- Joined
- Dec 7, 2010
- Location
- Nampa, Idaho
I baked my 8800GTS and then got 11.1 boints oced in 3DM06. Running great after 3 weeks. Here's the thread with pics. http://www.overclockers.com/forums/showthread.php?t=664202
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
This thread cannot die. Once it stops working, we simply put it in the oven at 400 degrees for 10 minutes and it comes back to life.
Just purchased a truly dead card that I'm hoping to revive.
Yes, that thing is completely removed. I like a challenge.
Just purchased a truly dead card that I'm hoping to revive.
Yes, that thing is completely removed. I like a challenge.
BTW ANOTHER +1 for the oven trick... i got bored today, and decided to bake an old stick of DDR2 pc 4200 that was dead... im pretty sure i over heated it when i was playing with it at 2.0v 800mhz a long while back... anyways if u put it in any system it would cause the system not to even post.... for such a small item i did 6min at the standard 380ish *f i normally do.... just passed 3 hrs of memtest he he he!
Any idea if this would work for laptop mobos?
We have around 20 dv6000 with bad mobos we got for trade-ins over a few years and the HP bs recall is long gone.
We can get them fixed for $100 w/out disassembling first (anyone whose completely taken apart a laptop would know how long and annoying it is)
Hello!
I registered only to post in this thread,which is kinda odd,but meh.
I have a dead 4870 1gb sapphire,the fan starts up,as normaly (but when the GPU worked,it spined at 100% for 1-2secs,now it only spins constantly at 30-25%) ,the bios tells me that i don't have a gpu in place (1long beep,3short) and it continues to start the pc.
It got 3red led's to verify if you plugged the 2 6pin connectors,when it was working,they turned on when i forgot to connect 1. Now they don't turn on,no matter if you plugged the 2 connectors or not. It also got 3 green leds on the back,probably for power/vrm dunno,they turn on no matter what. If i don't connect the 2 pci-e cables,only 2 power up,presumably indicating that 1 vrm/power phase is not on.
I bought it from a "guy" and it died after 1 month.
I think the over-trick is the only solution nao?
Please reply quickly!