Page 1 of 4 1 2 ... LastLast
Results 1 to 20 of 78

Thread: "MAX11L"

  1. #1
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile

    "MAX11L"

    OK, I'm not an expert modder like my teammate TiTON, but I thought I'd try my hand at a pretty easy project to dive into this world of modding. So this will be the first project log that I'm taking pretty seriously: MAX11L

    "MAX11L" stands for maximum performance in less than 11 liters of space. I started off with a basic air cooled project which you may have seen posted at overclockers.com.
    http://www.overclockers.com/gaming-t...paces-miniitx/





    At heart I'm an overclocker, not a modder. So performance takes #1 priority with all my systems, and this one will be no exception. I still have not decided whether or not I'm going to use Lynnfield or Clardale. But one of the first changes needed was better cooling, so I'm switching to water cooling thanks to Corsair and the new H70. Here is the rest of the parts list.

    Getting ready for the next upgrade. Playing around with some modling to verify my measurements. Looks like everything is going to fit perfect

    case - Silverstone SUGO SG05 (interior will be painted)
    PSU - Silverstone 450W SFX (all cables will be custom sized and sleeved)
    mobo - Gigabyte H55N-USB3 (Thank you Gigabyte Japan!)
    CPU - Intel i5 750 @ 4.2GHz or i5 670 @ 4.8GHz (I'll test for performance)
    CPU cooling - Corsair H70 with one 120x38mm 150CFM Delta (Thank you Corsair!)
    memory - 2x2GB Corsair Dominator GTX3 (Thank you Corsair!)
    graphics card - Gigabyte 5870 SOC (Thank you Gigabyte Japan!)
    OS storage - 80GB Intel X25M SSD (for Windows 7 Home Premium x64)
    games/media storage - 500GB Seagate Momentus XT hybrid drive (for games & media)

    Here is a 3D model I used to check for measurements (using Rhino 3D v1.0)













    Almost all the parts have arrived, and I've done the cutting mods on the case today for a test fitting.......EVERYTHING FIT

    :naughty: teaser :hip:


    As you can see I've had to rearrange things slightly compared with my renderings, but it looks like everything will work out OK like this.

    I'll be updating shortly with my progress on the modding. But for the full performance review, you'll have to wait for the final article which will be posted at techreaction.net in a few weeks.

    Any comments/criticizms are welcome and appreciated :thumb:

  2. #2
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile
    Cheers for all the comments so far guys

    If you haven't already seen the article I wrote about gaming in a small chassis, it'll give you a good idea of where I'm coming from...

    OK, so build log #1....

    So, first off knew based on my renderings that I would be loosing the stock optical/SSD/HDD mounting options due to the H70 location. The optical drive was not a problem for this build because I'm not using one....but that left the SSD and the 3.5" HDD I was using that needed a new home. I quickly realized that retaining the 3.5" drive in a build this small wouldn't be worth the effort, and I hadn't been happy with the performance of it anyhow. So I ordered one of the new 500GB Seagate Momentus XT drive to replace it. So with only 2 2.5" drives to mount, the task became much simpler. After surveying the build in 3D, I figured out that the PSU is the perfect dimensions for this Akasa SSD mounting kit


    First I cut a piece of spare aluminum....


    ....and lined it up with the chassis cross-brace.


    Then I rivited the two together.




    You can see here how the Akasa mount will attach.


    And here is the kit mounted (thumb-screws on the inside since it'll be difficult to access with a screwdriver after built.




    The opposite side mounts directly to the chassis.




    Seems like it was made to be like that


    It also seems that if I wanted to expand there's plenty of height there for a second mounted under the first.


    Looking at the front of the chassis....I knew the other mahor mod for this build would be getting the 5870 to fit. The interior length of the case is about 5mm shy...so......


    I had to make room. So, the video card stick through the front of the chassis.










    Prepping the mobo for the H70.


    Motherboard and H70 mounted....I'm currently testing with my i5 670. I'll swap for the i5 750 later to compare performance.




    Memory installed




  3. #3
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile



    Add the storage back into the mix.


    The SSD/HDD mount was slightly interfering with the H70 hoses....but a little tweaking was all that was necessary.








    OK, add in the PSU and graphics card and we're about finished......




    Hummm....I don't like the way that looks with the SATA data cable lengths....anyone know where I can get REALLY short ones? These are only 20cm....but still WAY TOO long.










    Tight fit for the H70 VS graphics card...it was making contact a littl....I'll have to do some simple insulation (tape or something).






    It's hard to see from this angle, but the front panel is bulging


    You can see it better from this bottom angle.


    Three causes....#1 above, fixed with Dremel.


    #2 & 3.........


    .....fixed with Dremel


    No more bulging



    OK, so that's it for now. Waiting on a few things....this first peicing together was to get the mods in place and make sure everything fit. Now I'm testing the see what this 670 can do with the H70. Within the next two weeks or so I'll be painting (first time for me via spray paint...any good guide out there?), and sleeving my cables (first time as well).

    I'm pretty excited and want this to be nice....I don't have the tools or experiance to make this thing look like a MDPC, but I am going for a little bling (also a first for me), so any suggestions are eagerly requested

  4. #4
    Jolly-Swagman's Avatar
    Join Date
    Sep 2007
    Location
    Folding@Home in Downunder Australia.Victoria
    Author Profile Folding Profile Heatware Profile
    Awesome MIAHALLEN, you certainly made use of every inch of space there was available in that case, well done bro, looking great!

  5. #5

  6. #6
    Member j0rd's Avatar
    Join Date
    Aug 2010
    Location
    Perth, Australia
    +1 this is one sw33t rig. About the only thing i would even concider would be cutting a window into the side closest to the graphics card and putting some mesh into it to help get cool air to the card, but thats just me.

    This has inspired my ideas for a mini itx htpc, thx
    J0rd_

    ‾pɹ0ɾ

  7. #7
    5up3r m0d3r4t0r
    Overclockers.com Editor

    MattNo5ss's Avatar
    Join Date
    Aug 2008
    Location
    AL
    Author Profile Benching Profile Heatware Profile
    Looks awesome!

    Is the rad fan in push? I was thinking maybe put the fan on the other side of the rad and push air through it, pulling air from outside the case.

    I like j0rd's idea too.
    i7 4770K | ASRock Z87M OC Formula | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | EVGA GTX780 SC ACX | ASUS Xonar Essence STX | 256GB OCZ Vertex 4 | SeaSonic SS-1000XP
    Pentium G3258 | ASUS Z87I-Deluxe | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | 5x2TB RAIDZ | Corsair CX430

    My Overclockers.com Articles | HWBot Profile | Heatware (101-0-0)

    Projects: Copper-Framed, MDF Station | PVC-Framed, MDF Station | Custom Cascade Cart/Case | Untitled TJ07 Build


  8. #8
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile
    When I get the new Delta, I'm going to try it in a pull posistion....moving the rad to the rear would make water tube routing a bit more difficult, but it might be possible....that was my original plan.

    I like j0rd's idea too

  9. #9
    5up3r m0d3r4t0r
    Overclockers.com Editor

    MattNo5ss's Avatar
    Join Date
    Aug 2008
    Location
    AL
    Author Profile Benching Profile Heatware Profile
    Those 120x38mm fans with big hubs are actually better in push based on some of skinnee's testing, not by a lot, just ~1C. That's why I suggested push from the other side of the radiator instead of pull from where the fan is now, plus you'd get the fresh air.

    You can only do what you can in such a tight space though.
    i7 4770K | ASRock Z87M OC Formula | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | EVGA GTX780 SC ACX | ASUS Xonar Essence STX | 256GB OCZ Vertex 4 | SeaSonic SS-1000XP
    Pentium G3258 | ASUS Z87I-Deluxe | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | 5x2TB RAIDZ | Corsair CX430

    My Overclockers.com Articles | HWBot Profile | Heatware (101-0-0)

    Projects: Copper-Framed, MDF Station | PVC-Framed, MDF Station | Custom Cascade Cart/Case | Untitled TJ07 Build


  10. #10
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile
    I'm not too worried about the airflow with the Delta that is coming



    http://www.performance-pcs.com/catal...ducts_id=26058

    120x120x38 mm
    151.85 CFM @ 3700 RPM
    53.0 dBA
    12.60 watts
    1.05 amps
    Maximum Air Pressure 14.50 mm HO
    12v DC
    PWM 4 pin connector

  11. #11
    5up3r m0d3r4t0r
    Overclockers.com Editor

    MattNo5ss's Avatar
    Join Date
    Aug 2008
    Location
    AL
    Author Profile Benching Profile Heatware Profile
    That's true. So you don't have the Delta yet... I was looking at the pic of the fan on your rad and I knew it looked a lot like my San Ace H101 fans. Is a San Ace on there now?
    i7 4770K | ASRock Z87M OC Formula | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | EVGA GTX780 SC ACX | ASUS Xonar Essence STX | 256GB OCZ Vertex 4 | SeaSonic SS-1000XP
    Pentium G3258 | ASUS Z87I-Deluxe | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | 5x2TB RAIDZ | Corsair CX430

    My Overclockers.com Articles | HWBot Profile | Heatware (101-0-0)

    Projects: Copper-Framed, MDF Station | PVC-Framed, MDF Station | Custom Cascade Cart/Case | Untitled TJ07 Build


  12. #12
    Super Moderator
    Audioaficionado's Avatar
    10 Year Badge
    Join Date
    Apr 2002
    Location
    Medford, Orygun
    Folding Profile Heatware Profile
    Subscribed
    .....................................My HeatwareMyFAH Stats
    .......................Folding is a marathon, not a sprint audioaficionado
    Asus Commando, 8GB GSkill 5-5-5-15-2t PC6400, Q6600 @3.0GHz >SMP2+GPU3 FAH 24/7
    Gigabyte DS3, 3GB GSkill 5-5-5-15-2t PC6400, E6400 @3.0GHz
    Asus P5Q PRO Turbo, 4GB GSkill 5-5-5-15-2t PC6400, E6600 @3.0GHz
    Iwill DH800, 2GB OCZ4002048PFDC-K 2.5-3-3-8-1t, Dual 2.4 M0 Xeons 1.5v/880/3300
    Help improve overclockers.com! Get involved!

    You have over 101 signatures and Can't see the classifieds???Click This Link
    Anyone we catch cookie stuffing at this site will be banned on the spot!!

  13. #13
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile
    Quote Originally Posted by MattNo5ss View Post
    That's true. So you don't have the Delta yet... I was looking at the pic of the fan on your rad and I knew it looked a lot like my San Ace H101 fans. Is a San Ace on there now?
    Yes

  14. #14
    Benchmarking Senior Member Deanzo's Avatar
    Join Date
    Feb 2005
    Location
    Christchurch, New Zealand
    Thats soo sick!
    My Heatware

    icebob: Do we have to flip the screen upside down to see you Dean!!!!

  15. #15

  16. #16
    Member Prunecandy's Avatar
    Join Date
    Mar 2010
    Location
    Cali
    looks great Miah
    CM silent pro 800w
    Cpu-Intel 3570k
    Heatsink- H220 Alive, but pump has air bubble even after bleeding
    mobo-Gigabyte ud4 z77
    Gpu-EVGA gtx 760
    hdd- Revodrive 2 220gb , samsung 840 120gb and WD Black 1 tb
    8gb gskill ripjaws DDR3 @2000mhz
    Case-NZXT Switch 810

  17. #17
    Senior Member
    MIAHALLEN's Avatar
    Join Date
    Aug 2007
    Location
    PNW
    Author Profile Benching Profile Folding Profile Heatware Profile
    OK, I've got a few updated today.

    I've decided to do one more part change. The 5870 still wasn't quite powerful enough for my tastes, so I swapped that for something a little more potent. I also sleeved most of my PSU wires and added heatsinks to the mobo VRMs.

    The stock PSU


    Opened up


    Step one was to create a secondary hole to pass the SATA power connectors through.


    Since both HDD & SSD are located directly below the PSU, this line was cut intentionally very short.


    Turned out pretty good.


    All the extra wires which will not be used in this build were cut short and tucked in safely.


    All remaining wires sleeved.


    Although not all individually.


    As you can see on the 24pin connection, only 1/2 of them are sleeved individually, I'll do the rest when I get more sleeve in


    Cleaned up the inside quite a bit though. Also, notice the SSD/HDD have been rotated 180 degrees


    I swapped the location of the rad & fan to attempt to improve cooling with a push setup











    Here is the new addition








    I also added an aluminum fan filter to assist with dust filteration





    Doing a little testing right now, and as expected I cannot stress test the CPU and GPU at the same time and stay within a safe power envelope. But I can run the GPU full boar with FurMark and it's only drawing about 505W at the wall, which is easily in the safe range. I also played Crysis Warhead for a few minutes and never saw it draw more than about 380W at the wall....so I should be perfectly fine with this setup

  18. #18
    5up3r m0d3r4t0r
    Overclockers.com Editor

    MattNo5ss's Avatar
    Join Date
    Aug 2008
    Location
    AL
    Author Profile Benching Profile Heatware Profile
    Nice! GTX480 in a miniITX build

    Do you have cool air getting to that beast GPU somehow? Also, you need to cover up that hub sticker
    i7 4770K | ASRock Z87M OC Formula | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | EVGA GTX780 SC ACX | ASUS Xonar Essence STX | 256GB OCZ Vertex 4 | SeaSonic SS-1000XP
    Pentium G3258 | ASUS Z87I-Deluxe | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | 5x2TB RAIDZ | Corsair CX430

    My Overclockers.com Articles | HWBot Profile | Heatware (101-0-0)

    Projects: Copper-Framed, MDF Station | PVC-Framed, MDF Station | Custom Cascade Cart/Case | Untitled TJ07 Build


  19. #19

  20. #20

    onefstsnake's Avatar
    Join Date
    Nov 2007
    Location
    Fburg, VA
    Thats going to be alot of power in a small package.
    Why not opt for a higher wattage PSU?
    "there was a puddle of water around the socket when I started." -I.M.O.G.
    Join the Benching Team
    Gaming/Benching/Folding Rig
    Asus Rampage III Formula**i7 950 @ 4.2ghz**6GB G.Skill Pi
    GTX470**2x1TB WD Black**256GB Samsung 830 SSD**Antec 1200w
    Wifes Gaming/Folding Rig
    Gigabyte GA-EX58A-UD3R**i7 920 @ 3.8ghz**6GB G.Skill Pi
    GTX260**2x1TB WD Black**640GB WD Black**Antec 750w

    MY HEAT

Page 1 of 4 1 2 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •