Results 41 to 59 of 59
Thread: The Sled Acrylic Tech Bench
11-17-09, 04:59 AM #41
Any reason you didn't wire it to your 5V rail/wire in parallel/something else? I guess overall in the long run 2.7w isn't much, but that's three times the power usage than the LEDs they are for![HEAT] -
Sony SZ650 /// T7500 /// 3 GB ram /// 8400M GS /// OCZ Vertex 2 60GBded :(
11-18-09, 09:24 AM #42
11-21-09, 02:35 PM #43
# Update 11-22-2009
Just a Little Update
Had to Run down the Street to Local PC Shop to get another DWA-110 USB Wifi Adapter for more testing of the Sled Hardware,
and also I need to get myself another KVM too, I have one but its in use in the Office, so need to get one for the garage Bench too!
DWA-110 USB Wifi Adapter
Unpacking the Contents
DWA-110 and its USB Cradle + software install disk and install manual (Install disk not needed for Windows7)
The great thing about these Wifi adaptor is that comes with a USB extension Cradle so you can easily put up on shelf for maximum better Reception
Also with Windows 7 you dont need install CD just plug in and Drivers already get installed then just connect to Wifi App, easy as pie! :good:
That,s all for now have some cleanup work to do on the Sled and install Boinc Client for Rosetta@home Folding , and some more testing on the Test Bench,
So Stay Tuned!
11-23-09, 03:49 PM #44
# Update 11-24-2009
Another small Update,
Had hopefully planed a larger update with all Hardware installed, but PSU from Canada is
still not here, but according to the Tracking Details it has arrived in Australia, Sydney
Customs has cleared parcel to be Transported on to Melbourne and then to me, so wont be too far away, hopefully by end of week!
So today I have been cleaning up wiring and doing some modifications for Top and side fan
Power and Led power.
Power connection Block for Top Fans
Power connection Block for Side Fan and LED Power Switch
Now until the New PSU gets here I cant install the Motherboard into the Sled,
The Other PSU I was going to used I had to extend the 12v 4pin ATX mother board cable,
which I did, but the 24 pin is also too short,
I did order a 24pin extension as don't have any correct size wire left to modify it, only
to find out today that they have back-ordered the Part and wont be Available till Mid
December maybe, so that has now been Cancelled.
So will for now just put an old PSU I use for testing purposes to power fans and LED
lighting in The Sled - Acrylic Tech Bench for some Final pics, and hopefully the Rest will
get installed by the Weekend!!
see next post for some Final Teaser Pics
11-23-09, 03:56 PM #45Continued Update 11-24-2009
Teaser Final Pics
Ahh there some thing Missing in these pics,, and I have misslaced them so will be in next
lot of Pics when I find then,
Can you guess what they are, what is missing!!!
Hopefully by the Weekend can have some more Final PiC,s with the Motherboard and all
Thanks for Following this project and Stay Tuned for more exciting things to come!!!
To Be Continued!!
11-26-09, 07:47 PM #46
b]# Update 11-27-2009[/b]
Today after a rather long Night, Stripping Down My Main Rig, and Removing the Corsair HX-520 PSU, so as to put into The Sled.
Then it was onto the PSU Install to The Sled along with all the Hardware.
Now Remember back to the Teaser Final Pics where I said there was something missing, well here is what was Missing The Name Emblem, for The Sled, and Ozito sponsors Name Badge,
The Name Emlems
So that Now I can Prouldly Say ,,,,,, Its Finished,,, Completed ,,,Done,,, Finally!!
Thank You for taking interest , and Following my project,
Now wonders What I can do next ?????
11-26-09, 09:04 PM #47
looks great man. very well put together log and descriptions.
11-27-09, 11:52 AM #48
11-27-09, 12:05 PM #49
Man... that's looks awesome JS!!! Way to show off the goods!
The only thing that would make it better is if you could actually ride it down a hill.
Again, I hope you win the modding contest!!!
11-27-09, 06:50 PM #50
11-28-09, 01:14 PM #51
- Join Date
- May 2005
Definitely a slick case you've built, best of luck in the contest!
I'm a big fan of the component layout you've got going on there. I've always wanted a case with the [at least optical] drives where you've placed the card reader and your optical. Big from me!Sunbeam Transformer Full Tower
GA-EP45-UD3P, Q9400 R0 -> 3.6ghz
2x2Gb G. Skill 1066, Kingwin RVT 12025
Sapphire HD4870 1Gb, Vista Home Premium x64
Acer AL2216W, Acer X203W
ASUS Eee PC 1001PX-EU17-BK
Xbox 360 60Gb
XBL! Gamertag - pejsaboy
Sanyo 46" 1080p
11-28-09, 09:19 PM #52
11-29-09, 11:07 PM #53
# Update 11-30-2009
Just a Small Final Video of Completed Project
The Sled Acrylic Tech Bench
Hope you all Enjoy!!
01-08-10, 03:32 AM #54
You should send pictures to MaximumPC. While they stopped monthly contest for flashy cases, they could publish your case in a future issue and maybe send you some sweet awards as well.space for rent
01-24-10, 02:34 AM #55
Hey JS...really nice work there!
How is it holding up in the dust collection dept? That was always my concern with plexi projectsTHE POST COUNTER IS NOT AN INTELLIGENCE METER!
Heat My HWBOT Profile
MAX11Lv3 - "It kind of reminds me of going to the circus and seeing a mini drive around and then 83 clowns jump out of it!" - ollien33
01-24-10, 04:13 AM #56
holding up pretty good, dust wise , it actually setup now in Living room and connected to our New LG32 LCD-HDTV using for Folding and Home Theatre PC Duties with Win7 installed.
02-02-10, 10:05 AM #57
Nice build and log! Did you consider getting the piano hinge chromed or getting a chrome one? The gold don't seem to mesh with the clear and blue that well.Using Ubuntu does not make you good with linux.
02-02-10, 01:13 PM #58
yeah I did originally look for Chrome Piano Hinge, but there were none to be found around where I live in the country, and seeing I dont have transport and nearest main town is 150-170klm away I just had to settle for the Brass one, and that was the only one in stock too.
12-14-11, 05:11 PM #59
verry verry nice case js i love it!!i5 2500k (oc 4.5ghz)(watercooled) 55c load 24 idle,asus p8p67 delux,corsair gs 700,pny gtx560 (moded and watercooled),cooler master 912 haf x (custom window and 1x240 rad and 1x120 rad also changed leds in 200mm fan to blue(ek waterblocks cpu+gpu)