- Joined
- Oct 18, 2002
- Location
- Los Angeles
I'm getting a fedco 2-333 heatercore, part number 399095 at autozone for 24bucks After tax.
Dimensions are: 9.5 inches long 7.375 inches wide, 2 inches deep.
7.375 inches is 187.32500mm WIDE
9.5 inches is 241.3 millimetersmm LONG
Possible Fan configurations:
Two 120MM fans shrouded
like this
Or:
a 180mm fan with two 60mm fans at the top (or bottom)
like this:
Or:
Two 120mm fans with 6 40mm fans at the side
like this:
NOTE: in the ACII above each square represents a fan, to give you the idea of the fan arrangements.
If you have any more fan arrangement suggestions please let me know! Otherwise please vote on which you think would give me the best performance. Thank you.
Dimensions are: 9.5 inches long 7.375 inches wide, 2 inches deep.
7.375 inches is 187.32500mm WIDE
9.5 inches is 241.3 millimetersmm LONG
Possible Fan configurations:
Two 120MM fans shrouded
like this
Code:
_______
| | | |
| |___| |
| | | |
| |___| |
The sides represent the area that's shrouded or the area the shroud covers.
Or:
a 180mm fan with two 60mm fans at the top (or bottom)
like this:
Code:
______
| |
| |
|_____|
| | |
|__|__|
Or:
Two 120mm fans with 6 40mm fans at the side
like this:
Code:
______
| |_|
| |_|
|___|_|
| |_|
| |_|
|___|_|
NOTE: in the ACII above each square represents a fan, to give you the idea of the fan arrangements.
If you have any more fan arrangement suggestions please let me know! Otherwise please vote on which you think would give me the best performance. Thank you.
Last edited: