Hello,
I am new to OC, so please be patient. I recently set up a new rig for myself and I am trying to do some OC. Here is my current set up (please don't say I should have gotten other hardware, because I got a great deal on what I have):
Intel i7 940
Intel DX58SO MB
RAM Corsair 3 X 2GB (6GB) TR3X6G1600C8D
Noctua NH-U12P SE1366 (and multiple other fans in case)
Vista Ultimate 64 bit
I would like to get to at least 4.0 on air, possible?
My temps right now are between 70-75C degrees running Prime95. I attached a few pictures of my settings. Can anyone tell me where I should make adjustments. I am getting kinda confused with the changes. Any help is appreciated. Thank you.
Okay, my pictures sizes are too big for upload, so here goes with my settings:
Clock Frequency: 185
Turbo boost disabled
multilplier: 21
Speed 3.89
Qpi data rate: 6.669
Voltages
memory: 1.66
QPI/Processor uncore 1.35
IOH Core 1.10
Processor Overrides:
Dynamic CPU Voltage Offset (mV) 128
100% slope
Multiplier 21
High performance Idle state
Memory Configurations
Uncore multiplier 17
Memory Multiplier 8
The rest of memory settings are from Corsair website
memory voltage 1.66
QPI/uncore voltage override 1.350
Command rate 2T
Bus Overrides
Ioh core overrides 1.100
QPI Data Rate 4.8
I think that covers the setting I have or can partially change. Anyone see anything wrong or that should be changed?
Eric
I am new to OC, so please be patient. I recently set up a new rig for myself and I am trying to do some OC. Here is my current set up (please don't say I should have gotten other hardware, because I got a great deal on what I have):
Intel i7 940
Intel DX58SO MB
RAM Corsair 3 X 2GB (6GB) TR3X6G1600C8D
Noctua NH-U12P SE1366 (and multiple other fans in case)
Vista Ultimate 64 bit
I would like to get to at least 4.0 on air, possible?
My temps right now are between 70-75C degrees running Prime95. I attached a few pictures of my settings. Can anyone tell me where I should make adjustments. I am getting kinda confused with the changes. Any help is appreciated. Thank you.
Okay, my pictures sizes are too big for upload, so here goes with my settings:
Clock Frequency: 185
Turbo boost disabled
multilplier: 21
Speed 3.89
Qpi data rate: 6.669
Voltages
memory: 1.66
QPI/Processor uncore 1.35
IOH Core 1.10
Processor Overrides:
Dynamic CPU Voltage Offset (mV) 128
100% slope
Multiplier 21
High performance Idle state
Memory Configurations
Uncore multiplier 17
Memory Multiplier 8
The rest of memory settings are from Corsair website
memory voltage 1.66
QPI/uncore voltage override 1.350
Command rate 2T
Bus Overrides
Ioh core overrides 1.100
QPI Data Rate 4.8
I think that covers the setting I have or can partially change. Anyone see anything wrong or that should be changed?
Eric