Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Some MoBos add a little bit for increased stability. This is also why some boards are not AMD recomended. The BIOS reports the same voltage reading on my VCore compared to VIAhm.[OC] Jason said:I think maybe your vcore is off, most boards dont allow over 1.85vcore at most without a voltmod. at +.775 im at 1.825 up from 1.750. Make sure you have a GOOD hs, as that will generate lots of heat. But usually upping the vcore will allow a little more stability-maybe try lower X and higher FSB, or maybe less agressive mem timings