Page 1 of 10 1 2 ... LastLast
Results 1 to 20 of 187
  1. #1

    Beginner's Guide to Water Cooling Your PC *** READ THIS FIRST ***


    A guide to water cooling your computer from the ground up.
    ... Return to article to continue reading.

  2. #2
    Folding Team Content Editor
    Who Dolk'd my stars Senior Member
    deadlysyn's Avatar
    Join Date
    Mar 2005
    Location
    Stealing your megahurtz at night
    Author Profile
    Great write up, hokie.

    You forgot the LED stop fitting in the res trick to make them glow all nice and pretty too.
    Water and Air Cooling Lead Senior
    Folding for Team 32 as 8thDeadlySyn Folding in the memory of pscout
    I'm a Team 32 Folding Mentor. Ask me about Folding.
    Gigabyte GA-EP45-UD3LR, Q9550@3.5, 4 GB Corsair Dominator DDR2-1066, Corsair Force F60, 300 GB Maxtor SATAII, EVGA GTX460 v2
    Laing D5 Vario, D-Tek Fuzion V1, Swiftech MCW60, Swiftech MCRES V2, HWLabs BIX3, 3 Panaflo FBA12G12U's on Rheobus, Primochill LRT black, Antec 900

    Gigabyte GA-MA790FXT-UD5P, Athlon II X3 445, TRU120, 4 GB Kingston HyperX DDR3-1600, 8800GTS 320MB, 320 GB Maxtor Sata, SB Audigy SE
    HEAT - My Folding Stats
    Would you like to see your writing on the front page? Ask me how!

    Last edited by m0r7if3r on 1-23-2011 at 12:45 PM. Reason: I haz uber 1337 h4x0rz 5k1llz

  3. #3
    Disabled
    Join Date
    May 2006
    Location
    Anywhere but there
    Author Profile
    Excellent article!

  4. #4
    Member
    Water Cooling Sticky Reading Enforcement Official
    m0r7if3r's Avatar
    Join Date
    Jun 2010
    Location
    Marietta, GA
    Author Profile Heatware Profile
    long read, but a good one. Nice writeup.
    If years were seasons, this December would be the December of our December.
    -Abed #sixseasonsandamovie

    Heat

  5. #5
    Water Cooled Moderator
    Overclockers.com Lead Editor
    hokiealumnus's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh, NC
    Author Profile Benching Profile Heatware Profile
    Thanks a lot guys!

    To anyone that reads - I was serious about feedback too. If there are items of concern I'm happy to reexamine sections / add if necessary.

    If you're a new builder an have questions, we're here for you too! You can post quick questions here or start your own thread in the water cooling section. Just always remember - you never stop learning about this hobby. This covers most of the basics, but each build is unique to the builder and you need to research what works best for what you want out of water cooling.

    Enjoy benchmarks? Join the benching team!
    New to water cooling? Read the Beginner's Guide to Water Cooling Your PC.
    I.M.O.G. - "Night benching is the answer. Start sleeping every other day. Other than an occassional narcoleptic episode, its been wor"
    \m/ OverClockers mATX L33T Club \m/ - Join Now! - My mITX Build

  6. #6
    Member
    Water Cooling Sticky Reading Enforcement Official
    m0r7if3r's Avatar
    Join Date
    Jun 2010
    Location
    Marietta, GA
    Author Profile Heatware Profile
    Quote Originally Posted by hokiealumnus View Post
    To anyone that reads - I was serious about feedback too. If there are items of concern I'm happy to reexamine sections / add if necessary.
    Only thing that really stuck out in my mind was that you mentioned swiftech a lot when referencing products an had one dead link (the apogee XT testing). You also didn't mention the jingway pump series or talk about the benefits of single vs dual loops (though it was already a PRETTY long guide, so I'm not sure how much you could add)...but that's just me being overly critical.
    If years were seasons, this December would be the December of our December.
    -Abed #sixseasonsandamovie

    Heat

  7. #7
    Water Cooled Moderator
    Overclockers.com Lead Editor
    hokiealumnus's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh, NC
    Author Profile Benching Profile Heatware Profile
    Quote Originally Posted by m0r7if3r View Post
    Only thing that really stuck out in my mind was that you mentioned swiftech a lot when referencing products an had one dead link (the apogee XT testing). You also didn't mention the jingway pump series or talk about the benefits of single vs dual loops (though it was already a PRETTY long guide, so I'm not sure how much you could add)...but that's just me being overly critical.
    Thank you kindly for the feedback. Fixed the broken link.

    Re: Swiftech - It just happened to be the easiest place to grab product links when getting examples. That's about it.

    Re: Jingway - You're right, it didn't make the list. They seemed to be low cost alternatives to the superior DDC/D5 options (just looked at skinnee's testing from last year). There was mention of one of them as just that (low cost alternative) though - the D-Tek DB-1 is a Jingway rebrand AFAIK.

    Re: Single vs. dual - you're right, it's already pretty long. Heh, hopefully it's not a combination of long and boring.

    Being a basic guide, in most cases people will that go by it will want to start out on one loop. I did mention it, but only in passing because it seems that's more advanced than should be addressed in a beginner guide.

    Thank you again for the feedback!

    Enjoy benchmarks? Join the benching team!
    New to water cooling? Read the Beginner's Guide to Water Cooling Your PC.
    I.M.O.G. - "Night benching is the answer. Start sleeping every other day. Other than an occassional narcoleptic episode, its been wor"
    \m/ OverClockers mATX L33T Club \m/ - Join Now! - My mITX Build

  8. #8
    Excellent article dude with, all basic things that people need know for switch to WC.

    1- Can I suggest add some recommended fans that works in all radiators?, that can help a lot too.
    2- What about the maintenance period?

    As personal question, can you suggest me a good reservoir? MCP-655D, MCR-480, EK Supreme HF Full Nickel, Compression fittings 1/2" ID x 3/4" OD. Thanks

    p.d. Now is official, my MCR-480 for only CPU is "overkill"
    CPU: Phenom II X6 1090T @ 3.8GHz with NB @ 3000MHz both using 1.325V
    Cooling: EK Supreme HF Full Nickel + MCP655-D5 + MCR320-QP
    Mobo: Gigabyte 890FXA-UD5 Rev. 2.0 with F4 BIOS
    GPU: MSI GTX 680 Lightning 2GB
    RAM: 2x2GB Crucial Ballistix Tracer 1600MHz + 2x4GB G.Skill TridentX 2400MHz @ 1600MHz
    SSD: Crucial M4 256GB
    HDD: 2x500GB Itachi 3Gb/s
    Case: Cooler Master HAF X
    PSU: Corsair AX1200
    Windows 7 Pro x64
    Cooler Master CPU Cooler fight : Hyper TX3 Evo vs 212 Evo

  9. #9
    Water Cooled Moderator
    Overclockers.com Lead Editor
    hokiealumnus's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh, NC
    Author Profile Benching Profile Heatware Profile
    Thanks!!

    1) I considered it, but there are SO many options out there it would have made an already lengthy guide even longer. Fans are almost the most personal choice and should be chosen to fit a particular person's noise tastes, performance needs and radiator choice. As those are variables that change so much from person to person, I couldn't do the topic justice without going into a lengthy treatise on fans.

    2) Excellent point, I'll work on a mention of that when I have time. Quick answer for you - If you have and use dye, no less than every six months. Without it you could go up to a year. IMHO, of course.

    What style of res are you looking for? Do you prefer the tube-style (if so, vertical or horizontal)? Square? Bay res? Bling? There are quite a few options. A res is a res; as long as it serves its purpose, pick whichever one fits your style, budget and space.

    Enjoy benchmarks? Join the benching team!
    New to water cooling? Read the Beginner's Guide to Water Cooling Your PC.
    I.M.O.G. - "Night benching is the answer. Start sleeping every other day. Other than an occassional narcoleptic episode, its been wor"
    \m/ OverClockers mATX L33T Club \m/ - Join Now! - My mITX Build

  10. #10
    Quote Originally Posted by hokiealumnus View Post
    Thanks!!

    1) I considered it, but there are SO many options out there it would have made an already lengthy guide even longer. Fans are almost the most personal choice and should be chosen to fit a particular person's noise tastes, performance needs and radiator choice. As those are variables that change so much from person to person, I couldn't do the topic justice without going into a lengthy treatise on fans.

    2) Excellent point, I'll work on a mention of that when I have time. Quick answer for you - If you have and use dye, no less than every six months. Without it you could go up to a year. IMHO, of course.

    What style of res are you looking for? Do you prefer the tube-style (if so, vertical or horizontal)? Square? Bay res? Bling? There are quite a few options. A res is a res; as long as it serves its purpose, pick whichever one fits your style, budget and space.
    I only use distiller water with Silver KillCoil in "reservoir", so, I think that one year is fine right?

    Regarding the reservoir, a good one, not very big, not very expensive and that fit in a HAF X LoL. I think that tube-style vertical is the best option for me.
    CPU: Phenom II X6 1090T @ 3.8GHz with NB @ 3000MHz both using 1.325V
    Cooling: EK Supreme HF Full Nickel + MCP655-D5 + MCR320-QP
    Mobo: Gigabyte 890FXA-UD5 Rev. 2.0 with F4 BIOS
    GPU: MSI GTX 680 Lightning 2GB
    RAM: 2x2GB Crucial Ballistix Tracer 1600MHz + 2x4GB G.Skill TridentX 2400MHz @ 1600MHz
    SSD: Crucial M4 256GB
    HDD: 2x500GB Itachi 3Gb/s
    Case: Cooler Master HAF X
    PSU: Corsair AX1200
    Windows 7 Pro x64
    Cooler Master CPU Cooler fight : Hyper TX3 Evo vs 212 Evo

  11. #11
    5up3r m0d3r4t0r
    Overclockers.com Editor

    MattNo5ss's Avatar
    Join Date
    Aug 2008
    Location
    AL
    Author Profile Benching Profile Heatware Profile
    Is there something like the XSPC Res Top for a MCP655, a res that improves your pump?

    The only reason I got a res was b/c the XSPC Res Top improves my MCP355.
    i7 4770K | ASRock Z87M OC Formula | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | EVGA GTX780 SC ACX | ASUS Xonar Essence STX | 256GB OCZ Vertex 4 | SeaSonic SS-1000XP
    Pentium G3258 | ASUS Z87I-Deluxe | 2x8GB Crucial Ballistix DDR3-1600 8-8-8-24 1.35v | 5x2TB RAIDZ | Corsair CX430

    My Overclockers.com Articles | HWBot Profile | Heatware (101-0-0)

    Projects: Copper-Framed, MDF Station | PVC-Framed, MDF Station | Custom Cascade Cart/Case | Untitled TJ07 Build


  12. #12
    Water Cooled Moderator
    Overclockers.com Lead Editor
    hokiealumnus's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh, NC
    Author Profile Benching Profile Heatware Profile
    Yes, I think you'd be ok for a teardown/rebuild at the one year mark.

    As far as a reservoir, check out the res page at Sidewinder. Pretty much take your pick out of the stealth res or ek multioption reservoirs. I'm not familiar enough with them to know which has a better anti-cyclone insert though; sorry.

    Quote Originally Posted by MattNo5ss View Post
    Is there something like the XSPC Res Top for a MCP655, a res that improves your pump?

    The only reason I got a res was b/c the XSPC Res Top improves my MCP355.
    That improves the pump? I have no data. But there does exist one at this point for the 655. Found it at Sidewinder last night.

    Enjoy benchmarks? Join the benching team!
    New to water cooling? Read the Beginner's Guide to Water Cooling Your PC.
    I.M.O.G. - "Night benching is the answer. Start sleeping every other day. Other than an occassional narcoleptic episode, its been wor"
    \m/ OverClockers mATX L33T Club \m/ - Join Now! - My mITX Build

  13. #13
    Member
    Water Cooling Sticky Reading Enforcement Official
    m0r7if3r's Avatar
    Join Date
    Jun 2010
    Location
    Marietta, GA
    Author Profile Heatware Profile
    Quote Originally Posted by MattNo5ss View Post
    Is there something like the XSPC Res Top for a MCP655, a res that improves your pump?

    The only reason I got a res was b/c the XSPC Res Top improves my MCP355.
    the stock top for the d5 is already really good, there are some improvements to be seen with aftermarket tops, but not like with a ddc.

    @saint - koolance has some nice new tube reses you might wanna check out, EK's are pretty standard, though some have had leaking issues.
    If years were seasons, this December would be the December of our December.
    -Abed #sixseasonsandamovie

    Heat

  14. #14
    Senior Internet Fart Owenator's Avatar
    10 Year Badge
    Join Date
    Dec 2000
    Location
    Bear, Delaware
    Awesome write up Hokie!
    System: ASRock P67 Extreme6, i7-2600k @ 4.6 GHz, 16GiB Corsair Vengeance DDR3 1600, Galaxy GTX 570 & EVGA GTX570 in SLI @ stock, 120GB Corsair F120 SSD for Win 7 Pro x64, WD Caviar Black 1 TB for everything else, Lite-On Dual layer DVDRW, Cooler Master Silent Pro Gold 1200W PSU, CM690 II advanced case.
    Accessories: ACER 23" WS LCD + ACER 21" WS for web/TS/etc. DIY 4-way monitor stand. Logitech G35 headset, Idelazon Fang keypad, Logitech G9 mouse, Zalman FPS Gun mouse, Logitech Extreme 3D Pro joystick, momo racing wheel w/ pedals.
    Water Cooling : Replumbed to one single loop. Apogee GTZ CPU block, MCR220 w/ 2x Panaflo 120x38 'M's, MCR220 w/ 2x Panaflo 120x38 'H's, MCP350 w/ bored over Alphacoool top. MCP220 drive with second MCP350 in series w/first. 2x MCW60 GPU blocks Temps: TBD

    Blackbelt Ubercloxx0r My Current Rig My First WC Rig DIY Nvidia Surround Setup


  15. #15
    Thanks guys, I will created a thread for not do this a "personal" thread.
    CPU: Phenom II X6 1090T @ 3.8GHz with NB @ 3000MHz both using 1.325V
    Cooling: EK Supreme HF Full Nickel + MCP655-D5 + MCR320-QP
    Mobo: Gigabyte 890FXA-UD5 Rev. 2.0 with F4 BIOS
    GPU: MSI GTX 680 Lightning 2GB
    RAM: 2x2GB Crucial Ballistix Tracer 1600MHz + 2x4GB G.Skill TridentX 2400MHz @ 1600MHz
    SSD: Crucial M4 256GB
    HDD: 2x500GB Itachi 3Gb/s
    Case: Cooler Master HAF X
    PSU: Corsair AX1200
    Windows 7 Pro x64
    Cooler Master CPU Cooler fight : Hyper TX3 Evo vs 212 Evo

  16. #16
    Senior Member
    deeppow's Avatar
    10 Year Badge
    Join Date
    May 2002
    Location
    Los Alamos, NM
    Very nice job hokiealumnus! Some great pictures too, I'm jealous of such clean setups.

    I got started water cooling back in the days Bill Adams was around and he got me interested. After various stepping stones, I've ended up with an alternate water cooling setup that works very well but really isn't economical so I wouldn't seriously suggest it to others.

    I progressed from radiators to a chiller. The chiller of course isn't an economical approach but hanging around eBay for weeks finally yielded one at a "reasonable" price. I can run a higher overclock and still keep the CPU very cool. At this point, I've ended up with an external enclosure for the pump etc. Makes work in the computer easier but gota admit my setup is Rube-goldberg.
    Gigabyte Z97X-UD5H , Intel i7 4770K @4.7Ghz
    GSkill DDR3 2400 (2*4Gb) 9-11-11-31
    Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev
    EVGA GTX680,Klipsch Promedia 4.1
    Intel 510 120G, Crucial M4 120G, Sumsung 840Pro 512G
    Corsair 1050 in Corsair Graphite 730T
    Win7 64-bit

  17. #17
    Water Cooled Moderator
    Overclockers.com Lead Editor
    hokiealumnus's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh, NC
    Author Profile Benching Profile Heatware Profile
    Thanks! I'm jealous too. Only the messy example photos were mine (they were older systems before I got 'clean' with the single Lian Li photo at the end), so I'm just as jealous! Shazza and Ace. excel at making beautiful, clean loops. They have great company, mind you; they were just the two that sprang to mind to ask permission for including them at the time.

    Me? Well, I succumbed to the benching gods and my loop has since devolved into this for ease of transfer/portability. The Lian Li now houses an air cooled system.

    Enjoy benchmarks? Join the benching team!
    New to water cooling? Read the Beginner's Guide to Water Cooling Your PC.
    I.M.O.G. - "Night benching is the answer. Start sleeping every other day. Other than an occassional narcoleptic episode, its been wor"
    \m/ OverClockers mATX L33T Club \m/ - Join Now! - My mITX Build

  18. #18
    Senior Member
    deeppow's Avatar
    10 Year Badge
    Join Date
    May 2002
    Location
    Los Alamos, NM
    Quote Originally Posted by hokiealumnus View Post
    .... I succumbed to the benching gods and my loop has since devolved into this for ease of transfer/portability.
    Ahhh, a setup only a mother could love.
    Gigabyte Z97X-UD5H , Intel i7 4770K @4.7Ghz
    GSkill DDR3 2400 (2*4Gb) 9-11-11-31
    Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev
    EVGA GTX680,Klipsch Promedia 4.1
    Intel 510 120G, Crucial M4 120G, Sumsung 840Pro 512G
    Corsair 1050 in Corsair Graphite 730T
    Win7 64-bit

  19. #19
    Wants Old Title Back
    Didn't Get It
    Conumdrum's Avatar
    Join Date
    Sep 2007
    Location
    Las Vegas
    Author Profile
    I was really hoping this link Hokie just wrote would stay at the TOP of the current posts, in BIG BIG red BLING letters, and not buried in the sticky link. We know how little peeps start there. They spend 20 min typing the first question that are so easily answered by spending 20 minutes reading. Saves ALL of us time and effort..

    So, can it become the first post forever in the posts? And not lost somewhere?
    I want my old title back.
    Old beast is torn down.
    Will update later.

    900 watt (1500VA) UPS
    27" ASUS VG 3D/Nvidia V2 3D glasses and 24" Acer H243H

  20. #20
    Registered Ace.'s Avatar
    Join Date
    Jun 2010
    Location
    Germany
    Good Work Buddy

Page 1 of 10 1 2 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •