trodas
Disabled
- Joined
- Jun 3, 2004
- Location
- Czech republic
Aaaaw! Delta, oh, no... I managed to own only one Delta fan (medium low speed 120mm one) at all (besided owning over 10 PCs) and they seems sturdy, well made and rotating as considerable speed. I won't dare to stick my finger to it on and I always took great care not to... I'm affraid that I got too skiny and fragile finders that this ******* migh easily chop me one off
I think you are lucky that you did not have more serious injury. It sure must hurt badly...
And table is like to survive worser things w/o too much damage, so fan was on the weaker side, obviously.
Anyway, back to topic (not to scare people from fans, yet I believe that these about 4000+ RPM Deltas should be considered dangerous w/o fan grills) about the grills. Yep, you can "rise" the grills, but if you want to just screw them to the top of case exhaust, then you face problems with these not straight ones. First, you need grommets. Second, it looks ughly from the outside to see the grill being "bellow in" the case. Adding fan pose another problem then, too. Since you getting now like 5mm bellow where you want to be...
That is why I looking just for the straight ones. I caniballized four nice gold ones from there Enermax 431W and one Enermax 650W PSUs, but still has to install two exhausts with silver ones and placed whole on top, including the four holders... Compared to the straight ones where their holders are hidden in the case they look drop-dead-ughly.
Sure they has their place on fans, but for exhaust holes are useless... Where to get the straight ones?
I think you are lucky that you did not have more serious injury. It sure must hurt badly...
And table is like to survive worser things w/o too much damage, so fan was on the weaker side, obviously.
Anyway, back to topic (not to scare people from fans, yet I believe that these about 4000+ RPM Deltas should be considered dangerous w/o fan grills) about the grills. Yep, you can "rise" the grills, but if you want to just screw them to the top of case exhaust, then you face problems with these not straight ones. First, you need grommets. Second, it looks ughly from the outside to see the grill being "bellow in" the case. Adding fan pose another problem then, too. Since you getting now like 5mm bellow where you want to be...
That is why I looking just for the straight ones. I caniballized four nice gold ones from there Enermax 431W and one Enermax 650W PSUs, but still has to install two exhausts with silver ones and placed whole on top, including the four holders... Compared to the straight ones where their holders are hidden in the case they look drop-dead-ughly.
Sure they has their place on fans, but for exhaust holes are useless... Where to get the straight ones?