Results 1 to 12 of 12

Thread: Athlon@1.38Ghz

  1. #1
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104

    Athlon@1.38Ghz

    I have overclocked my Athlon 1Ghz to 1.38Ghz is that possible to get that chip higher if i put it to 1425 then it craches in windows.
    If i just up the Vcore?
    I had already raised the Vcore +0,075 its now 1.91v

  2. #2
    Senior TIFOSI Sonny's Avatar
    Join Date
    Aug 2001
    Location
    VARIANTE ASCARI
    Posts
    6,064
    How hot is it getting? I hope you have a really good HSF. Try & up the VCore a bit but seeing that you already at 1.91V I would be worried with the heat.
    MICHAEL SCHUMACHER '94, '95, '00, '01, '02, '03, '04 FORMULA 1 DRIVER'S WORLD CHAMPION SEVEN WORLD TITLES
    ASUS Maximus Formula Shi "R" Yan Special HR-05/IFX(2), HR-09 U TYPE 2, HR-09 S TYPE 2
    E8500 C0 @ 8X505MHz 1.416V 1:1 TRU120E Shi "R" Yan Special
    CM2X1024-8500CD5 70nm, Team Xtreem 2X2048
    G92 GTS 512MB @ 810 | 2010 | 1010 HR-03 GT
    XFi Titanium PCI-E
    T260HD
    G9, G15R2, G25
    ST3320620AS, ST3750330AS, ST31500341AS, LiteOn iHAS 424 Y
    620HX

  3. #3
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    Temp is good 41C idle and 50C load (running Sisoft Sandra Burn in about 100 times) and if i play Max Payne its 45C.
    I think its very good temp. I have one side of the case open (that helps)
    Can i burn the CPU with Vcore? my mobo has a voltage protection!

  4. #4
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    CPU

  5. #5
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    MMX

  6. #6
    Senior Member

    Wega!'s Avatar
    Join Date
    Jan 2001
    Location
    Denmark!
    Posts
    2,591
    What HS do you use? Do you use AS2?

    I think your temp is a little high. I run my T-Bird @1490MHz full load is 46C. That's 110MHz more than you and still 4C colder than you.
    You say Lady Gaga, I say Dash Berlin
    You say Hannah Montana, I say Orjan Nilsen
    You say Owl City, I say Above & Beyond
    You say Justin Bieber, I say Armin Van Buuren
    You say Taylor Swift, I say Dj TiŽsto

    In Trance we trust!

    Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
    Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.

  7. #7
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    What HS do you use? Do you use AS2?

    I think your temp is a little high. I run my T-Bird @1490MHz full load is 46C. That's 110MHz more than you and still 4C colder than you.


    You have a 1200 T-bird clocked to 1490 this means that your overclock is 290Mhz but mine is a 1000 T-bird running @1380
    its 380Mhz more than default. Mine has 90mhz more than yours.

    Thats why its hoter

  8. #8
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    I use a COOLERMASTER high performance thermal compound and an Coolermaster heatsink

  9. #9
    Senior Member

    Wega!'s Avatar
    Join Date
    Jan 2001
    Location
    Denmark!
    Posts
    2,591

    Question

    Coolermaster's aren't the best HS's so maybe you should look around for another. I you want something good, go for a ALPHA 8045, SK6 or a Swiftech MC462A.
    How about case cooling?
    Also what stepping does your CPU have?
    You say Lady Gaga, I say Dash Berlin
    You say Hannah Montana, I say Orjan Nilsen
    You say Owl City, I say Above & Beyond
    You say Justin Bieber, I say Armin Van Buuren
    You say Taylor Swift, I say Dj TiŽsto

    In Trance we trust!

    Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
    Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.

  10. #10
    Member keio's Avatar
    Join Date
    Sep 2001
    Location
    Estonia
    Posts
    104
    steping is AXIA

  11. #11
    Senior Member oc jason's Avatar
    Join Date
    Feb 2001
    Location
    Fayetteville, AR
    Posts
    2,195
    I think maybe your vcore is off, most boards dont allow over 1.85vcore at most without a voltmod. at +.775 im at 1.825 up from 1.750. Make sure you have a GOOD hs, as that will generate lots of heat. But usually upping the vcore will allow a little more stability-maybe try lower X and higher FSB, or maybe less agressive mem timings
    [THE HATEMACHINE]
    .: p4 3.2c : Abit IC7 : 1.5gb pc3500 : Gf Fx 5950 :.

    [FAVORITE GIRL]
    .: AMDxp 3700 : DFI LANPARTY UT nF4 Ultra-D Socket 939 : 2gb pc4000 : Gf 7900gt :.

    WoW
    Server: Laughing Skull
    Faction: Alliance
    Name: Truex 60 Dwarf Rogue

  12. #12
    Senior TIFOSI Sonny's Avatar
    Join Date
    Aug 2001
    Location
    VARIANTE ASCARI
    Posts
    6,064
    Originally posted by [OC] Jason
    I think maybe your vcore is off, most boards dont allow over 1.85vcore at most without a voltmod. at +.775 im at 1.825 up from 1.750. Make sure you have a GOOD hs, as that will generate lots of heat. But usually upping the vcore will allow a little more stability-maybe try lower X and higher FSB, or maybe less agressive mem timings
    Some MoBos add a little bit for increased stability. This is also why some boards are not AMD recomended. The BIOS reports the same voltage reading on my VCore compared to VIAhm.
    MICHAEL SCHUMACHER '94, '95, '00, '01, '02, '03, '04 FORMULA 1 DRIVER'S WORLD CHAMPION SEVEN WORLD TITLES
    ASUS Maximus Formula Shi "R" Yan Special HR-05/IFX(2), HR-09 U TYPE 2, HR-09 S TYPE 2
    E8500 C0 @ 8X505MHz 1.416V 1:1 TRU120E Shi "R" Yan Special
    CM2X1024-8500CD5 70nm, Team Xtreem 2X2048
    G92 GTS 512MB @ 810 | 2010 | 1010 HR-03 GT
    XFi Titanium PCI-E
    T260HD
    G9, G15R2, G25
    ST3320620AS, ST3750330AS, ST31500341AS, LiteOn iHAS 424 Y
    620HX

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •