Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Nov 2009

    1920x1080 question (HDMI)

    I Finally got my system up and running, thanks to everyone.. being thiddy jaxx. i just finished installing the software for my 5770 and am now on an hdmi cable. at max resolution.. but it doesnt fit my screen? its a been smaller then my 23.6" lcd monitor... whats my problem?. did it downsize from dvi cause i am now on an hdmi cable?..

    CASE... CoolerMaster HAF 922
    PSU... OCZ Fatal1ty 550w
    CPU...PhenomII X4 965 BE 125w :)
    RAM...8 GB Corsair XMS3 DHX O.C. 1600
    MOBO... Asus M4A78T-E
    GPU... HD Sapphire 5770 1GB (DX11)
    HDD... 2x TB Barracudas
    OS... Windows 7 Professional 64bit
    Display... 23.6" Asus 1080p LCD
    -note ZERO overclockin performed.

  2. #2
    Member Randyman...'s Avatar
    Join Date
    May 2004
    Location
    Houston, TX
    Go into the CCC, select your Monitor Properties, and look for the "Zoom/Overscan" tab (I think that is what it is labeled as). Set the "Overscan" to "0". Viola! This drove me uts as well

    Randy V - Audio-Dude/Musician/PC Guru/Crazy Guy

    PC#1 (Main Rig) : Lian Li PC-V1010 / P8Z68-V-GEN3 / 3750K @ 4.5GHz + Ven-X / 16GB G.Skill DDR3-1600 / HD5770 "XXX" 1GB / Samsung 830 256GB SSD / (6x) 2TB 5K3000 on Areca ARC1222 in RAID-6 / Seasonic X660 PSU / 2407WFP-HC / RME "Multiface" 38 Ch. Audio I/O / Dynaudio AIR-15 + AIR-BASE-2 Studio Monitors
    PC#2 (Realtime DAW) : Lian-Li PC-K65B / Sabertooth X79 / i7-3820 @ 4.8GHz + TRUE / 8GB RipJaws DDR3-2133 / HD6570 / 120GB Intel 520 / 4x 1TB on Areca ARC-1210 in RAID-5 / RME "HDSPe MADI" 128 Channel Audio I/O / 2x SSL AlphaLink MADI AX / 48 Mic Inputs + Fully-discrete Mic Preamps + 4260Watt PA System with 5x 18" JBL Subs :-)
    NAS#1: NSC-800 ITX Case / Asus P8H61-ITX / i3-2120 / (8x) 1TB 7200.12's in RAID-6 on Areca ARC-1220 Card
    NAS#2: 12TB ReadyNAS Ultra-4+ / (4x) 3TB 5K3000's
    And 7 other i7/i5/C2D/C2Q PC's

  3. #3
    Registered
    Join Date
    Nov 2009
    Quote Originally Posted by Randyman... View Post
    Go into the CCC, select your Monitor Properties, and look for the "Zoom/Overscan" tab (I think that is what it is labeled as). Set the "Overscan" to "0". Viola! This drove me uts as well

    thankyou very much sir. just stepped in from dinner, going to check it out now.. thanks again.. this is my first build since i was 14 years old... 6 years ago.. never had to deal with this extremely new world of hardware and lcd and all that ish thanks again


    it worked perfectly. thanks again sir.

    CASE... CoolerMaster HAF 922
    PSU... OCZ Fatal1ty 550w
    CPU...PhenomII X4 965 BE 125w :)
    RAM...8 GB Corsair XMS3 DHX O.C. 1600
    MOBO... Asus M4A78T-E
    GPU... HD Sapphire 5770 1GB (DX11)
    HDD... 2x TB Barracudas
    OS... Windows 7 Professional 64bit
    Display... 23.6" Asus 1080p LCD
    -note ZERO overclockin performed.

  4. #4
    Member Randyman...'s Avatar
    Join Date
    May 2004
    Location
    Houston, TX
    No problem, Muchacho

    You will likely have to reset this anytime you update your drivers, too...

    Enjoy!
    Randy V - Audio-Dude/Musician/PC Guru/Crazy Guy

    PC#1 (Main Rig) : Lian Li PC-V1010 / P8Z68-V-GEN3 / 3750K @ 4.5GHz + Ven-X / 16GB G.Skill DDR3-1600 / HD5770 "XXX" 1GB / Samsung 830 256GB SSD / (6x) 2TB 5K3000 on Areca ARC1222 in RAID-6 / Seasonic X660 PSU / 2407WFP-HC / RME "Multiface" 38 Ch. Audio I/O / Dynaudio AIR-15 + AIR-BASE-2 Studio Monitors
    PC#2 (Realtime DAW) : Lian-Li PC-K65B / Sabertooth X79 / i7-3820 @ 4.8GHz + TRUE / 8GB RipJaws DDR3-2133 / HD6570 / 120GB Intel 520 / 4x 1TB on Areca ARC-1210 in RAID-5 / RME "HDSPe MADI" 128 Channel Audio I/O / 2x SSL AlphaLink MADI AX / 48 Mic Inputs + Fully-discrete Mic Preamps + 4260Watt PA System with 5x 18" JBL Subs :-)
    NAS#1: NSC-800 ITX Case / Asus P8H61-ITX / i3-2120 / (8x) 1TB 7200.12's in RAID-6 on Areca ARC-1220 Card
    NAS#2: 12TB ReadyNAS Ultra-4+ / (4x) 3TB 5K3000's
    And 7 other i7/i5/C2D/C2Q PC's

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •