Results 1 to 2 of 2
  1. #1
    Member Same's Avatar
    Join Date
    Aug 2006
    Location
    Maryland, US
    Posts
    290

    Alienware 04VWF2 X58

    Hi,

    right now I have my Core i7 920 overclocked to 3.33ghz, at 166.66 x 20. There is an overclocking section built in that allows for the adjustment of certain voltages, RAM overclocking, and changing the BUS Speed. However there is no way to change the voltage on the CPU from the standard in BIOS. I was wondering if there is anyway around this. Or if I am wasting my time.

    Thank you,
    Sam
    Processor: Intel Core i7 8320 3.6ghz @ 4.3ghz
    Memory: Crucial 16GB DDR3-1600 (2 x 8GB)
    Motherboard: GA-X79-UP4
    Graphics: MSI GTX 670 Power Edition OC
    HDD: 1TB (2 x 500GB)
    Case: Zalman Z12 Plus
    OS: 1TB Win Server 2012. 1TB Linux
    Power Supply: Corsair 850W
    Monitor: Hannspree 28" & Samsung 23"

    Asus Infinity 10.1" Tablet, nVidia Tegra4 w/1GB RAM, ASUS TF700T, 1920x1080 Screen
    Android 4.2.2 dualboot w/Ubuntu 13.10

  2. #2
    Member
    Join Date
    Nov 2002
    Location
    Las Vegas, NV
    Posts
    2,831
    Well, thats wierd because you seem to be able to adjust QPI and IOH voltages but only display the CPU Voltage.

    Obviously its auto-volting so you can try going higher and see what it does. Id bump the QPI to 1.22-1.26v, leave the IOH, and bump the bclock and see what she does. Be careful and monitor the vcore in CPUz while you stress test. It might scale OK with auto voltage you never know.
    Asus P8P67
    Intel i7-2600k @ 4.9ghz
    GSkill Ripjaws 8gb 1600mhz c8
    EVGA GTX780 ACX 1228//1650
    OCZ Agility 2 240gb, Corsair Force 3 180gb, (2)WD 1tb Black
    HAF 932w/ Corsair HX750
    Heat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •