Results 1 to 1 of 1
Thread: IN9-32X MAX Memory failure
04-19-07, 08:36 PM #1
IN9-32X MAX Memory failure
OK so i am completely lost on whats going on here. 2 boards in a row Dimm Slots 1 and 2 (Opposite Channels) die on me. if a single stick is installed in either of those 2 slots a get a C1 error and a long continuous beep. i put the same stick in slot 3 or 4 and it posts fine.
Here are my system exact details.
Thermaltake armor Chassis with 25CM fan
Abit in9 Running Beta BIOS 1.2 r3
Intel QX6700 cpu Engineering sample 2.66GHZ @3114 1.35V
OCZ 1066MHz SLI Ready dual channel Kit Nvidia SLI logo running unlinked @ 900MHz
2x EVGA 8800GTX 768MB SLI enabled not overclocked
PCI-E x16 1 and 2 @ 105MHZ
Enermax Galaxy DXX 1000W PSU
Anyone have a clue how the same thing happens on 2 different boards. the memory was swapped once and it ran memtest86 fine first time i got the new board to boot. so it started out fine. it happens almost exactly 2 weeks after having the system up and running.
What i was doing right before it failed
I had just finished running a test of 3dmark06 and got a score of 14k with the new nvidia drivers. i turned on my FAH before going to bed and was browsing the net using opera to look at some FAH stuff and i got a blue screen that gave me an error msg DRIVER_IRQ_NOT_LESS_OR_EQUAL and then death.Intel Core I7 X980 6 Core CPU @ 4.27Ghz
Corsair H50 CPU cooler with Intel server 120mm fan
Intel DX58SO Smack Over motherboard
6GB OCZ DDR-III 1600Mhz (3x2GB) (OCZ3P1600LV6GK)
1x Intel X25-M 80GB SATA SSD Drive
2x Gigabyle Radeon HD 5870 1GB XFire (Vantage 31857)
Enermax Galaxy Evo 1250w PSU
Thermaltake Armor Chassis
LG Blu-Ray + Sony DVD-RW