- Joined
- Aug 30, 2002
- Location
- Southern USA
Here's my results so far at attempting a 3 Ghz OC on a Q6600 with B2 stepping. I've heard these chips can get up to 3.6 on air. I'm getting the following temps/voltages under prime 95 load. I haven't done the vdroop mod yet. Which software is the most accurate for core temps and voltage? At these temps can I go higher in voltage? Is it OK to run prime 95 for 6 hours with these temps?
Speedfan4.44
Vcore 1.34v
System: 45C
CPU: 65C
Core 0: 62C
Core 1: 64C
Core Temp 1.0
VID=1.3250v
Core 0: 58C
Core 1: 59C
Core 2: 55C
Core 3: 51C
CPU Z (latest version)
Current Voltage: 1.344v
Everlast Ultimate
CPU core: 1.34v
CPU: 65C
CPU 1: 62C
CPU 2: 64C
CPU 3: 59C
CPU 4: 56C
MCP: 45
System specs:
EVGA 680i 122-CK-NF68-A1
Core 2 Quad Q6600 Kentsfield B2 Stepping
Arctic Cooling Freezer 7 Pro CPU fan
4 GB CORSAIR Dominator 1066Mhz CM2X1024-8500C5D
CMXAF1 Ram fan
Two GTX 260 Sonic 216SP in SLI mode
Antec Nine Hundred Black Steel ATX Mid Tower
Antec HGC900 PS
SyncMaster 216BW Monitor
Lite-On IHAS124-04 DVD
Seagate Barracuda 1TB HD
BIOS Settings
Flashed to v P33
Vcore Voltage: 1.41250
CPU FSB: 1.4
[nForce SPP: 1.45
nForce MCP: 1.525
HT nForce SPP <-> MCP: 1.34
HPET Function - Disabled
Nvidia GPU Ex: Disabled
LinkBoost: Disabled
System Bios Cacheable: Disabled
Cpu spread spectrum: Disabled
PCIe spread spectrum: Disabled
HT spread spectrum: Disabled
Sata spread spectrum: Disabled
Sli-Ready Memory: [FSB - Memory Clock Mode: Unlinked
PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200
nForce SPP --> nForce MCP [5 x]
nForce SPP <-- nForce MCP [5 x]
CPU Multiplier: 9x
x FSB - Memory Ratio: Auto
FSB (QDR), Mhz: 1340 (means 335FSB)
Actual FSB (QDR), Mhz: 1066.7
MEM (DDR), Mhz: 800 (means 400mhz speeds)
Actual MEM (DDR), Mhz: 800
Memory Timing Setting: Optimal
tCL (CAS Latency):5
tRCD: 5
tRP: 5
tRAS: 15
Command Per Clock (CMD): 2T
Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Limit CPUID MaxVal: Disabled
Intel SpeedStep: Disabled
PPM mode: Native Mode
CPU Thermal Control: Disabled
C1E Enhanced Halt State: Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
CPU Core 0: Enabled
CPU Core 1: Enabled
CPU Core 2: Enabled
CPU Core 3: Enabled
Speedfan4.44
Vcore 1.34v
System: 45C
CPU: 65C
Core 0: 62C
Core 1: 64C
Core Temp 1.0
VID=1.3250v
Core 0: 58C
Core 1: 59C
Core 2: 55C
Core 3: 51C
CPU Z (latest version)
Current Voltage: 1.344v
Everlast Ultimate
CPU core: 1.34v
CPU: 65C
CPU 1: 62C
CPU 2: 64C
CPU 3: 59C
CPU 4: 56C
MCP: 45
System specs:
EVGA 680i 122-CK-NF68-A1
Core 2 Quad Q6600 Kentsfield B2 Stepping
Arctic Cooling Freezer 7 Pro CPU fan
4 GB CORSAIR Dominator 1066Mhz CM2X1024-8500C5D
CMXAF1 Ram fan
Two GTX 260 Sonic 216SP in SLI mode
Antec Nine Hundred Black Steel ATX Mid Tower
Antec HGC900 PS
SyncMaster 216BW Monitor
Lite-On IHAS124-04 DVD
Seagate Barracuda 1TB HD
BIOS Settings
Flashed to v P33
Vcore Voltage: 1.41250
CPU FSB: 1.4
[nForce SPP: 1.45
nForce MCP: 1.525
HT nForce SPP <-> MCP: 1.34
HPET Function - Disabled
Nvidia GPU Ex: Disabled
LinkBoost: Disabled
System Bios Cacheable: Disabled
Cpu spread spectrum: Disabled
PCIe spread spectrum: Disabled
HT spread spectrum: Disabled
Sata spread spectrum: Disabled
Sli-Ready Memory: [FSB - Memory Clock Mode: Unlinked
PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200
nForce SPP --> nForce MCP [5 x]
nForce SPP <-- nForce MCP [5 x]
CPU Multiplier: 9x
x FSB - Memory Ratio: Auto
FSB (QDR), Mhz: 1340 (means 335FSB)
Actual FSB (QDR), Mhz: 1066.7
MEM (DDR), Mhz: 800 (means 400mhz speeds)
Actual MEM (DDR), Mhz: 800
Memory Timing Setting: Optimal
tCL (CAS Latency):5
tRCD: 5
tRP: 5
tRAS: 15
Command Per Clock (CMD): 2T
Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Limit CPUID MaxVal: Disabled
Intel SpeedStep: Disabled
PPM mode: Native Mode
CPU Thermal Control: Disabled
C1E Enhanced Halt State: Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
CPU Core 0: Enabled
CPU Core 1: Enabled
CPU Core 2: Enabled
CPU Core 3: Enabled