Results 1 to 4 of 4
09-17-09, 06:24 PM #1
Primochill Typhoon III looks good...
Can be used as a stand alone reservoir or have a D5 pump mounted directly into the back. With rear mounted pump, you can have 2 separate loops. With D5, it can really shine by splitting loops into 2 to get better GPM than a single loop (with and without dual pump)
I'm tempted to buy this one to complete my up coming WC set. I could set one set of in/out to rad and one to CPU and that'd leave lots of room for future expansion. The only issue is filling and draining. If you don't set one up with fill port, you would need to tip the whole case to fill or drain through the front of the res.
Think it'd be worth it? Other flashy cool reservoir I was looking at is EK Spinbay. However from Youtube video it looks like it'd add a lot of air bubbles into the flow if it's not completely full.
Primochill bay is about $66 from many sites, EK Bay Spin is a bit pricier.
If neither is good, then please suggest a nice reservoir.space for rent
09-26-09, 01:25 AM #2
09-26-09, 10:50 AM #3
i know of one build i helped with the guy got one.
i don't like the grill on the front of them though.CPU: Q6600 G0 3.5GHz@1.4v (4.2GHz max) / 4790k 4.8ghz @1.265v
GPU: 9800GTX /GTX780 hydrocopper
Ram: Samsung 4GB /gskill 16gb DDR3 1600
Mobo: EVGA-NF68-A1 680i (P32) /AsRock Extreme6
PSU: Enermax Galaxy 850Watt /EVGA 850 G2
HDD: OCZ 120GB Vertex4, Samsung evo 840 250GB
LCD: Samsung 32" LN32A450, Samsung 226BW 22" wide
Sound: Logtiech Z 5500
CPU & GPU: 3x Swiftech MCR320, 2x MCP655, Apogee XL, 18 high speed yates @ 5v
10-04-09, 03:35 AM #4
this is a POS you are better off with a y splitter. That review is flawed because it breaks 1 single loop and measures it twice. I've played with this unit and it serves as a bay pump at best and potential to leakings due to the material. I would get one if EK made one out of machined acetal but that acrylic is just too cheap imo.
Everything in the box is pretty crappy, the fittings are so usless. $70 you better off with another pump.