Results 1 to 8 of 8
  1. #1
    New Member
    Join Date
    Nov 2005

    help OC am2 X2 4600+EE first timer

    hey all, this is wat i got. ive read the OC guide, and i get a general understanding of wat happens, i jst need alittle more assistance
    could anyone tell me wat the time limit is for this chip is also?

    am2 x2 4600+ EE
    zalman CPNS9500
    OCZ PC2-6400 2gb dual channel
    asus crosshair m/b (do i need to get latest BIOS?)
    idle temp 40-44
    load temp ?(havent tried load yet)

  2. #2
    Member Kuroimaho's Avatar
    Join Date
    May 2004
    Location
    Japan, Tokyo, Ueno.
    Hard to tell what a chip can do the deviation can be more than 10% in oc even from the same stepping.

    If you have an F3 stepping you should be able to reach 3G. ADO4600IAA5CZ is written on the cpu or ADO4600CZBOX on the box.

    I recommend to check each component on its own by limiting the others as possible to see the limits of your parts.

    Drop the multiplier and the memory as well to see the max of the motherboard.
    Then set the memory to 800 and push the HT again from 200 to see how much the memory can take. Then set the multiplier to the maximum what the processor allows and see the end of the cpu.

    What remains is to find the best combination for your ram and cpu which might mean its better to drop the multi lower so you can maxmize the ram.
    Zalman Zmachine GT1000
    I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


    Zalman TNN300
    Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


    Zalman TNN500
    Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".

  3. #3
    New Member
    Join Date
    Nov 2005
    kk kools, ive found some settings this guy did for his review you rkn i could jst cheat and go with them?

    Successful Overclocks
    * 2.4GHz using 1.216v (200 x 12)
    * 2.532GHz using 1.216v (200 x 12)
    * 2.58GHz using 1.23v (215 x 12)
    * 2.62GHz using 1.26v (219 x 12)
    * 2.68GHz using 1.41v (223 x 12)
    * 2.76GHz using 1.46v (230 x 12)
    * 2.85GHz using 1.46v (285 x 10) (One core stable only)

  4. #4
    Member Kuroimaho's Avatar
    Join Date
    May 2004
    Location
    Japan, Tokyo, Ueno.
    That seems to be an F2, better test for yourself as if yours is an F3 it might hit 3G on stock V, check the box or the top of the cpu, would help if you could post the numbers you see there.
    Zalman Zmachine GT1000
    I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


    Zalman TNN300
    Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


    Zalman TNN500
    Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".

  5. #5
    New Member
    Join Date
    Nov 2005
    where can i locate this number you speak of?
    i fink i found wat ur talkn about ADO4600CUBOX
    Last edited by nooby02; 03-14-08 at 06:46 AM. Reason: found answer

  6. #6
    Member Kuroimaho's Avatar
    Join Date
    May 2004
    Location
    Japan, Tokyo, Ueno.
    Then here is your processor. LINK

    If you search for it these are the released processors based on F2 core. LINK

    The high end models overclocked to 3G I think it is a safe bet to say is yours can do 2.6-2.8G.
    Zalman Zmachine GT1000
    I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


    Zalman TNN300
    Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


    Zalman TNN500
    Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".

  7. #7
    New Member
    Join Date
    Jul 2008
    4600+ to OC @ 3Ghz.

    Multi set to x 11.0
    1.420v
    FSB 272
    = 3Ghz stable.

    30'c - 35'c for me.

  8. #8
    Member Kuroimaho's Avatar
    Join Date
    May 2004
    Location
    Japan, Tokyo, Ueno.
    Welcome to the forum, it is more informative if you post you hardware besides the results.
    Zalman Zmachine GT1000
    I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


    Zalman TNN300
    Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


    Zalman TNN500
    Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •