• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

What Pump is Better

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
I think i might just get one of these.
The PMP-400 is a high-pressure pump with a very low profile format. It is used in multiple Koolance systems, such as the PC4-1000, RP-1000, and TNK-400 products.

* Maximum Flow Rate: 8.7 L/min (2.3 gal/min)
* Maximum Head Pressure: 7m (23ft)
* Motor: Brushless DC, electronically commutated, spherical motor
* Expected Lifetime: 50,000 hrs. MTBF (5.7 years)
* Power Consumption (at max): 20W
* Voltage Range: 8 to 13.2 VDC
* Startup Voltage: 9 to 13.2 VDC
* Maximum System Pressure: 1.5 kgf/cm2 (22 PSI)
* Maximum Temperature: 60°C (140°F)
* Electrical Connector: 3-pin fan header with tachometer speed signal
* Hose Connections: 10mm (3/8") ID hose barbs
* Weight: 198g (7oz)
Swiftech MCP355™ 12 VDC Pump
Technical specifications
Nominal voltage 12 V DC
Operating voltage range 8 to 13.2 VDC
Minimum starting Voltage 9 VDC
Nominal power (@ 12 V) 18 W
Nominal current (@ 12 V) 1.46 amps
Nominal head (@ 12 V) 20.2 ft (6.1 m)
Nominal discharge (@ 12 V) ~ 120 GPH (454 LPH)
Connection size 3/8" barbs (10mm)
Maximum pressure 22 PSI (1.5 BAR)
Temperature range Up to 140°F (60°C)
Electrical connector Molex 4 pin
Weight 7.3 oz (207 gr.)
Our noise measurement (non lab environment) 30 ~ 32 dBA in a quiet room @ 2'
Motor type Electronically commutated, brushless DC, spherical motor
Pump MTBF (Mean Time Between Failures) 50,000 Hours
RPM Sensor 3 pin connector
 
you split the flow before the block and video and then rejoin them. a bit more tubing that way and uneven flow . you might want to get some extra hose and do a comparison by routing the flow to cpu then to video then to rad all in series and see which performance you like better
 
Back