Page 11 of 13 FirstFirst ... 10 11 12 ... LastLast
Results 201 to 220 of 253
  1. #201
    Senior Solid State Aficionado dominick32's Avatar
    Join Date
    Dec 2005
    Location
    New York
    Ok so the latest version of Rivatuner is compatible with the gtx?
    Sweet. Let me go DL it. What are some max clocks on air before I start shooting too high.
    Next Level Hardware
    Solid State Drive Technology Discussion Thread
    ...3770k@4.5 GHz...Noctua Dh14...Asus z77 dlx...Samsung 840 Pro 256 GB... ARES 8Gb 2x4....
    crossfire 2 x diamond 6970's at stock clocks...4TB x2 in raid 1...corsair hx1050 psu...

    Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light.
    Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice.

    This should help. :) Circa 2010

  2. #202
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    poop I meant to type if it works lol, sorry.

    I would try coolbits first and see what happens, I always like riva for NV, also people are using ATITOOL
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  3. #203
    Senior Solid State Aficionado dominick32's Avatar
    Join Date
    Dec 2005
    Location
    New York
    Completely stock 8800GTX, stock clocks. IT ABSOLUTELY TRAMPLES MY OLD X1900XT by almost a 100% gain in performance:

    Next Level Hardware
    Solid State Drive Technology Discussion Thread
    ...3770k@4.5 GHz...Noctua Dh14...Asus z77 dlx...Samsung 840 Pro 256 GB... ARES 8Gb 2x4....
    crossfire 2 x diamond 6970's at stock clocks...4TB x2 in raid 1...corsair hx1050 psu...

    Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light.
    Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice.

    This should help. :) Circa 2010

  4. #204
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    nice I cant wait for mine.

    is it loud? do you have fan control?
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  5. #205
    Senior Solid State Aficionado dominick32's Avatar
    Join Date
    Dec 2005
    Location
    New York
    Quote Originally Posted by Rattle
    nice I cant wait for mine.

    is it loud? do you have fan control?
    Rattle. ITS NOT EVEN AUDIBLE BRO!
    Remember that old X1900XT fire siren when you turn the rig on? Let me repeat myself: you absolutely cannot hear any noise from the GTX.

    I havent been able to find any fan control yet, nor have I tried any oc programs. Give me some time. Its only been in the rig 20 minutes. hehe
    Next Level Hardware
    Solid State Drive Technology Discussion Thread
    ...3770k@4.5 GHz...Noctua Dh14...Asus z77 dlx...Samsung 840 Pro 256 GB... ARES 8Gb 2x4....
    crossfire 2 x diamond 6970's at stock clocks...4TB x2 in raid 1...corsair hx1050 psu...

    Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light.
    Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice.

    This should help. :) Circa 2010

  6. #206
    Member crfracer290's Avatar
    Join Date
    Jul 2006
    Location
    Htown,Texas
    Hey dom what is the CPU clock on the 06?

  7. #207
    Senior Solid State Aficionado dominick32's Avatar
    Join Date
    Dec 2005
    Location
    New York
    Quote Originally Posted by crfracer290
    Hey dom what is the CPU clock on the 06?
    my 24/7 cpu clock has been 4.2 Ghz since I got the Vapo back!!
    But the 8800 clocks are stock.
    Next Level Hardware
    Solid State Drive Technology Discussion Thread
    ...3770k@4.5 GHz...Noctua Dh14...Asus z77 dlx...Samsung 840 Pro 256 GB... ARES 8Gb 2x4....
    crossfire 2 x diamond 6970's at stock clocks...4TB x2 in raid 1...corsair hx1050 psu...

    Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light.
    Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice.

    This should help. :) Circa 2010

  8. #208
    Senior Solid State Aficionado dominick32's Avatar
    Join Date
    Dec 2005
    Location
    New York
    Hey Rattle,
    Remember that ATI X1900XT stutter that we both used to have when playing Fear? It was definitely ATI drivers because the stutter is completely gone. I am playing FEAR on Maximum Ultra Settings with 16X 4X filtering and the game averages 156 FPS....

    I have never played such a beautiful quality imaged game at such a smooth FPS. This is crazy!!!
    Next Level Hardware
    Solid State Drive Technology Discussion Thread
    ...3770k@4.5 GHz...Noctua Dh14...Asus z77 dlx...Samsung 840 Pro 256 GB... ARES 8Gb 2x4....
    crossfire 2 x diamond 6970's at stock clocks...4TB x2 in raid 1...corsair hx1050 psu...

    Dominick32 states "Bow down to your SSD god dominick32 and kiss my feet which are actually made of pure light.
    Jason4207 Responds: "Upon closer inspection to go in for that foot kiss I'm noticing that the 'light' isn't doing you any justice.

    This should help. :) Circa 2010

  9. #209
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    yeah man I killed CAT AI and it solved it for me, I cannot wait to play fear at 1680x1050 with everything max on this card. I am living thru you right now lmao
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  10. #210
    Magical Leopluridon Senior MadMan007's Avatar
    10 Year Badge
    Join Date
    Nov 2001
    Location
    in a magical field
    Heatware Profile
    Dom do some CPU speed scaling with 3DMark and other programs if possible pleeeease. I want to see if these things are CPU limited. That would be crazy if they are lol.
    There are three sides to any argument - side A, side B, and the Truth

    "This had better be frikkin' important. Is the meadow on fire?"

  11. #211
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    of course they are your not even gonna push this card 75% unless you got a 3.4 conroe or higher
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  12. #212
    Senior Radeon Mod God ViperJohn's Avatar
    Join Date
    Jul 2004
    Location
    Santa Ana, Ca
    Quote Originally Posted by MadMan007
    Dom do some CPU speed scaling with 3DMark and other programs if possible pleeeease. I want to see if these things are CPU limited. That would be crazy if they are lol.

    The 8800's can definately be CPU bottlenecked. When you are comparing card scores, especially 3DM06, make sure the cards were tested in the same system. Just changing to a Conroe from an AMD will jack up the 3DM06 score for any card.

    Viper
    .
    GXT260/280's to 783 x 1620 / 1296 ViperFang-VII Water Cooled
    .
    8800GTS 512Mb to 885 x 2106 / 1224 ViperFang-VI Water Cooled
    .
    8800 Ultra to 756x1944/1269 ViperFang-IV Water Cooled
    .
    2900XT to 992/1197 ViperFang-IV Water Cooled
    .
    8800GTX to 756x1784/1161 ViperVenom TEC Cooled
    .
    Pictures at www.imageevent.com/marginjohn/viperjohn

  13. #213
    Member Jod's Avatar
    Join Date
    May 2005
    Location
    Tempe, AZ
    Confirm Dom's fan speed. I'm a b1tch when it comes to loud stuff...hated my x19's stock. If left on auto, it's below threshold of a Scythe SFLEX E 21db 120mm. Cranked up to 100% kills idle temps by 10c, makes noise, but it's "whoooosh" not "raaaaaAAAAAAAAAAAAAAAA". Not altogether unpleasant either. I'd have no problems with that level while in game.

    As for image quality, BF2142's fences look much smoother. Hardocp's got a sample pic here, but the difference in game's quite pleasing. The X19 had a tendency to "wave" while running by one. Now it's even more distracting because it doesn't! And then I get shot for looking at the fence. There's also far less texture breakup, but that could be due to 16q CSAA.

    Played a little GTR2 and also got smoked as the road's never been so smooth and clearly drawn in front of me. I find myself slowing down in the middle of a race just to ogle, hehe.
    Heatware: Jodiuh

  14. #214
    Member crfracer290's Avatar
    Join Date
    Jul 2006
    Location
    Htown,Texas
    Jod, so the textures and jaggies dont seem to move as you run by them? that was one thing that annoyed me in BF2142 with my 1900xtx

  15. #215
    Member Fr3@k3r's Avatar
    Join Date
    Jul 2005
    Location
    (Lat 47 8' 22.1316")(Long -122 29' 52.9152") (Lakewood Wa)
    got my 8800GTS in with stock clocks...

    kinda makes me sad... i think something is borked...

    [Game Rig] AMD FX6300 Asrock 970 Extreme4 16GB Ripjaw PC314900 HD7850 Seasonic 850w Windows 8.1
    [Dads] Intel Celeron 530 - Biostar H61MGC - 4GB TeamWin DDR3 - PowerColor R7 260X - 160GB - FSP Bluestorm 500w - Win 8.1
    [Unused System] Intel 6500 - Gigabyte GA-G41M-ES2L - 4GB DDR2 3x3TB, 6x1TB , 1x2TB - Antec Earthwatt 650w - W7+FlexRaid
    (HEATWARE)

  16. #216
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    nah man that stock 165 is bottlenecking the snot out of it, I bet you OC it to 2.8 and you'll see 9k
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  17. #217
    Member Xtreme Barton's Avatar
    Join Date
    Jan 2004
    Location
    Omaha,NE
    Quote Originally Posted by Rattle
    ati's card is always better than NV's becuase they get to see what its like before they release there's. NV always wants to go first though.
    remember that okd saying though ???


    if your not the leader ... the view never changes !!


  18. #218
    Member Rattle's Avatar
    Join Date
    May 2005
    Location
    Home... again
    thats right
    Z87-GD65 | 4770k | H100 | 16gb Sammy 30nm 1866 | GTX780 SC | Xonar Essence Stx | BIC DV62si | ATH AD700 | 550d | AX850 | VG24QE | 840pro 256gb | 5tb | CherryReds | m60 | Func1030 |

    HEAT

  19. #219
    Member Fr3@k3r's Avatar
    Join Date
    Jul 2005
    Location
    (Lat 47 8' 22.1316")(Long -122 29' 52.9152") (Lakewood Wa)
    Quote Originally Posted by Rattle
    nah man that stock 165 is bottlenecking the snot out of it, I bet you OC it to 2.8 and you'll see 9k
    dont have the time or the will the overclock right now lol stock speeds are fine for me until i decide to test overclocking again.


    btw my 3DMark03 with my opty at 2gbrhz



    3dmark05 @ 2.2ghz

    Last edited by Fr3@k3r; 11-11-06 at 01:45 PM.
    [Game Rig] AMD FX6300 Asrock 970 Extreme4 16GB Ripjaw PC314900 HD7850 Seasonic 850w Windows 8.1
    [Dads] Intel Celeron 530 - Biostar H61MGC - 4GB TeamWin DDR3 - PowerColor R7 260X - 160GB - FSP Bluestorm 500w - Win 8.1
    [Unused System] Intel 6500 - Gigabyte GA-G41M-ES2L - 4GB DDR2 3x3TB, 6x1TB , 1x2TB - Antec Earthwatt 650w - W7+FlexRaid
    (HEATWARE)

  20. #220
    Member
    Join Date
    Feb 2005
    Location
    Boston, MA
    Heatware Profile
    Quote Originally Posted by dominick32
    Completely stock 8800GTX, stock clocks. IT ABSOLUTELY TRAMPLES MY OLD X1900XT by almost a 100% gain in performance:

    dom,

    at what clock speed did you get that 3dm06 run with? I am curious, because I got 11,546 with my x6800 @ 3.65GHz. Also stock clocks on the video card.
    ___________________________________________
    2560x1600

Page 11 of 13 FirstFirst ... 10 11 12 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •