- Joined
- Jun 17, 2004
- Location
- CA, USA
I just measured my Antec TruePower 550 with a DMM, so here are my measurements. I don't understand why my load 12+ would be higher than idle. 5v is pretty low too so I'm thinking of doing the mod listed here . What do you guys think about my numbers?
Idle
3.3 = 3.278 (-0.67%)
5 = 4.85 (-3%)
12 = 11.92 (-0.67%)
Load
3.3 = 3.251 (-1.48%)
5 = 4.62 (-4.4%)
12 = 11.94 (-0.5%)
Idle
3.3 = 3.278 (-0.67%)
5 = 4.85 (-3%)
12 = 11.92 (-0.67%)
Load
3.3 = 3.251 (-1.48%)
5 = 4.62 (-4.4%)
12 = 11.94 (-0.5%)