The trim is mostly for decoration, sort of. It doesn't add strength to the plates. However, it does add threaded mounting points. Threading MDF is an okay proposition, but it strips easily, especially for anything under hi tension or frequent screwing/unscrewing. But threading the aluminum makes for a hi strength permanent threading.
Not sure what you mean by "countersinking" the brackets? Which brackets?
The only threading in MDF I've done was drilling pilot holes, then screwing a wood/drywall screw in. After a dozen removals, the threads started getting loose... Nothing a drop of wood glue couldn't fix.
Also I noticed the corners of the 40lb MDF subwoofer box that I frequently install/uninstall from my car becomes banged up; I was thinking the aluminum trim helps protect against that sort of damage.
Yup, that's wood trim. Now days I use aluminum trim, and I don't countersink them. The bracket goes over the aluminum trim--I thread the hole thru the aluminum and then into the MDF.
I signed up for this forum specifically because of this thread, yet it seems I can't PM? These are great looking stations and I was wondering if you were still building them.
Thanks for the interest. I do continue to make stations, I'm currently on #24, and I make them at a rate of about 2 every 4 weeks. The current waitlist is 3 deep.
I use ocforums as a screen, so yes, you need a certain number of posts before accessing my for sale thread in the for sale cases and hardware section. The reason is: I don't look as myself as selling an off the shelf retail product. It is an individual hand built custom one-off piece of equipment. I make sure I know a little bit about whom I'm selling one of these babies to.
I can also be found at the xtremesys forums, the raptor pit forums, or the bit-tech forums--if you have the appropriate number of posts at these forums, feel free to contact me there.
Thought I'd make a post about the latest innovation on my stations here.
A customer posted me this pic, asking if I could replicate it:
I can't take credit for this design--he attributed it to one Vigo from Team Japan.
The concept is fairly simple. Instead of using brackets to hold the heatsink to the motherboard, you use an external frame to place a press screw to push down onto the top of the heatsink. This same system obviously has a lot of applications for non-standard heatsinks, ie LN2 pots.
If you don't mind my asking, where do you get your momentary switches? Performance-PCs?
Btw, I also wanted to thank you. I built a benching station for myself based off of your design. I used U-channel aluminium for the edges, which was probably overkill. And I went with 3/4" thick MDF. I'll post a thread about it soon.
This is my latest version of the station (#25). It again involves the press screw system, this time with hold-down brackets.
You may notice that the side rails for the adjustable press-screw gantry are incorporated into the plates and posts.
The 5.25 drives are hanging.
The radiator is in a new location (more on that later).
7 hard drive slots. PSU bracket #1 of 2.
Psu slot #2.
Radiator is mounted up here, per the client's request. There are also 2 adjustable feet to stabilize it. Again, the brackets should fit any radiator that I'm aware of. Make sure to use washers for a better fit and to not scratch the radiator's paint job.
I developed 2 types of hold down brackets. The first is my X bracket:
You may notice that it should fit any sized pot. It is made from laminated pieces of 1/16th aluminum strip, bolted together. Really, it should be machined from solid aluminum, but I haven't got the tools to do that.
The X form factor is nice because it can fit any pot without adjustment, but it doesn't leave a lot of pouring room: however, I did include a funnel holder:
Hold down bracket #2 I call my "rail style" bracket:
It is currently configured for a f1ee pot, which is represented by my wooden blocks. To fit other pots, you would have to drill a couple of new holes.
But it does offer a much larger pour-hole.
Altho, again, you can attach a funnel holder (I might use a metal funnel tho):
I'm updating this thread because some new versions of my station have been developed.
This was Station#27, sold....to myself. Decided I was going to keep this one, unless someone offers me a price I can't refuse....but note all talks of money must be done on the for sale thread.
Looks like a standard station to start:
But, now it gets interesting:
I used a "Cordova" deep red/brown stain from Sherwin Williams.
This was then topped with several coats of high gloss oil based polyurethane:
Staining MDF is a little technique I worked thru on a recent furniture project.
There are countersunk holes. The screw head sits in the hole, so it is below the surface (and so won't drag). On the other side, the screw is held in place by a rubber washer, which also absorbs vibrations.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.