I have 3 24" monitors (2 gateways & 1 acer). 2 of them are plugged into the GC with dvi connectors and the other is plugged in using an apple minidisplay port to dvi active adapter. The issue I'm encountering is that for some reason both CCC & W7 are having trouble recognizing the monitor that is plugged into the adapter (tried all three with same result) and its showing up as "non Plug and play generic monitor". Because of this it will not allow my eyefinity group (or that individual monitor) to achieve its native resolution of 5760X1200 & 1920X1200 respectively. The perplexing thing is that when I initially installed everything it worked perfectly and defaulted immediately to 5760X1200 and recognized each display. Then after I attempted to play with some settings, the system crashed and now I'm unable to achieve any resolution greater than 4800X1200 and 2/3 of the monitors will not run at their native resolutions. I'm not sure if this is a driver issue, hardware issue, or some combination of the two. I'm running windows 7 64 professional btw. If anyone could help, it would be greatly appreciated.