- Joined
- Feb 3, 2005
I built a pc for a friend but I am having trouble with stability. Here are the specs:
Phenom II 955
Gigabyte GA-MA790FXT-UD5P
4GB OCZ DDR3 PC3-12800 / 1600MHz Platinum Edition
Gigabyte GeForece GTX260-216
Corsair 650W PSU
Arctic Cooling Freezer 7 Pro
Windows XP x64
When I run Linpack in OCCT or folding on the cpu the pc completely locks up and I have to hit the reset button. I've tried setting everything to manual and increasinc some of the voltages a little but no joy. Heres what I have a the moment:
I had a look at Dolks guide but I got confused. Any help would be greaty appriated.
Phenom II 955
Gigabyte GA-MA790FXT-UD5P
4GB OCZ DDR3 PC3-12800 / 1600MHz Platinum Edition
Gigabyte GeForece GTX260-216
Corsair 650W PSU
Arctic Cooling Freezer 7 Pro
Windows XP x64
When I run Linpack in OCCT or folding on the cpu the pc completely locks up and I have to hit the reset button. I've tried setting everything to manual and increasinc some of the voltages a little but no joy. Heres what I have a the moment:
Code:
CPU Clock Ratio x16 ->3200MHz
CPU NorthBridge Freq. x10 ->2000MHz
CPU Frequency(MHz) 200
PCIE Clock 100
HT Link Width 16 bit
HT Link Frequency x10 ->2000MHz
Memory Clock x8.00 1600MHz
DDR3 Voltage Control +0.200V ->1.8V
SB/HT VoltagControl Normal
NB/PCIe/Pll Voltage Control Normal
CPU PLL Voltage Control 2.500V
DDR VTT Voltage Control Normal ->0.800V
NB Voltage Control 1.120V
CPU NB VID Control +0.150 1.2500V
CPU Voltage Control Normal
I had a look at Dolks guide but I got confused. Any help would be greaty appriated.
Last edited: