I'm trying to figure out what settings to use for my QX6850 and Striker Extreme board. Its stock speed is 3.0 trying to see if i can get 3.6 is this doable for this board??I'm running Win vista Ultimate 32bit Ver. i have the lastest BIO update. Anyone can offer any help on what setting to use??
Also this is what i have try so far..
keeping my multiplier at stock 9
i changed the FSB 1600
DDR Mem set at 800
Set vcore at 1.375
everything else left at default or auto
Is there anything else I'm missing it boots into windows but right after it starts loading my start up i get a blue screen?? Am i missing anything here?
Running windows Vista 32bit
P.S Hardware Spec. listed below..
Thanks
-------------------------
Intel Core 2 Extreme QX6850
2X SLI e-GeForce 8800 Ultra Superclock
ASUS Striker Extreme
Silencer 750
Swiftech Water Cooling
COSMOS 1000 FULL TOWER
CORSAIR 2GB (2 x 1GB) DDR2 800
Also this is what i have try so far..
keeping my multiplier at stock 9
i changed the FSB 1600
DDR Mem set at 800
Set vcore at 1.375
everything else left at default or auto
Is there anything else I'm missing it boots into windows but right after it starts loading my start up i get a blue screen?? Am i missing anything here?
Running windows Vista 32bit
P.S Hardware Spec. listed below..
Thanks
-------------------------
Intel Core 2 Extreme QX6850
2X SLI e-GeForce 8800 Ultra Superclock
ASUS Striker Extreme
Silencer 750
Swiftech Water Cooling
COSMOS 1000 FULL TOWER
CORSAIR 2GB (2 x 1GB) DDR2 800