Results 1 to 5 of 5

Thread: No Video

  1. #1
    Member
    Join Date
    Mar 2002
    Posts
    106

    No Video

    I had an old machine with a bad mobo, so I decided to buy a new mobo and rehab it. But I can't get any video. I have a Matsonic 9127C mobo, with a P 4 1.6 Northwood chip. I've tried 2 different v cards, 2 pieces of ram, 2 Hd's and even a different mobo. all to no avail.

    Could the CPU be bad. if so would it give any beep codes. I'm not getting any beeps. Could a problem with the power supply cause this? The v card fan turns, so it's getting power. Anything else I should be considering?

    Thamks

    Sherm

  2. #2
    Member AZNBoiOnFIYA's Avatar
    Join Date
    May 2004
    Location
    Tucson, AZ
    Posts
    1,207
    you mightve gotten a bad mobo. it could be a number of things, but im uncertain without anymore background. did you oc the cpu? did you make sure all the components are seated right when you switched out the mobo? usually this is the cause of not being able to boot up.
    3400+ Venice @2.75GHZ 1.55V Air
    1GB Teamgroup Xtreme BH5
    ECS KN1 Lite
    7600GT @ 600/800 Air
    Coolmax CTG-850 Quad Rail PSU :D

    Heat

  3. #3
    Member
    Join Date
    Mar 2002
    Posts
    106
    I've tried 2 of everything, including mobos, v cards, ram, hd's and made sure things were seated properly. Also tried it on cardboard. Couln't get any video.

    Sherm

  4. #4
    Member AZNBoiOnFIYA's Avatar
    Join Date
    May 2004
    Location
    Tucson, AZ
    Posts
    1,207
    then its probably a molex connector on your psu that malfunctioning. do you have another psu you can try?
    3400+ Venice @2.75GHZ 1.55V Air
    1GB Teamgroup Xtreme BH5
    ECS KN1 Lite
    7600GT @ 600/800 Air
    Coolmax CTG-850 Quad Rail PSU :D

    Heat

  5. #5
    Member
    Join Date
    Oct 2005
    Posts
    251
    Probobly bad motherboard. Get a replacement for yours.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •