Results 1 to 4 of 4
Thread: Can it be the NorthBridge?
07-21-06, 01:34 AM #1
Can it be the NorthBridge?
I have a P4P800-E dlx, I recently got a GeForce 6800GS for it. Prior to putting in the 6800gs I had a system overclock of 250fsb, it was Prime95 stable, Memtest86+ stable, and OCCT stable. When I installed the new video card, I had problems with the 6800gs like stuttering, freeze for a few seconds, stuff like that. So, I lowered my FSB to 240, and now it works great.
My question is can having a high system overclock plus an overclocked video card, just be too much for the northbridge on this board to handle?
07-21-06, 05:43 AM #2
I have a 7800GS on my p4p800 deluxe, didn't affect my overclocking
at all. Previously had a 9800xt and before that a Ti4200, all overclocked,
Try upping the Vagp in bios to 1.6v, may or may not make any difference.
The cpu I was using was a p4 email@example.com, now it has a Dothan
1.5@2430mhz and Asus ct-479 adaptor.
Another thing to consider is that the 6800gs may run significantly hotter
than whatever You had in there before, more heat, less speed, especially
If your running a prescott.
07-21-06, 12:39 PM #3Originally Posted by imperiousleader
07-31-06, 05:50 PM #4
I got it, it was my 2x256 ram chips. I guess I have to live with only 1Gb of ram. Was the problem because I had all 4 ram slots filled or because there were 2 different sizes of ram.