- Joined
- Dec 4, 2008
Thanks for taking a peek at this thread and possibly your advice for helping stablize at 3.52GHz.
I'm currently STABLE at 3.40GHz.
PASSED LINPACK 7 loops #2 <==
Stable 15 hrs with Prime95 small FFTs <==
============
These are my current settings in BIOS stable at 3.40GHz.
============
Below is a chart that I tried with 3.52GHz but failed with just almost about every setting. I can boot into OS and use light application without any problem. I can run SuperPI 1M with no fuss..... but would FAIL Prime95 small FFTs instantly.
Please notice from the table...those are the only adjustments that can be made in the bios.
Images: 1, 2, 3, 4, 5, new cooler Z600R
Spec:
Asus P5E-VM HDMI with G35 chipset (no additional graphic card added since I use its HDMI connector)
4x1GB Patriot PDC22G6400LLK
Cooler Master N520
500W Antec NeoPower
EDIT: Stable 13hrs P95 small FFTs & Linpack #2 with 8 loops at 3.52GHz with a CM Hyper Z600R cooler.
I'm currently STABLE at 3.40GHz.
PASSED LINPACK 7 loops #2 <==
Stable 15 hrs with Prime95 small FFTs <==
============
These are my current settings in BIOS stable at 3.40GHz.
============
Below is a chart that I tried with 3.52GHz but failed with just almost about every setting. I can boot into OS and use light application without any problem. I can run SuperPI 1M with no fuss..... but would FAIL Prime95 small FFTs instantly.
Please notice from the table...those are the only adjustments that can be made in the bios.
Images: 1, 2, 3, 4, 5, new cooler Z600R
Spec:
Asus P5E-VM HDMI with G35 chipset (no additional graphic card added since I use its HDMI connector)
4x1GB Patriot PDC22G6400LLK
Cooler Master N520
500W Antec NeoPower
EDIT: Stable 13hrs P95 small FFTs & Linpack #2 with 8 loops at 3.52GHz with a CM Hyper Z600R cooler.
Last edited: