Results 1 to 1 of 1
02-26-09, 09:16 PM #1
- Join Date
- Sep 2008
ASUS P5E3 Deluxe, HD 4870 x2, system locks up, USB goes down
I have a problem with my system. It is a brand new installation of Windows Vista Ultimate x64. BIOS version is 1405.
CPU: Intel Q9550 C1
MB: ASUS P5E3 Deluxe WiFi-AP @n
RAM: 2x 2GB CORSAIR XMS3 DDR3 1333 TW3X4G1333C9DHX 9-9-9-24 @1.60v 2N
Video: VisionTek HD 4870 x2
HDD: 2x Seagate 7200.11 ST3500320AS 500GB in ICH9 Raid 1. Also Seagate 7200.10 750GB and WD 1TB.
PSU: Rosewill RX950-S-B 950W
Case: CoolerMaster HAF 932
Monitor: ViewSonic VX2235WM
I have the latest drivers installed. All Windows updates are in place as well. The PC locks up at random times (I haven't even tried any games because I can't get to them) and all usb devices stop working. Lights on my usb keyboard and mouse go out. The first time it happened, Vista problems solution tool showed that I need to install chipset driver in compatibility mode and gave link to an old driver. I did install the latest Intel x38 chipset driver, version 184.108.40.2062. I didn't get any errors or anything during the installation. It also locks up when I start FIFA 09 and when I click Format of one of my HDDs. Moreover, the same thing happens when Windows Update tries to install Extras and Optional Updates.
I don't have any overclock. The only thing I changed in BIOS is I set memory frequency, timings, command rate, and voltage as specified on DIMMS: DDR3-1333 / 9-9-9-24 / 1.60v / 2N.
Some people on Corsair's forum have reported the same issue with the same memory type and P5E3 Deluxe. The fix was to increase DRAM voltage to 1.70 even though the DIMM says 1.60.
After increasing DRAM voltage to 1.70 I got a blue screen in Vista right after loading. I then booted off my Memtest86+ 2.01 CD, and it found a lot of errors. Then I put DRAM voltage back to 1.60 as showed on DIMM and ran Memtest again. After 13 passes there were no errors. No more blue screens. So raising RAM voltage didn't help.
What I noticed was that when I uninstalled video driver everything started working perfectly fine. No lockups at all. I can install updates, format hard drives, etc. First I tried the latest drivers from ATI website. Then I tried the drivers provided by VisionTek. The same thing keeps happening with both.
I have also read that people have problem trusting Rosewill PSUs. Even though techs at ASUS and at VisionTek told me that my PSU is more than enough for my system, I went to Fry's and picked up Antec TPQ-1000W. That one is on the ATI's certified PSU list for 4870 x2. I installed it, and the system locked up again and USB went down right after Vista loaded. The little speaker inside kept on beeping just like during the previous lockups. Sometimes it does, sometimes it does not.
VisionTek did replace my video card just to rule it out. I also sent my MB to ASUS for repairs. According to the records they have, it has been fixed and the BIOS was flashed. I had to update the BIOS though since the one that they put on was old and didn't even support my CPU.
One last thing. After the system locks up I have to reset the PC by pressing the button on the case. Sometimes I just turn it off. When I do, something really odd is happening. The Internet goes down in my apartment. When I look at my router, the light that shows my desktop activity flashes really fast. I can't ping anything from any of my laptops. As soon as I unplug the network cable from my desktop or just simply turn the PSU off, the Internet comes back right away
I am using the same version of Vista from the same DVD on my laptop. No problems whatsoever.
ASUS confirmed that my memory is supported by the motherboard.
I have tried my video card in both PCIe slots. It didn't help. The card doesn't get hot. Sometimes PC freezes right after Vista loads (after being off all night). So I don't think it is overheating problem. No warning lights come up on the video card.
I bought all my parts in September of 2008. I still can't get the system stable...
I think it is either that some of the drivers don't get along or that I have to change something in BIOS like PCIe frequency and all that stuff.
Has anybody experienced the same problem? Please advise.
Thanks in advance.
Last edited by RealSnaD; 02-26-09 at 09:30 PM.