hi
bit late to post this now
being its 2010 and everyone whos anyone has an i-series
~
but i got my q8200 to 3.23GHz @ 1.5v stable
i could dial back the voltages or dial up the fsb.
ram is at 940mhz set on the bios to 400mhz nb link.
~
but honestly im too lazy.
i had to pimp the entire bios to get this speed
~
all the adjustable voltages on north and south bridge are set to thier highest,
the cpu voltage is set to 1.5 and the ram is set to 2.2v-2.3v
fsb 460
(ive not bothered trying above 480 with this voltage i just wanted to get it stable, as the ram wasnt stable at 430, ram timings set to auto)
just a note. ocz. (utter WASTE of money! buy ANYTHING ELSE!)
~
asus p5q se2
ocz gold 8500 ddr2 2x 2gb
~
HTML:
http://valid.canardpc.com/show_oc.php?id=1147372
~
gtx 260 (xfx pre-overclocked) gpu
550w corsair sli psu
~
1x 500gb wd cb
1x 1000gb wd cg
1x 1000gb samsung f3
~
lian li tyr x-2000
~
monitor 1 - samsung 24" p2450
monitor 2 - viewsonic va1912w
~
cpu cooler - zalman 9500 tunnelcooler.
~
temps at idle range from 30c-37c depending on case fans and windows open.
~
full load peak temp on core #0 61c the rest remain around in the high 50's
~
ran 3hours of x64 prime95 custom blend utilizing all the ram, and an hour at least for the 3 preset tests.
~
currently had been on 20hours solid no fails.
no lag. only issue i have is that i use up my 4gb of ram very quickly on win7 x64.
~
i don't like to single task.
~
its multi-screen, multi-tasking, cs:source, battlefield badcompany 2, cs5 ps x64, cs5 bridge, 30+ google chrome tabs, itunes x64, vlc, winrar, teamspeak, coretemp, prime95 (only when i forget its running and leave it on)
~
if only i could have 3x 30" apple cinema displays/ dell ultrasharp displays.
i would be doing even more!
~