Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Feb 2005
    Location
    NJ
    Posts
    44

    Swiftech waterblock mod question

    I have a swiftech waterblock cooling my Athlon 64 chip. I'm not sure what the model number of the block is, I can't find the receipt from when I bought it. It was a pretty popular one a few years back, hopefully some of you guys will recognize it in the attached picture. I was wondering if anyone has tried making a top plate so that this block will fit a socket 775 motherboard? Any comments would be appreciated. Trying to keep the cost down on a new rig.
    Attached Images Attached Images  

  2. #2
    Member jopapa1267's Avatar
    Join Date
    Sep 2004
    Posts
    209
    It looks like a MCW6002. It could be a 6000 though. depending on your tubing. It should fit if u still have your other brackets. the pent 4 brackets r 775

  3. #3
    Registered
    Join Date
    Feb 2005
    Location
    NJ
    Posts
    44
    Quote Originally Posted by jopapa1267
    It looks like a MCW6002. It could be a 6000 though. depending on your tubing. It should fit if u still have your other brackets. the pent 4 brackets r 775

    Thanks for the link jopapa. I only have the socket 939 bracket, maybe I can buy the 775 bracket by itself.

  4. #4
    Member jopapa1267's Avatar
    Join Date
    Sep 2004
    Posts
    209
    http://www.swiftnets.com/

    You can try contacting swiftech directly.

    If you have the MCW6000 they have brackets all the way at the bottom...so you can buy it from them directly.
    http://www.swiftnets.com/store/category.asp?CatID=2

    What tubing do you use? if its 1/2" then its a 6002 i BELIEVE. I'm not sure, can someone verify this?

  5. #5
    Registered
    Join Date
    Feb 2005
    Location
    NJ
    Posts
    44
    Quote Originally Posted by jopapa1267
    http://www.swiftnets.com/

    You can try contacting swiftech directly.

    If you have the MCW6000 they have brackets all the way at the bottom...so you can buy it from them directly.
    http://www.swiftnets.com/store/category.asp?CatID=2

    What tubing do you use? if its 1/2" then its a 6002 i BELIEVE. I'm not sure, can someone verify this?
    I have the mcw6002, this block is for 1/2" tubing. I ordered the 775 hold down kit directly from Swiftech. Thanks again for pointing me in the right direction.

  6. #6
    Member Froggy's Avatar
    Join Date
    Sep 2003
    Location
    Ca
    Posts
    844
    The 6000 us for 3/8" and the 6002 is for 1/2".
    Travis

    Haswell, Hawaii, & MLC

    My HeatWare 74-0-0

  7. #7
    Member
    Join Date
    Apr 2005
    Location
    Charlestown, IN
    Posts
    359
    Very good blocks. I sold mine to RyderOCZ, but kinda wish I'd kept it.
    FoxConn P45A-S
    Q9550/Xigma 1283S
    8GB GSkill DDR2 1000
    PowerColor HD4870PCS+
    BFG EX 1000
    CoolerMaster C590

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •