• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

E4300 quick reference thread.

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Evilsizer

Evilsizer

Senior Forum Spammer
​
Joined
Jun 6, 2002
would like those that have them to post as follows

Retail or OEM
sspec
plant it is from
batch code

coretemp VID of the cpu

max oc reached on stock-v.
max oc of the cpu
mobo used and voltages for cpu/mch/ichio.
Cooling


thanks!
 
Last edited:
OK, I'll be first...

Retail
SSPEC - Unknown
Plant - Malasia
Batch Code - Q641A278

VID - 1.3250v

Max overclock on stock voltage - 3.0 ghz (334*9)

Max OC of CPU - 3.3ghz (367*9)

Motherboard - ASUS P5B w/ 0806 BIOS

Cooling - Thermalright Ultra 90 w/ Panaflo 92mm Medium Output fan

Voltages

CPU - 1.50 (Set in BIOS) / 1.46 actual
FSB Termination Voltage - 1.30
Memory - 1.9


Will update MAX OC as I find my ceiling.

--------------------------------------------------------

Incremental OC settings all Orthos stable:

3.1ghz (345*9) vcore - 1.3625
3.2ghz (356*9) vcore - 1.4375
3.3ghz (367*9) vcore - 1.5000
 
Last edited:
opps noticed i left something out, check first post... did you get yours oem or retail?
 
going to add mine but i cant get it to work in the ab9 mobo i have, hopeing to get around 3.2ghz if possible.

OEM-Fry's
SSPEC: SL9TB
PLANT: MALAY
BATCH#: Q641A268
CPU-VID: 1.325v

max oc on stock-v: 2.8ghz (315fsb) cpu-v read as 1.33 in uguru
max oc oc cpu: 3.3ghz (367fsb) bios set to 1.625v, uguru 1.59-1.61
AB9-pro(has max fsb of 396mhz) bios 1.6
MCH-V=1.35v
ICH-IO=1.55v
cooling: NINJA HS

*notes*
to get 3.4ghz stable i would have to use more then 1.7v in bios to get it stable. the last 13mhz to reach 380mhz required to much voltage to justify the oc. the voltage droop from idle to full load on both core is a .03v drop. which meant i had to raise the voltage more to get say 1.55v i would have to use 1.575v.
 
Last edited:
Retail
SL9TB
MALAY
0640AS20

1.3250V

max oc reached on stock-v. 2.97 (330*9)

max oc of the CPU 3.42 (380*9)

Gigabyte GA-965P-DS3 rev 2.0 1.38 Vcore mch/ichio stock
Swiftech mcw-5002 watercooled

NOTE:
Unable to get to 400 FSB with 1.52 Vcore and mch/fsb voltage upped .2Volts
Unable to get past 280 FSB with Biostar Tforce965PT
 
updated my post on my E4300

*edit* updated agian
 
Last edited:
OEM
sspec N/A
plant it is from N/A
batch code N/A
N/A because the writing was so faint I couldn't read it.

coretemp VID of the cpu 1.325

max oc reached on stock-v. 2250
max oc of the cpu havn't tried yet.
mobo used and voltages for cpu/mch/ichio. Abit QuadGt. 1.325Vcore, stock Vmch, stock Vich, stock Vfsb.
Cooling SI-120 with Cooler Master 120mm Aluminum fan.

Seems I took one for the team, I tried getting 260 FSB with no luck, kept rebooting. Went abck tot he BIOS upped the Vcore and it kept doing it at one time it said OS was corrput. Lowered it back to 250FSB and was good to go.
 
wicked do a quick check, run orthos while at 250. watch uguru see how bad is the v-droop is on that board would ya? i had to up the bios v to 1.35 to get closer to the actual stock-v of the cpu.
 
Hmm, first post in over 5 years now :)

Welcome, tensop
You last visited: 12-24-02 at 01:34 PM


Just a quick question,

it seems that the SL9TB stepping core2duo e4300's are a bit of a dud, can anyone confirm?
 
the sspec is not what you go by on intels... its the batch code... and its hit or miss with the lower end E4xx line.....but if i had better cooling 3.4ghz on mine would be no problem.
 
things have changed since my last cpu(pentium 3 tualatin) then :D

Mine is an L650C652 fpo/batch number, and was packed on the 11/04/2007
and appears to be an L2 core stepping
 
yea week 50 cpu , not sure about that week havent seen any at 50.
 
Wicked Klown said:
No prob, lets just hope Uguru works for me.
Click to expand...

Hey, I has to struggle with my quadgt a bit.

Start by making sure the heatsink is on right. Flash bios 1.1 from the global ABIT site (www.abit.com.tw) - clear cmos. Load failsafe defaults in the bios (reboot). Then turn off all the "CPU features" in the bios. Raise the MCH volts one step. Run 1066 strap and 533 buss speed (1:1). Start overclocking.

Hope this helps.
 
Retail from the egg
SSPEC: SL9TB
PLANT: MALAYSIA
BATCH#: Q641A387
CPU-VID: 1.325v

max oc @ stock-v: 3.006ghz (334x9)
max oc w/ upped vcore so far: 3.33ghz (370x9 at 1.47volts on air)
Mobo: DS3 rev 3.3 f10 bios
cooling: tuniq tower



I run my rig at 334x9 24/7
 
You must log in or register to reply here.

Similar threads

funsoul
Need build oc help (5900x, 3600 b-die, 3090ti)
Replies
16
Views
2K
funsoul
funsoul
X
Having issues overclocking AMD FX 8120
Replies
4
Views
2K
bassnut
bassnut
EarthDog
FEATURED *OFFICIAL* Kaby Lake Overclocking results thread!!!
6 7 8 9 10
Replies
199
Views
58K
PolRoger
PolRoger
S
Broadwell-E i7 6800k overclocking help
Replies
0
Views
693
Starkiller
S
M
Does this 4790k need delidding?
2
Replies
25
Views
5K
MstrRoshi
M
Back