Results 1 to 7 of 7

Thread: Help

  1. #1
    New Member
    Join Date
    Apr 2007
    Location
    Missouri
    Posts
    7

    M2N SLI Deluxe OC issue

    system is in my signature
    any additional info needed just ask me
    trying to get my 3800+ X2 up to 2.5Ghz i have heard that this is a stable core setting and i think thats about right for what im doing
    i can't get past the 2.2 mark at all i think everything i have tried has failed
    the settings in the BIOS can be changed the way i wish and saved however when i boot windows my core clock is still running at 2.2
    please help
    Last edited by procupine14; 04-14-07 at 12:26 PM. Reason: bad titles gather no advise

  2. #2
    Senior Member funnyperson1's Avatar
    Join Date
    Jun 2001
    Location
    Northern VA
    Posts
    10,541
    Could you tell us what settings you are changing and what you are setting them to?

    "Strong with the fold this boy is, fold you must"-NASSoccer
    its a shame you cant ban people for being ignorant fanboys....
    My Heatware
    [Gigabyte MA790X-UDP4][PHII 940BE][Thermalright Ultra90][2x2GB OCZ Reaper HPC][Palit HD4850][Enhance 5150GH][Windows 7,Ubuntu 12.04]

  3. #3
    New Member
    Join Date
    Apr 2007
    Location
    Missouri
    Posts
    7
    i have been setting the CPU frequency to approx 230 Mhz and the multiplier is at x10 the RAM is sitting at 2.0v and the chipset voltage has been increased slightly seeing as the only time i got a clock higher than 2.2 was when i adjusted that im assuming thats the problem but when i restarted it dropped the clock down again
    i also have my vcore offset turned on
    right now it will not go higher than the 2.2 mark

  4. #4
    Senior Member funnyperson1's Avatar
    Join Date
    Jun 2001
    Location
    Northern VA
    Posts
    10,541
    Have you disabled Cool and Queit and C1E bit? Also what are you using to verify the speed, could we get a CPU-Z screenshot?

    "Strong with the fold this boy is, fold you must"-NASSoccer
    its a shame you cant ban people for being ignorant fanboys....
    My Heatware
    [Gigabyte MA790X-UDP4][PHII 940BE][Thermalright Ultra90][2x2GB OCZ Reaper HPC][Palit HD4850][Enhance 5150GH][Windows 7,Ubuntu 12.04]

  5. #5
    New Member
    Join Date
    Apr 2007
    Location
    Missouri
    Posts
    7
    sure no prob on the sn of cpu-z


    cool and quiet never worked properly and has always been disabled
    as for C1E bit i am unsure of what that is sorry

  6. #6
    New Member
    Join Date
    Apr 2007
    Location
    Missouri
    Posts
    7
    update i just flashed to the beta form of the new BIOS and we are up and running right now im sitting at2.249 which was a test run to see if i could pull over 2.2
    now what should i mess with and what shouldnt i mess with?
    should i turn on the vCore offset
    what would be a good voltage for my processor to run at etc.

  7. #7
    New Member
    Join Date
    Apr 2007
    Location
    Missouri
    Posts
    7
    ok problem solved with the BIOS flash
    now stable at 2.4Ghz
    thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •