I recently purchased a PC Power&Cooling 610W@40C (670 Peak) and
it seems to be at full capacity.
Speed fan and PC wizzard report low +12V(11.78) and +5 volts(4.80)
However upon doing some reading here I used a volt meter on the last availble molex plug and get a healthy +12.5 and +5.2.
Can the software be that messed up? The Bios also reads the low volts.
I seem to be bottlenecked with my overclocking with the G-Skill 4 GB.
I was thinking of sending the P/S back but after reading the voltmeter I am allot happier.
Using the PC power&Cooling guide I should of got a bigger one. http://www.pcpower.com/technology/power_usage/
I am slightly O/C'd to 3.50 GHz 14X217. I just up the memory from 200.
I run cool 30C/43C and stock Vcore.
with 5 hard drives and 4 fans , 1-120mm case,1-90 cpu, 2-90 case
I have the 2 PCI-E 6 plugs in the 8800GTX
What are your thoughts on the load?
it seems to be at full capacity.
Speed fan and PC wizzard report low +12V(11.78) and +5 volts(4.80)
However upon doing some reading here I used a volt meter on the last availble molex plug and get a healthy +12.5 and +5.2.
Can the software be that messed up? The Bios also reads the low volts.
I seem to be bottlenecked with my overclocking with the G-Skill 4 GB.
I was thinking of sending the P/S back but after reading the voltmeter I am allot happier.
Using the PC power&Cooling guide I should of got a bigger one. http://www.pcpower.com/technology/power_usage/
I am slightly O/C'd to 3.50 GHz 14X217. I just up the memory from 200.
I run cool 30C/43C and stock Vcore.
with 5 hard drives and 4 fans , 1-120mm case,1-90 cpu, 2-90 case
I have the 2 PCI-E 6 plugs in the 8800GTX
What are your thoughts on the load?
Last edited: