AMD Phenom II (Results Only Thread)

As per request and also to help us out to see which system boards, ram sets, cooling, etc play nicely with PII here's a thread to help us do just that. This is ONLY for results.
Any discussion can be had here or your more then welcome to start your on thread if you need serious attention with you system.





ONCE AGAIN RESULTS ONLY!!! any other post will be deleted






Example of a result. We will need your system components.

CPU = AM2+ 940 Phenom II (stepping would be nice)
mobo = Asus M3A79T - Deluxe
Ram = 2x1gb PC6400 g-skill 2GBHZ (d9's)
HD = 2 x 74gb raptors in raid-0
PSU = Corsair 520HX
PCI-e = PNY 8800gt
Cooling = Stock HSF or True 120 Black
Cased system or open bench table or put in the freezer



Then we will need the best you got out of it. A screen shot would be best for this. It would be best to have the result being a stable one. If you would like you can post a max benchable result also to go with the stable result also but be sure to keep all the information in your one post. Try Not To Put More Then Two Results In Your Post However. (i.e. stable overclock and max benchable)



For Screen shots be sure you include two cpu-z's one on the cpu tab and one on the memory tab. Also a superpi or wprime run in there would be really nice at the least. Any other benchmarks you would like to include in the screen shot would be great...



"Result Stats"





Thanks, This thread will be moderated.
Jonspd

CPU = AM2+ 940 es Phenom II (stepping I have to get soon)
mobo = MSI-K9A2 plat v1
Ram = 2x1gb PC6400 tracers (d9's)
HD = 1x150gb raptor X
PSU = Corsair 620HX
PCI-e = Evga GTX260 SC
Cooling = 9700led
Cased system


These results where both 10 hours prime95 stable










Max benched

AC's PhenToo on a DFI (Dragon Fly Incinerator)
3.2 Passed 1.39Vcore, 1.25V NB -(ran fo one week gaming, folding, ripping, surfing, sleep mode, off at night. Not cold bugs, reboots or crashes.
3.3 Passed 1.4Vcore, 1.3V NB, ---OCCT and 3 hours folding. CURRENT SETTINGS

Now that we know about the NB, I doubt the 1.4VCore is needed and will test that.


PhenOne - 9850BBE 2.55G - Cinibench = 9915
---
Phentoo - 940BBE 1.250V. 3.0G - Cinibench = 12547
Phentoo - 940BBE 1.250V, 3.22G - Cinibench = 12818
Phentoo - 940BBE 1.325V, 3.3G - Cinibench = 12986
Phentoo - 940BBE 1.400V, 3.4G - Cinibench = 13247 - 35 Mins of Orthos on 4 cores
changed to Cosair XMS2 CL4 until I get the new GsKills.
Phentooy-940BBE 1.456V, 3.6G - CiniBench = 14488 - 30 Mins of Orthos on 4 cores


1.4V booted at 3.6G but did not survive Orthos, reboot

Temps are stying in the low 50s max. 3.4G mostly stable at 1.4V is good. So far it's tracking about .5V above my Kentsfield.

---------------------------------------------------
VID = 1.35V These are just preliminary tests and logs to see where the voltage thresholds are.
Undervolt testing. 1.275
1.275V boots fine, surf but 2 cores of othos failed after 10 mins while playing Harvest Massive.
BSOD = 0
BOOTFAIL = 0
Temps 31C idle 37C 2 core loaded.

Undervolt, 1.312VC 1.212NB
2 cores orthos 45-60 mins
3.2 Passed
3.3 Failed at folding.

DFI LP790FX UT - SB600
2 x 2G Corsair 6400 CL4 XMS2 or 2x2G Gskill 8000 CL5
500VX Corsair PSU
WD Caviar and 300G Velociraptor no Raid
Sunbeam Core Contact Freezer.
HD3870XT 512

Reserved for Synthetic_Fenix

Started playing, haven't sized my Screenies yet, but So far the Highest I can get is 3.8, it will not load windows above that and I even tried 1.65v.

Specs:
Gigabyte GA-MA790GP-DS4H
4GB Corsair Dominator DDR2 1066
DTek Fuzion V2 waterblock
OCZ GamesXtreme 700Watt

Air cooling

AMD Phenom II X4 940 Black Edition (3.00GHz, 45nm)
Foxconn A79A-S 790FX+SB750
4GB PQI DDR2-800 (2x2GB)
Xigmatek HDT-S1283 120mm
2xWD5000JS RAID-1 (Areca ARC-1220)

---Suicide (Not Checked for Stability)---
At Stock vCore (1.35V): 3600MHz Max, 3600MHz 10.386s wPrime 32M
Overvolted (1.40V): 3800MHz Max, 3700MHz 10.154s wPrime 32M
Overvolted (1.50V): 3900MHz Max, 3800MHz 9.857s wPrime 32M





More later...

Reserve for later

Place Holder for a BE 940

Specs:
Foxconn A7DA-S AM2+
4GB Gskill PC 1066 DDR2 Ram 5/5/5/12
4870 512MB non Reference Cooler
Sunbeam Core Contact (DHT 4 8mm heatpipes)
Antec 550 Watt Modular PSU.

Well i've been working all night long on this thing, It's hard adjusting to learn how to OC a Phenom. I've tried as hard as I can to hit 4ghz with it on my Lapped True Black 120 Dual S-flex setup. It's an incredibly fast system! I can get it in at 3.9 but 4.0 is simply a no go, i've even tried a run at 1.6v (was idling about 40c) I'm sure I can get better with it by learning how to mess with the north bridge and such.

THe one thing that's seriously bothering me is the fact that I can't run Dual Channel. The true sits too low and my Corsair Dominators are just too tall I'm going to shut it off for the night and let the poor thing rest. enjoy!

Another placeholder..

Initial OC results, no where near done but..









3dMark06 w/ (2) 3870's (840/1220) - http://service.futuremark.com/compare?3dm06=9583694

4.2Ghz 3dmark



3DMark Score 21137 3DMarks
SM 2.0 Score 8529
SM 3.0 Score 9705
CPU Score 5990

http://service.futuremark.com/compare?3dm06=9662064

4.3Ghz SuperPI



4.3Ghz 3dmark



CPU = AM2+ 940 Phenom II cacvc ac 0850bpdw
Mobo = Asus M3A79T - Deluxe
Ram = 2x2gb PC6400 Corsair Dominators
PSU = Corsair 650 TX
PCI-e = 2x VT 3870 512
Cooling = W/C - DD MC-TDX or Vapochill LS

CPU = AM2+ 940 Phenom II
Mobo = Asus M3A79T - Deluxe
Ram = 2x2gb PC6400 Pi
PSU = Corsair VX550
PCI-e = 9800GTX+
Cooling = Fuzion v. 1, PA160, Laing D4 pump
Case = Antec SX1200 modded for watercooling

The following were just barely stable enough to run, but were fun to do.



3DMark 2001 SE - 60819 3DMarks- - http://service.futuremark.com/compare?2k1=9474474

3DMark 03 - 48954 3DMarks - http://service.futuremark.com/compare?2k3=6071026

3DMark 05 - 25572 3DMarks - http://service.futuremark.com/compare?3dm05=4776138

The next one (3DMark 06) was run at 3800, where this machine runs perfectly stable:

3DMark 06 - 17528 3DMarks - http://service.futuremark.com/compare?3dm06=10211291

I'll go ahead and reserve a spot. Jon are you going to make a table for the top or something? That would be hella handy for reference and whatnot.


CPU = Phenom II 940
mobo = Gigabyte MA790GP-DS4H
Ram = 2x1gb PC8000 Team Xtreem
PSU = Gigabyte ODIN Pro 1200w
GPU = HD 4850 or GTX 280
Cooling = Everything but water

Some brief memory testing...

CPU = AM2+ 940 Phenom II (CACVC AC 0850 BPDW)
mobo = MSI K9N2 SLI Platinum (nvidia 750a)
Ram = 4 x 2048MB PNY PC2-5300 (Nanya)
HD = 1 x 500GB Seagate SATAII
PSU = Mushkin 650W
PCI-e = XFX GTX260 (192SP)
Cooling = Xigmatek S1284EE (Delta 120SHE)
Closed case sitting on my desk

Still trying to come up with a good result, should be somewhere in the 3.6 to 3.8 range

3.8GHz (19x200MHz)

CPU = AM2+ 940 Phenom II (see screenie)
mobo = Foxconn A7DA-S BIOS 81BF1P06
Ram = 2x2GB DDR2 1066 G.Skill F2-8500CL5D
HD = 150GB WD Raptor (os drive), 160GB Maxtor SATA (data drive)
PSU = Corsair CMPSU-650TX PSU
PCI-e = Asus EAH3870
Cooling = Arctic Cooling Freezer 64 Pro
Cased system



Bill

Super PI Runs

CPU: Phenom II 940 BE (ES)
MotherBaord: ASUS M3A79-T Deluxe
Bios: 0602
Memory: G.SKILL 4GB(2 x 2GB) DDR2 1066
HD = 2 x 500 GB WD
Power: Ultra X3 1000W
Graphics: 3x VisionTek 4870 512MB
Cooling = Swiftech Apogee GTZ (Custom H2O)


Here is a suicide SuperPI run @ 4340MHz with 3080MHz North Bridge Clock on Windows 7 x86. Also added is a Vantage run on Windows 7.

[edit] new clock. put a fan on the NB to reduce ambient case air. 3.82GHZ:

CPU: Phenom II X4 940 (CACVC AC 0850BPDW)
MotherBoard: DFI LanParty DK 790FXB-M2RSH
Bios: 1/16/09 Beta
Memory: OCZ PC2-8500 Reaper - 2x2GB
HD = 1 x 500GB SATA2 WD
Power: Corsair HX620
Graphics: Nvidia GeForce 8500GT (stock)
OS: Windows XP32 SP3
Cooling = Water

http://img128.imageshack.us/img128/7261/finalphenomii3w.jpg

My rig :
Mainboard : Gigabyte MA790GP DS4H
Memory : 4 Gigaz zeppellin dual ch kit
GPU:2 Atis Radeon HD 4870 512mb both in crossfirex
Power suply: Corsair 620 HX
HDD: WD 1tb 7200 rpm 16 mb buffer caviar black
OS: Windows XP Media Center
Cooling : Water or Thermalright TRUE Copper Ultra-120 extreme CPU Cooler with some vents improvised by me

3.6 GHz, NB = 2.6 GHz, HT = 1.8 at 1.375V BIOS, NB = 1.35V

Max load temp using Core Temp reading with Intel linpack test 64 bit at 56C.

ECC enabled, CPU Tweak Enabled, CPU Instruction Prefetch Enabled

See signature for information on setup and hardware.

Stablity testing in progress. So far it has passed 5 Intel Linpack Stres Tests with full memory enabled.

We're at 3.8ghz. Stock notherbridge, stock memory voltage. This is as high as she'll go till i replace my 500W PSU

This is as high as I can go till I get some temp problems worked out.



this is as high as I can get her stable on air

SUICIDE