Results 1 to 3 of 3
  1. #1
    New Member Primetime1267's Avatar
    Join Date
    Oct 2010
    Location
    Sarasota, Florida

    New $9XX Gaming Rig Build Using The HAF 912 Case

    Hey guys..
    I have been building my own pc's for sometime but I have taken a few years off and finally gotten back into the gaming arena and wanted something a tad more robust than my current setup.
    So I set out to make my build somewhere in the $9XX dollar range and tried to make it a 2-3 yr bullet proof design. And I am sure I'll add some other gadgets to it as well like a possible fan controller... I'd like to hear some comments or suggestions.

    Ohh yeah.. The top left corner of the case did get damaged a bit while in transit via UPS. The Styrofoam was broken when I opened the box, ahhh crap, but I'm not waiting for a new one to get sent and just to have it happen all over again...

    *COOLER MASTER HAF 912 ( I was very close to painting the inside a satin black, but my side case will never be off anyhow..)
    *ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s USB 3.0 ATX AMD Motherboard
    *AMD Phenom II X4 955 Black Edition Deneb 3.2GHz
    *ARCTIC COOLING Freezer 7 Pro Rev.2 92mm Fluid Dynamic CPU Cooler
    *G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333
    *MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5
    *CORSAIR CMPSU-650TX 650W
    *ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner
    *APEVIA CF12SL-UBL 120mm Blue LED Case Fan (5)
    *WINDOWS 7 PREMIUM 7 FULL
    *Seagate 500GB 7200rpm HDD
    *And a small box of thumb screws to add to the HAF 912 case.

    Here are some pics of the progress so far, I should be buttoning everything up tomorrow afternoon if my little 9 month old allows me.













    --And with some of the internals in the case.. I just ran out of time tonight before I had to leave for work.









    Last edited by Primetime1267; 11-03-10 at 04:33 AM.

  2. #2
    Fronting as a Mod Member
    Seebs's Avatar
    Join Date
    Aug 2010
    Location
    Sunshine State
    Benching Profile Heatware Profile
    Nice and clean...
    Now you just need to take the whole thing apart and paint the inside of the HAF with a nice matte black paint for the ultimate look.
    Daily Driver: GA-890FXA-UD5 - Ph II X6 1090T - 16GB DDR3 1333MHz - MSI R9 280X Gaming Edition/HD 5670/HD6570 - Venomous X Black + G1238B12BBZP-00 - TX850V2 - CM 690 II Advanced
    Join the "Benching Team" - We have secret sauce! - OptyTrooper: GPUs are for burning not playing games anyway
    Kona on League of Legends: This game sits about as well with me as a gallon of prune juice does, and the results are just as nasty.
    I done got Pinked...

    Be sure to pre-tin everything (even soldered stuff!) with leaded solder. None of the RoHS junk. You want good old fashioned toxic heavy metals. ~ Bobnova

  3. #3
    Member Marshmallow64's Avatar
    Join Date
    Apr 2009
    Location
    California
    Nice work!
    :: Gaming Desktop ::
    CPU: AMD Phenom II X6 1055T @ 3.9 Ghz 1.4v | MOBO: MSI 790FX-GD70 AM3
    GPU: EVGA GeForce GTX 570 (732/1464/1900) | RAM: 4 GB G-Skill DDR3 1600
    SSD: OCZ Vertex 120 GB | HD1: WD Black 640 GB | HD2: WD Black 2 TB
    SC: Xfi Titanium Fatal1ty | PSU: Corsair HX 620 W
    KB: Saitek Eclipse | MOUSE: Logitech MX 518
    CASE: Antec 1200 | OS: Windows 7 x64
    :: Laptop ::
    MOD: Macbook Pro 13 2011 | CPU: Intel Core i5 @ 2.3 Ghz
    RAM: 4 GB DDR3 1333 | OS: OS X Lion 10.7.2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •