Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Aug 2006
    Posts
    82

    Help With Ocing Striker Extreme

    I'm trying to figure out what settings to use for my QX6850 and Striker Extreme board. Its stock speed is 3.0 trying to see if i can get 3.6 is this doable for this board??I'm running Win vista Ultimate 32bit Ver. i have the lastest BIO update. Anyone can offer any help on what setting to use??

    Also this is what i have try so far..

    keeping my multiplier at stock 9
    i changed the FSB 1600
    DDR Mem set at 800
    Set vcore at 1.375
    everything else left at default or auto

    Is there anything else I'm missing it boots into windows but right after it starts loading my start up i get a blue screen?? Am i missing anything here?
    Running windows Vista 32bit

    P.S Hardware Spec. listed below..

    Thanks


    -------------------------
    Intel Core 2 Extreme QX6850
    2X SLI e-GeForce 8800 Ultra Superclock
    ASUS Striker Extreme
    Silencer 750
    Swiftech Water Cooling
    COSMOS 1000 FULL TOWER
    CORSAIR 2GB (2 x 1GB) DDR2 800

  2. #2
    Registered
    Join Date
    Aug 2006
    Posts
    82
    Does anyone have any ideas about this board..

    Ok this is where I'm at i have my i have my QX6850 running at 3.4 using the following settings... multiplier at 10 running at 1360 (340) and a 800 FSB and my vcore is at 1.375 idle at 51 and under full load goes to about 57 58 are these temps ok plus the main question i have on the striker extreme board i'm using i read a article saying these setting should be disable?? can anyone confirm if this is true?
    the following should be disable???

    CPU Thermal Control
    C1E Enhance Halt state
    Intel Speedstep
    CPU Spread spector
    PCIe Spead spector
    PCIe """" (SSP)
    PCIe """" (MCP)
    SATA Spead Spector.
    should all these be disable??
    Also please mention anything i might have miss.

    Thanks

  3. #3
    Seņor Senior Member Nebulous's Avatar
    Join Date
    Oct 2002
    Location
    The Empire State
    Posts
    8,874
    Yes, All of these setting should be disabled:

    CPU Thermal Control
    C1E Enhance Halt state
    Intel Speedstep
    CPU Spread spector
    PCIe Spead spector
    PCIe """" (SSP)
    PCIe """" (MCP)
    SATA Spead Spector.

    Disable them in bios and reboot.

    <MEGA-O>
    ASRock Z97 Extreme 6 /i7 4790K De-Lid @ 4.7GHz
    16GB GSKILL Sniper F3-17000CL11D-8GBSR @ 2400
    H2O=XSPC Rasa Black / RX360 / MCP-655 / MCRes
    Corsair Force 3 SSD 120GB x2=Raid~0 / WD VelociRaptor 300GB
    Gigabyte GV-R797OC-3GD WF3 @ 1100/1500 w/ModBios
    Sony AD-7220S / Seagate 500GB / Lite On LH-16A1S
    SilverStone Zeus SST-ZM1350 1350w
    CM Cosmos 1000 / Win8.1 x64
    ** Under TITLE II, SECTION 210.340 it is legal to overclock **

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •