Results 1 to 7 of 7
09-21-07, 01:13 AM #1
Diamond Plate Steel Cube Case Project
Tomorrow morning Im gonna start building my Diamond Plate Steel Cube Case from scratch (15"x15"x15"). I dont have a fancy 3D program to show my design. So I just scanned the sketch I did. Its gonna have around 5 or 6 120mm fans.
The bottom half of the case is gonna have the diamond plate steel, and the top half is gonna have acrylic windows.
Im thinking of painting the Inside stuff Red and the outside Black.
Should I leave the diamond plate chrome? or paint it?
09-21-07, 04:16 AM #2
Red goes well with Black. Silver with Blue. Dont forget to get your self a forklift. Diamond Plate Steel is heavy.
09-21-07, 04:22 AM #3
Premium Member #3
- Join Date
- May 2006
- South Dakota
Leave it chrome, that would look awesome.Desktop: Gigabyte Z77X-UD5H | 3570k | 32 GB | GTX 770 Classified | 1 TB Samsung Evo & 2 TB HDD | Windows 3.1 | 4x 2560x1400 Monitors
VM Server 1: Dell R710 | 2x L5630 | 96 GB RAM | 8x 300 GB Savvio | IBM M1015 | 34 TB Raw disk | XenServer
VM Server 2: Dell R710 | 2x L5630 | 96 GB RAM | 8x 300 GB Savvio | XenServer
Router: Biostar A68N-5000 | Silverstone ITX case | 15w pull | pfsense
"That's not overkill, or a lot. That's just thiderastic." -txus.palacios
"Clouds are silent, cold, and wet. Servers are none of these things." -Bobnova
Current projects: Rackmount Overkill (New) | Little Overkill (New)
Articles: Rack Mounting 101 | Dell Perc 5/i Throughput Benchmarks
Want to talk directly to all the moderators at once? Call the Mod Hotline!
09-21-07, 09:24 AM #4
09-21-07, 09:37 AM #5
get it done in smokey chrome
Cooler Master HAF 932 Asus P5Q-PRO E8400 4050mhz
Tuniq Tower 120 Crossfire Diamond HD4850's 512mb a piece
2x2 GB OCZ DDR2 1066 Platinum OCZ GameXStream 600W
SPC in the US ARMY working on AH-64D Appache Longbow Attack Helicopters
Yes I work on a $47,000,000 computer that has two jet engines attached to it A LOT of spinning parts and of course... Rockets, GUNS, and Missiles
09-21-07, 10:08 AM #6
He should paint the backgroung on the diamond steel black and leave the diamonds unpainted.
09-24-07, 04:55 PM #7