Page 1 of 2 1 2 LastLast
Results 1 to 20 of 24
  1. #1
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile

    Surfrat's e6400 on P5W DH

    Ok got everyhting up and running.

    Asus P5W-DH
    E6400
    HIS X1900XT

    I am currently at 400FSB and temps are 29c idol. I am tryin to figure out how to get a score in PCMark05. It runs all the tests and then says to "System Suite must be selected and run to obtain a PCMark score". Any ideas?

    Super PI is 18seconds.

    Screenshots to come.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  2. #2
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Just an update, I found the fixed .dll file for pcmark and it is running perfectly now. Will post score when done as well as screen shots.

    Vcore is 1.35
    Vdimm is Auto
    Hyperpath3 is Disabled
    Temp during PCmark05 = 32c

    All other Bios settings are stock at this point.
    Last edited by TechtonicPC; 08-15-06 at 09:00 PM.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  3. #3
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    I would like to mention one quirk I am having with my setup. This happens at stock settings also.

    When rebooting, I sometimes get like a messed up display and it will hang, and cause me to reboot again. It also is sometimes showing no video at all, and staying a blank screen until windows starts. Then everyhting is fine. If I completely power off, and then restart, I avoid these two problems. Anyone experience anyhting like this before?

    Another question I have is are your guys leaving your PCI-E settings on auto, or setting them to 100/33.3?
    Last edited by TechtonicPC; 08-15-06 at 09:18 PM.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  4. #4
    $30 a phone d94's Avatar
    Join Date
    Sep 2004
    Location
    48302
    ill be watching this thread
    Antec 300 Intel Q6600 @ 3.7 - X48-DS4 - 4gb ddr2 - 500w Earthwatt's - 52" Sharp Aquos LC-52D64U
    1x 640GB WD - 2x 1TB Greenpower - 2x 400GB Seagate - ATI 4830 512mb @ 680/975
    3DMark Vanage 7402 3DMark05 20,447 3DMark06 13,693

    Emachines amd x2 5000+ @ 2.9ghz w/foxconn bios - 2gb ddr2
    stock POS 300w - 400gb Seagate - diNovo + VX Revolution

    MacBook Air - 1.6ghz c2d - 2gb ddr2 - 80gb

    heatware

  5. #5
    traldan's Avatar
    Join Date
    Feb 2005
    Location
    Folding in Maryland!!
    Not bad at all, I'll be interested in seeing how far you get.
    .:Bliss:.
    .:Q6600 G0 3.0Ghz - Ultra 120 Extreme/Ultrakaze 120mm (130CFM!) - possibly dead?
    .:Gigabyte GA-P35-DS3R
    .:4GB (2x2) G.Skill DDR2-1000
    .:Sapphire X1900XT
    .:Sparkle FSP550PLG-SLI
    .:160GB Hitachi Deathstar, 500GB Maxtor
    .:Hyundai L90D+

    Folding 24/7 for TEAM 32

  6. #6
    Member hyperasus's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Nice to see you up and running surfrat. Yes set pci-e to 100/33. Did you turn up the NB voltage?
    Motherboard: ASUS Maximus IV Gene-Z/GEN3 Z68
    CPU: Intel i7-2700K
    Memory: 16GB Crucial Ballistix 1600 (2 x 8GB) 8-8-8-24
    Hard Drives: Intel 520 240GB + 4TB Seagate 7200rpm
    Video Card: Integrated Intel
    Power supply: Antec EarthWatts Platinum 450watt

    Heatware

  7. #7
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Oh anyone know a fix for the damn sata drive not recognizing sometimes on reboots? Its aggravating..

    I had the exact same problem with my Asus P5WD2-Premium.
    Last edited by TechtonicPC; 08-15-06 at 09:43 PM.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  8. #8
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Quote Originally Posted by hyperasus
    Nice to see you up and running surfrat. Yes set pci-e to 100/33. Did you turn up the NB voltage?
    Yea I hadn't raised the MCH voltage yet, but the computer froze running test 10 on pcmark05. So I just raised MCH to 1.55 and am trying again.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  9. #9
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Ok the MCH to 1.55 did the trick.

    PCMark05 = 8047

    Screenshots coming now I promise
    Last edited by TechtonicPC; 08-15-06 at 10:34 PM.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  10. #10
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    CPU-Z & Temps



    SPI



    PCMark05

    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  11. #11
    Senior Intel-lectual
    Join Date
    May 2002
    Author Profile
    What fixed dll file surf? That might explain some things for me

  12. #12
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Aquamark Score

    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  13. #13
    Member RangerXLT8's Avatar
    Join Date
    Oct 2004
    Location
    Asheville NC
    Subscribed.
    Core 2 Xeon 3210 Quad Core 2.4GHz
    Gigabyte EP-35C-DS3R
    Patriot Viper DDR3 4GB 6-6-6-20
    ATI HD4870 512MB
    OCZ Vertex 2 120GB
    2x150GB Raptors
    1x320GB Western Digital HDD
    LiteOn DVDRW
    Heatware 44-0-0

  14. #14
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Quote Originally Posted by Ross
    What fixed dll file surf? That might explain some things for me
    its a small dll file called: direcpll.dll

    It goes in your /windows/system32/Futuremark/MSC folder.

    Ill be happy to email it or send it via im. I can't for the life of me remember where i orignally downloaded it hehehe.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  15. #15
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    3DMark05




    Now keep in mind I have not touched the video card yet. So i expect some of these video related scores to go up when I get time to mess with that.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  16. #16
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Ok last post for the night. I am priming now and will elt it run over night. So far 20 minutes ina nd no issues. Using Orthos by the way. If it can do 12hrs duel prime then ill push it some more tomorrow!

    So far I am extremely pleased with the results.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  17. #17
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Ok seems to be completely stable. 8 plus hours prime stable.

    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  18. #18
    Member RangerXLT8's Avatar
    Join Date
    Oct 2004
    Location
    Asheville NC
    Quote Originally Posted by Surfrat
    Ok seems to be completely stable. 8 plus hours prime stable.

    ahh 3.2GHz is a good feeling. That is exactly where I run mine. What voltage in bios are you running.

    Mine took 1.385 bios to get stable.
    Core 2 Xeon 3210 Quad Core 2.4GHz
    Gigabyte EP-35C-DS3R
    Patriot Viper DDR3 4GB 6-6-6-20
    ATI HD4870 512MB
    OCZ Vertex 2 120GB
    2x150GB Raptors
    1x320GB Western Digital HDD
    LiteOn DVDRW
    Heatware 44-0-0

  19. #19
    Member, formerly Surfrat TechtonicPC's Avatar
    Join Date
    Nov 2004
    Location
    Florida
    Author Profile
    Quote Originally Posted by RangerXLT8
    ahh 3.2GHz is a good feeling. That is exactly where I run mine. What voltage in bios are you running.

    Mine took 1.385 bios to get stable.
    I am at 1.375. With 32c idol temps and during prime it got to 39c. These conroes are damn awesome on heat.

    On a side note PCMark05 ran and completed at 1.35, but when I think it was borederline cause when I bumped up to 1.375 it increased my score by 100. So this seems to be the sweet spot.
    COOLING: Lamptron Touch, XSPC RX360, Swiftech MCP655, Lund Reservoir, Koolance 370

    http://valid.canardpc.com/cache/banner/85tlfw-4.png

  20. #20
    RAM Junkie NinjaZX6R's Avatar
    Join Date
    Nov 2002
    Location
    In slots 2 & 4!
    Looks like yours is pretty similar to mine. I have a 7900GT so I think your 3dmark will beat me, but my aqua is a little higher. Here are a few of mine...





    -Collin-
    Gaming Rig: Core i7 920|Gigabyte GA-EX58-Extreme|OCZ PC3-12800 Platinum D9JNL (3x1gb)|Visiontek HD 4870|PC Power & Cooling 1kw-SR
    Testing Rig: E1600 Celery|Asus Blitz Extreme|Crucial Ballistix PC3-12800 D9GTR (2x1gb)|BFG OC 8800GTS|Antec Server 550 Watt


    Me: Dude! I can't post anything because of the NDA on my CPU!!!
    Glock: What NDA...you mean that piece of paper that got used as a napkin and thrown away?


    My Heat

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •