Page 1 of 2 1 2 LastLast
Results 1 to 20 of 22
  1. #1
    New Member
    Join Date
    Nov 2009
    Posts
    3

    Looking to make/purchase a compact PC, need advice

    Hello.

    I want to make a compact PC, but I'm not sure whether I should buy the preconfigured vendor PCs or make a custom one. As I understand it, making custom PCs is cheaper, but the setup I have in mind is to make a PC that is small in size (perhaps similar in size to the Mac mini). Does that mean I have to buy specialized PC components that are more expensive to their regular-sized counterparts? If that is so, from a convenience standpoint, are the vendor configured PCs made by HP a viable option?

  2. #2
    MARCI's Avatar
    Join Date
    Jun 2008
    Location
    Folding for T32 in Lawrenceville, Ga
    Posts
    1,632
    Look at Newegg. you can get mini and micro ATX boards and cases there. not really priced too diferently than full sized items.

    You could even start playing around with some of the miniITX form factor stuff.

    Small Form Factor just takes planning. since you still need air movement through the case.

    I guess it depends on what you want it to do.
    My Heat
    C2D E8400 @3.6 1.184vCore
    GIGABYTE EP45-DS3L
    8 GB G.SKILL PC8500
    MSI GTX260 (216) OC 896MB folding 24/7
    CORSAIR CMPSU-1000HX
    Folding User Stats

  3. #3
    New Member
    Join Date
    Nov 2009
    Posts
    3
    Thanks for the suggestion. It seems that the Micro sized casing is a good choice for the system I have in mind. This is the one I am looking at:

    http://www.newegg.com/Product/Produc...82E16811154094

    I don't suppose I could simply take out components from my current system (such as hard disk, motherboard etc.) and outfit the new casing with it?

    Since you mention it, does special consideration need to be given to air flow in these systems? I don't intend to make a gaming rig out of the system, infact my purpose of making a compact system is to design a system that is primarily used for work, emulation and multimedia - none of which should need expensive components AFAIK.

  4. #4
    Member jmdixon85's Avatar
    Join Date
    Oct 2008
    Location
    Cumbria (UK)
    Posts
    2,734
    We will need to know what kind of mainboard you have to see if it will fit the mATX case. The case you are looking at will take your current hard disk and DVD drive. As for cooling, the case already seems to have a 90mm exhaust fan and space for a 120mm intake fan that you would need to buy seperately. Apart from that just take care with cable management to get the best cooling. Can be a bit of a pain in such a small case but you should still be able to get good results.
    Main System/File Server/Secondary System/IP-Fire Router
    CPU: I2500K @ 4.7Ghz (H2o cooled)//AMD Athlon 215 x2/Q6600 @ 3.5Ghz/Celeron 1.1Ghz
    Mainboard: AsRock Z77 Extreme 4/Gigabyte 78LMT-USB3/Gigabyte P35-DS3P/Gigabyte GA-C847N
    RAM: 8GB DDR3 1600Mhz/8GB DDR3 1333Mhz/4GB DDR2 1066Mhz/2GB DDR2
    Video: 2x nVidia GTX470 sli/Radeon 3000/NVidia GTX460/iGPU
    HDD: 128GB SSD (System)/WD VR 300GB(Games)/ 80GB HDD (TV Recordings)/WD VRaptor 160GB (Sytem), Maxtor 80GB (Sys Backup), 5x 1TB (RAID5 Data)/3TB (Backup) HighpointRR 3520 RAID Card/VR 160GB (system) 1TB (Data)/160GB
    PSU: Corsair TX-M 750W/Enermax 495W/FSP 800W/FSP 300W
    Case: Coolermaster HAF932/CM Cosmos S/Cosmos 1000
    Audio: Toslink -> Pioneer VSX-820-K (Dolby TrueHD/DTS Master Audio)/Logitech X-530
    i7/i5/i3 Overclocking Guide/Intel Core2 overclocking guide/AMD AM2 overclocking Guide

  5. #5
    MARCI's Avatar
    Join Date
    Jun 2008
    Location
    Folding for T32 in Lawrenceville, Ga
    Posts
    1,632
    Aye, you can use the same cpu, hard drive, ram, dvd drive. The Mobo would need to fit the case. mATX case needs a mATX or smaller mobo.

    Add on graphics cards can be tricky, depending on the height, and length of the card.

    I'd recommend a Modular PSU for ease of installation.
    My Heat
    C2D E8400 @3.6 1.184vCore
    GIGABYTE EP45-DS3L
    8 GB G.SKILL PC8500
    MSI GTX260 (216) OC 896MB folding 24/7
    CORSAIR CMPSU-1000HX
    Folding User Stats

  6. #6
    Hates Trashcans
    LOVES GRAMMER
    Theocnoob's Avatar
    Join Date
    Dec 2007
    Location
    Canada. Eh?
    Posts
    9,499
    Zotac Ion 330 (sorry lost link)
    ITX Mobo with integrated Atom 330 dual core CPU and Nvidia Ion (Gforce9300?M)

    $209

    http://www.newegg.ca/Product/Product...82E16820144071
    2x1GB DDR800 Geil

    $47 -- you didn't mention anything that'd require 4GB.

    Beyond that pick a mini ITX case you like, a 2.5" hard drive, and an optical drive

  7. #7
    Member jmdixon85's Avatar
    Join Date
    Oct 2008
    Location
    Cumbria (UK)
    Posts
    2,734
    ^^Very good advice their if you want to go ultra-small. +1
    Main System/File Server/Secondary System/IP-Fire Router
    CPU: I2500K @ 4.7Ghz (H2o cooled)//AMD Athlon 215 x2/Q6600 @ 3.5Ghz/Celeron 1.1Ghz
    Mainboard: AsRock Z77 Extreme 4/Gigabyte 78LMT-USB3/Gigabyte P35-DS3P/Gigabyte GA-C847N
    RAM: 8GB DDR3 1600Mhz/8GB DDR3 1333Mhz/4GB DDR2 1066Mhz/2GB DDR2
    Video: 2x nVidia GTX470 sli/Radeon 3000/NVidia GTX460/iGPU
    HDD: 128GB SSD (System)/WD VR 300GB(Games)/ 80GB HDD (TV Recordings)/WD VRaptor 160GB (Sytem), Maxtor 80GB (Sys Backup), 5x 1TB (RAID5 Data)/3TB (Backup) HighpointRR 3520 RAID Card/VR 160GB (system) 1TB (Data)/160GB
    PSU: Corsair TX-M 750W/Enermax 495W/FSP 800W/FSP 300W
    Case: Coolermaster HAF932/CM Cosmos S/Cosmos 1000
    Audio: Toslink -> Pioneer VSX-820-K (Dolby TrueHD/DTS Master Audio)/Logitech X-530
    i7/i5/i3 Overclocking Guide/Intel Core2 overclocking guide/AMD AM2 overclocking Guide

  8. #8
    Underwater Senior Member
    Join Date
    Nov 2001
    Posts
    6,397
    I've grown to love my little Intel mITX board (in my signature).
    Plenty of power running the E8400 Dual Core, and I understand BIOS updates have brought it up to 8Gig of ram capacity (64 bit OS needed, I now run Win7 Pro X64 without issue). It can run the 64 watt quads too.
    Video does nicely, playing vids from online, hard drive/jump drive/DVD's without a hitch. It's also got dual head video, having both DVI-I and DVI-D outputs.
    Sound is fantastic, which is unexpected in an office targeted machine too.

    I now have it outfitted with a Sata Sony Optiarc DL laptop DVD burner and two Seagate Sata II 320Gig 2.5" drives (no raid, though it does come with it).

    I went with Intel because I was tired of fussing around with drivers and support, Intel had Win 7 drivers up when the first Beta's of Win7 released. Windows Update even pulled a video driver that Intel hadn't posted yet!

    I have not been able to get a response from ATI/AMD/Diamond about my TV tuner card not working, but I totally forgot who owned ATI these days...duh, my bad. Hauppauge is my next try, because saving a dime did not come out in my favor.

    The case I use now is the In-Win CS-BM639.AD120SL. Not bad, though I'm thinking of replacing the PSU it came with with my Pico PSU 150 watter...it totally kills the room in the case, and makes cables hard to run.
    Bring only half-height cards to play in whatever slot you end up with, because that's all it will take.
    I have a Scythe drive bracket set that allows me to use the single 3.5 drive bay for my two 2.5 drives.


    Not trying to be a salesman or anything, but there's a bit of comfort to offer in a tested system that's been running for 7+ months.
    *And please pardon my manners... to the forums!
    Last edited by Diggrr; 11-05-09 at 01:07 AM.

  9. #9
    Hates Trashcans
    LOVES GRAMMER
    Theocnoob's Avatar
    Join Date
    Dec 2007
    Location
    Canada. Eh?
    Posts
    9,499
    Quote Originally Posted by Diggrr View Post
    I've grown to love my little Intel mITX board (in my signature).
    Plenty of power running the E8400 Dual Core, and I understand BIOS updates have brought it up to 8Gig of ram capacity (64 bit OS needed, I now run Win7 Pro X64 without issue). It can run the 64 watt quads too.
    Video does nicely, playing vids from online, hard drive/jump drive/DVD's without a hitch. It's also got dual head video, having both DVI-I and DVI-D outputs.
    Sound is fantastic, which is unexpected in an office targeted machine too.

    I now have it outfitted with a Sata Sony Optiarc DL laptop DVD burner and two Seagate Sata II 320Gig 2.5" drives (no raid, though it does come with it).

    I went with Intel because I was tired of fussing around with drivers and support, Intel had Win 7 drivers up when the first Beta's of Win7 released.

    I have not been able to get a response from ATI/AMD/Diamond about my TV tuner card not working, but I totally forgot who owned ATI these days...duh, my bad. Hauppauge is my next try, because saving a dime did not come out in my favor.

    The case I use now is the In-Win CS-BM639.AD120SL. Not bad, though I'm thinking of replacing the PSU it came with with my Pico PSU 150 watter...it totally kills the room in the case, and makes cables hard to run.
    Bring only half-height cards to play in whatever slot you end up with, because that's all it will take.
    I have a Scythe drive bracket set that allows me to use the single 3.5 drive bay for my two 2.5 drives.


    Not trying to be a salesman or anything, but there's a bit of comfort to offer in a tested system that's been running for 7+ months.
    OP don't know your knowledge level but ^ system would obliterate the one I suggested (think Star Wars (the first one) where Darth Vader's ship is chasing the little beat up junker with princess Leia)

    It'll just cost you a lot more-- but it'll fit into the same footprint.

    You can actually make a really powerful system and fit it in something with dimensions smaller than a PS3 slim

    It's just a matter of- do you want 'good enough for what I want to do' or do you want the possibility of this system growing, gaming, etc..

    If not the Atom 330 build is really really really really power efficient and it's cheap and you get a relatively good CPU and GPU on a relatively good board. None of it's great- by any means. It's just 'good enough'.
    But it's good enough for BLU-RAY play back, very light gaming- like WoW on lower settings, stuff like that.

    In being integrated, it also offers the advantage of being a much quicker power free build-- you just screw the mobo in, connect the drives and power supply cables and turn it on.

    Not trying to knock the above build-- its what I'd aim for if I made a tiny PC like this-- I want more power always-- but I am not who this unit is for.

  10. #10
    Underwater Senior Member
    Join Date
    Nov 2001
    Posts
    6,397
    Very true, I still love my Jetway system that's also in my sig. It ran all my 32 bit software too!
    The 120 watt PSU was actually overkill because I ran full sized drives when I first put it together...no worries leaving it on all day either, because it used so little power.

    It has an advantage over the bigger system, in that the low profile of the tiny heatsink made it capable of a 1U case with low-height ram.
    Last edited by Diggrr; 11-05-09 at 01:22 AM.

  11. #11
    Member jmdixon85's Avatar
    Join Date
    Oct 2008
    Location
    Cumbria (UK)
    Posts
    2,734
    you got a pic of that little jetway rig?
    Main System/File Server/Secondary System/IP-Fire Router
    CPU: I2500K @ 4.7Ghz (H2o cooled)//AMD Athlon 215 x2/Q6600 @ 3.5Ghz/Celeron 1.1Ghz
    Mainboard: AsRock Z77 Extreme 4/Gigabyte 78LMT-USB3/Gigabyte P35-DS3P/Gigabyte GA-C847N
    RAM: 8GB DDR3 1600Mhz/8GB DDR3 1333Mhz/4GB DDR2 1066Mhz/2GB DDR2
    Video: 2x nVidia GTX470 sli/Radeon 3000/NVidia GTX460/iGPU
    HDD: 128GB SSD (System)/WD VR 300GB(Games)/ 80GB HDD (TV Recordings)/WD VRaptor 160GB (Sytem), Maxtor 80GB (Sys Backup), 5x 1TB (RAID5 Data)/3TB (Backup) HighpointRR 3520 RAID Card/VR 160GB (system) 1TB (Data)/160GB
    PSU: Corsair TX-M 750W/Enermax 495W/FSP 800W/FSP 300W
    Case: Coolermaster HAF932/CM Cosmos S/Cosmos 1000
    Audio: Toslink -> Pioneer VSX-820-K (Dolby TrueHD/DTS Master Audio)/Logitech X-530
    i7/i5/i3 Overclocking Guide/Intel Core2 overclocking guide/AMD AM2 overclocking Guide

  12. #12
    New Member
    Join Date
    Nov 2009
    Location
    NH
    Posts
    5
    I built a shuttle that’s almost as fast as my full size gamming rig.
    Shuttle case:
    http://www.cyberguys.com/product-det...roductid=26718
    This case will hold a full size video card and even comes with an extender so you can put a large power supply in…..you can google any of the parts Specs:
    Corsair HX 1,000 watt,
    Phenom II x4 940 3ghz,
    ASROCK A780BMX/128M
    8gig Kingston HyperX KHX8500D2T
    Freezer 64 Pro cooler,
    Sapphire 4890 2GB GDDR5
    320 gig sata drive
    ROGUE NZXT Shuttle Case,
    Dell SP2309w 23” wide screen 80,000 to 1 contrast ratio 2048x1152
    Vista 64bit ultimate….

  13. #13
    Underwater Senior Member
    Join Date
    Nov 2001
    Posts
    6,397
    Quote Originally Posted by jmdixon85 View Post
    you got a pic of that little jetway rig?
    Not at the moment, it's torn down right now to put into the case I took this one out of. I'll search around and see if the old thread hasn't gone to the archives as yet, I started a thread with a custom case build.

    *sorry, the forum monster got the thread. Strange how the case I built before it can still be found....
    Last edited by Diggrr; 11-05-09 at 11:49 AM.

  14. #14
    New Member
    Join Date
    Nov 2009
    Posts
    3
    Thanks for all your suggestions. I have a much clearer idea of what I want now. This is the case I have in mind for the new system:

    mini ITX case

    and the Zotac Ion 330 motherboard.

    I hope that the small size of the mini ITX won't prove too prohibitive. I may plan to upgrade to a high-quality sound card and another hard drive down the road - will this casing provide enough space for that? Also, since the mini ITX uses smaller hard disks, how can I transfer data over from my 3.5" hard disk which I currently use?

    Thankyou for all your assistance.

  15. #15
    Member Neuromancer's Avatar
    Join Date
    Oct 2005
    Location
    Tau'ri
    Posts
    8,159
    btw there is p55 based itx system out that will crush all the others in this thread combined

    http://www.techreaction.net/forums/s...ead.php?t=1212
    All rants I produce are sole property of 127.0.0.1.
    10 types of people understand binary.
    Suck iiiiiitttttttttt. -Shawn Spencer
    Linux is the stepchild of the OS world. "You told me to set 192.168.0.266 ip address", okay >>>Kernel PANIC - Me

  16. #16
    New Member
    Join Date
    Nov 2009
    Location
    NH
    Posts
    5
    loonytoony,,,
    You can always take all the files that you want to save and put them in a separate directory in the same drive before removing it. Then put it in your new system as a slave drive and retrieve the info from it and just take it out when done. The reason I say to take the files you need to save and place them in a different directory is that sometimes when you take a drive out of a pc and place it in another, the files that are saved in the documents and settings folder/user name/ my documents are not accessible anymore. These files can be made accessible with a little bit of know how but, its a lot less frustrating just to place them in their own directory before removing the drive! Also I dont think your gonna have enough room with that case! but thats your call....cheers

  17. #17
    Underwater Senior Member
    Join Date
    Nov 2001
    Posts
    6,397
    ITX can use the full sized drives too, the interface on the board is the same as it's full sized counterparts.
    That particular case has room for a laptop CD/DVD drive (slim, make sure you get the correct type of cable for it, board end is the same, but the drive end may be different like "slim sata").
    It also takes a full sized 3.5" hard drive, so no worries about transferring data.

    It says in the specs that it has an expansion slot, but the pictures do not show one...you may have a problem adding a sound card with that case unless the pics are of an older model.

  18. #18
    MARCI's Avatar
    Join Date
    Jun 2008
    Location
    Folding for T32 in Lawrenceville, Ga
    Posts
    1,632
    Regardless, It sounds like alot of fun is going to be coming your way, and I look forward to your build logs.
    My Heat
    C2D E8400 @3.6 1.184vCore
    GIGABYTE EP45-DS3L
    8 GB G.SKILL PC8500
    MSI GTX260 (216) OC 896MB folding 24/7
    CORSAIR CMPSU-1000HX
    Folding User Stats

  19. #19
    Member jmdixon85's Avatar
    Join Date
    Oct 2008
    Location
    Cumbria (UK)
    Posts
    2,734
    I too look foward to it. When ITX first came out I was going to convert an old DVD player into a full PC. Never got round to it though
    Main System/File Server/Secondary System/IP-Fire Router
    CPU: I2500K @ 4.7Ghz (H2o cooled)//AMD Athlon 215 x2/Q6600 @ 3.5Ghz/Celeron 1.1Ghz
    Mainboard: AsRock Z77 Extreme 4/Gigabyte 78LMT-USB3/Gigabyte P35-DS3P/Gigabyte GA-C847N
    RAM: 8GB DDR3 1600Mhz/8GB DDR3 1333Mhz/4GB DDR2 1066Mhz/2GB DDR2
    Video: 2x nVidia GTX470 sli/Radeon 3000/NVidia GTX460/iGPU
    HDD: 128GB SSD (System)/WD VR 300GB(Games)/ 80GB HDD (TV Recordings)/WD VRaptor 160GB (Sytem), Maxtor 80GB (Sys Backup), 5x 1TB (RAID5 Data)/3TB (Backup) HighpointRR 3520 RAID Card/VR 160GB (system) 1TB (Data)/160GB
    PSU: Corsair TX-M 750W/Enermax 495W/FSP 800W/FSP 300W
    Case: Coolermaster HAF932/CM Cosmos S/Cosmos 1000
    Audio: Toslink -> Pioneer VSX-820-K (Dolby TrueHD/DTS Master Audio)/Logitech X-530
    i7/i5/i3 Overclocking Guide/Intel Core2 overclocking guide/AMD AM2 overclocking Guide

  20. #20
    Member necrokiller's Avatar
    Join Date
    Apr 2008
    Location
    Toronto, Canada
    Posts
    950
    Guys, loonytoony is my younger brother. So I'll be putting up this rig for him now.

    What do you guys think about this combo: http://ncix.com/products/?sku=42120&...Bundle%20Deals

    I particularly like the motherboard since it also has wi-fi on-board. Hows the casing to work with with regards to cable management and holding atleast one 3.25" HDD? Seems a little too expensive. Are there any better mini-ITX motherboards which support LGA 775 in the same price range? Or has an expansion slot to take the D-link DWA-552 ?

    I can use some DDR2-667 RAMs and HDD from the current rig...(and maybe the ATX PSU if the casing supports it (I saw a Lian-Li PC-Q07 casing which does). Budget is about $400. Purpose of the rig is to just do the basic tasks, browsing, word processing, emulation and HD movies playback. According to some reviews I read, even the single core variants of the Atom cpu on the Zotac motherboards can handle 1080p movie playback.

    The Gateway SX2800 seemed very appealing to me as well. Its a little over the budget but we get a bigger hard-disk, more RAM, faster CPU and a monitor +mouse +keyboard as well all in a very compact design. So which do you guys think is the best option?
    Processor | Intel C2D E8400 C0 @ 4GHz Xigmatek Dark Knight
    Motherboard | eVGA 680i SLI
    RAM | OCZ XTC Platinum 2x1GB DDR2 1066MHz PC-8500
    Graphics | EVGA GTX 260 (192sp)
    Storage | Western Digital 320GB SATA
    Case - Power Supply |CM 690 - Corsair TX750
    Operating System | Windows 7 (32-bit)

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •