Results 1 to 6 of 6
Thread: ASUS P6T Delux V2; Ram Channels
10-01-09, 12:46 PM #1
ASUS P6T Delux V2; Ram Channels
I know this may be a topic for the Ram section, but no one has given an answer that uses this P6T board. On this particular board there is a note in the manual that says:
"Due to INTEL spec definition, X.M.P. DIMMS and DDR3- 1600 are supported for one DIMM per channel only"
what does this mean specifically? is it for XMP OC's or OC's with DDR3-1600mhz ram? I interpolate this as if i was to put "6gigs of Corsair DDR3-1600mHz" (or any 1600mhz) ram then it could only be 2 gig sticks in channels A1, B1 and C1. However, if i wanted 12 gigs of ram, how would it work since i could only place one DDR3-1600 per channel to get?
or am i just not comprehending my reading? I am a newbie to the deeper fundamentals of the inter-workings of computer "tuning" and OC'ing.
10-01-09, 01:14 PM #2
Underneath that statement in the manual, it says...
According to Intel spec definition, DDR3-1600MHz is supported for one DIMM per one channel only. ASUS exclusively provides two DDR3-1600 DIMM support for each memory channel
Corsair TR3X6G1600C8D (XMP) 6GB (kit of 3) DS 8-8-8-24 1.65v
10-01-09, 05:01 PM #3
- Join Date
- Jan 2008
are you asking whether that means 2x1600 + 1x1333 per channel? Is a channel 3 RAM sticks in the say yellow/green/whatever colour depending on board?
So are you asking would all the RAM in a channel run at 1333?
I know next to nothing so forgive me if this makes no sense.Motherboard - Asus P6T Deluxe v2
CPU - i7 920 @ 3.8Ghz
CPU Cooler - Corsair H50
RAM - 6GB DDR3-1333 (Super Talent 3x2GB - WA133UX6G8)
Videocard - GTX295 1792MB
Chassis - Aerocool Zerodegree Gaming Chassis
PSU - Corsair TX850W
10-01-09, 10:49 PM #4
K, got ya! thanks for the reply, I am still learnin, and these forums have been real helpful! the ram i curently have does not support XMP, but i a, wanting to practice OC'ing with these i have now, then move to an XMP set to see and practice the interworkings of my overall system...
10-06-09, 10:32 PM #5
10-14-09, 12:14 AM #6