Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
I'm with Ross on this one, I wouldn't give an ES over 1.7vcore unless it kept scaling. Now get to it and dice that thing Ross, I want to see some results.Ross said:XOCer, no thanks...this is a good one and I don't want to take that kind of chance Well, that and there's no way my phase unit will hold temps on it at that high of Vc
WaTTz said:GOD I NEED TO GET SOME INSULATION !!!
I want to be in the 4ghz club so bad ...
**kicks phase unit under the desk**
nd4spdbh2 said:rrr i am pretty close to joining this club.... curently 3.780ghz @ 1.45v but it seems like i hit a wall after that.
greenmaji said:420FSB is around the FSB wall of a stock P5W-DH, 444FSB+ might take some cooling modification for the NB and fets or getting a diffent motherboard (the 64 WS-Proffesional's stock FSB would get you over the hump if you really want to stick to 975X)
Good luck
Dragon Heart said:OMG golden batch !! [email protected] 1.57vcore bios P5W DH@445 fsb
CPU: E6600 retail batch L628
Motherboard: ASUS P5W DH Deluxe bios 1101
Memory: 2GB Gskill 6400 HZ micron D9 ( serial 0606xxxx)
PowerSupply: Enermax liberty 620w
Cooling: ALL AIR COOLING ( thermalright ultra 120 )
Vcore: 1.57 in bios
greenmaji said:@Dragon Heart...I said the "normal" FSB wall of a stock DH was around 420.. JC got his to 450 or a little better w/cooling mods IIRC
I don't recall seeing a week 28 chip just yet, and that Vcore is about .8-.9 lower then I would expect for 4Ghz, thats quite nice Were did you get the Vcore reading?
Dragon Heart said:OMG golden batch !! [email protected] 1.57vcore bios P5W DH@445 fsb
CPU: E6600 retail batch L628
Motherboard: ASUS P5W DH Deluxe bios 1101
Memory: 2GB Gskill 6400 HZ micron D9 ( serial 0606xxxx)
PowerSupply: Enermax liberty 620w
Cooling: ALL AIR COOLING ( thermalright ultra 120 )
Vcore: 1.57 in bios
Valid 4.00 ghz !!!!!!!!!!!!!!!!!!!!!!!!!
didn't hope my P5w DH reach such fsb
NO MOD ALL AIR COOLING
Regards