #6
    Member soundx98's Avatar
    Join Date
    Nov 2005
    Location
    Cantundastan
    Posts
    140
    Sorry - Thermal Interface Material - lil yellow thermal pad that it comes stock (stuck between chip and chipset HSF). You can lower the temps by using a high quality compound such as As5, Ceramique, or Shin-Etsu

    http://www.dfi-street.com/forum/showthread.php?t=23611

    http://www.angrygames.com/chipset_clean-1.htm

    hope this makes it clear.
    Main:DFI LT LP P35 T2R, Intel Xeon E3110 @ 500 x 8.5, 2x1024 Mushkin 996563, 1xWD4000AAKS, 2X250G Hitachi, NEC-ND4551, XFX 8800GT Corsair HX-620W, Antec 900, Matrix Orbital MX6, XP32/W7 RC x64/W7 RC x86

  7. #7
    Member
    Join Date
    Feb 2001
    Location
    Midwest
    Posts
    210
    I'm looking at both of these boards too, but I read that DFI put epoxy or something on chip so you can't bridge connections. Is this true? Also the SLI-D seems to have more RAID Configurations. Does the SLI-D also have the nVidia nTune? Doesn't mention in the links. The SLI-D only SATAI and SLI, while the Ultra-D is SATAII and no SLI. So either way you need to mod something. One isn't easy to Mod/bridge then the other would it? Are the RAID Configurations worth the extra money considering you gotta Mod the board one way or another to get both of them to have SATAII and SLI?
    Also what about the SLI Infinity? That board is cheaper than Both and has SLI and SATAII already and more RAID Configs then the Ultra-D. Sorry don't mean to HiJack you're post but I had questions also about these 3 boards.

  8. #8
    Member soundx98's Avatar
    Join Date
    Nov 2005
    Location
    Cantundastan
    Posts
    140
    Ultra-D and above are ALL SATA II. Ultra-D can be modded to SLI. yes, newer boards have some epoxy over the two contact points but still easy to mod.

    SLI-DR has 4 additional SATA ONE ports off the Sil 3114 controller. The NV RAID is much faster so many never use the SIl Image Controller. ALL Can use NVtune but it is not recommended on the DFIs as the bios gives you much bewtter control than Automatic settings that NTune uses. Really recommend you DO NOT use NTune with these boards as many have had issues using it.

    Infinity SLI is a good board but not everyone gets the high OCs they do with the LanParty series. A bios may fix some issues with the Infinity and temp readouts. Remember that whichever you chose, nothing is guaranteed about overclocking.

    As much as I like my Ultra-Ds, the associated components (PSU, RAM. and CPU) are going to determine the final overclock. Chipset mod to SLI is easy and like I said you'll probably want to go with a better TIM than supplied stock anyway. If you plan on overclocking IMO I'd stick with the LanParty's to be safe.

    The cost difference between the boards is minimal when looking at the price of the entire system but don't let a little work on the chipset scare you. The BigToe modded bioses seem to be a lot more compatible with different memory (and all the bioses you'll want to try are on Tmod's CD which makes flashing a no brainer).
    Main:DFI LT LP P35 T2R, Intel Xeon E3110 @ 500 x 8.5, 2x1024 Mushkin 996563, 1xWD4000AAKS, 2X250G Hitachi, NEC-ND4551, XFX 8800GT Corsair HX-620W, Antec 900, Matrix Orbital MX6, XP32/W7 RC x64/W7 RC x86

  9. #9
    Member gvblake22's Avatar
    Join Date
    Dec 2003
    Location
    Tempe Desert
    Posts
    2,705
    My SLI Infinity did 300mhz HTT just fine. Would probably do higher but never got around to testing it.
    || Intel E8400 @ 400x8 + Coolink U8-120 || MSI P35 Neo2-FR || 2x1GB SuperTalent DDR2 800 (4-4-3-8) || Asus HD 4850 + Accelero S1 & Turbo Module || Auzentech HDA Xplosion || 320GB Seagate Barracuda 7200.10 || 150GB Western Digital Raptor X || Corsair VX550 PSU ||
    Mod Projects:
    || My First Custom Modded Case || Custom HDD Cooling/Silencing || Custom 6800GT Cooling || Custom Modded CoolerMaster Cavalier 3 || Blue Flame PS2 Stand || "Secret of the Ooze" Case Project ||
    || Heatware ||
    Say Thank You!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •